Exam 27: Ford 6r60 Zf6hp26

After installing the low/reverse clutch pack into the transmission of a Ford 6R60 transmission, the intermediate support housing should be installed. The support tabs for the housing and the snap ring ends should be at the __________ and the __________ positions.

When removing the snap ring during disassembly of the forward/overdrive clutch assembly, what precaution should be taken to prevent damage to the forward clutch housing?

Identify the transmission fluid required by the Ford 6R60 transmission.

The output shaft speed sensor of 6R60 transmission is a(n) ________

To obtain the six gear ratios, ________ multidisc clutches are used in the 6R60 transmission.

What does the transmission use to attain the six gear ratios?

When rebuilding the intermediate clutch assembly, all of the following statements with respect to measuring clutch pack clearance are true except:

The output shaft speed sensor of 6R60 transmission is a(n) ________

Technician A says that the 6R60 transmission has six forward gears and one reverse. Technician B says that six multidisc clutches are used in this transmission. Who is correct?

The 6R60 transmission does not contain any bands, servos, or dog clutches.

You are testing the solenoids from a 6R60 transmission and find that all of the solenoids have a resistance reading of 5.5 ohms except solenoid E which has 10.5 ohms. Tech A states that the solenoids will use more current than normal. Tech B states that the solenoids will use less current than normal. Who is correct?

What should be the resistance of shift solenoid E at room temperature?

Tech A says that the 6R60 does not have an overdrive gear. Tech B says that the 6R60 is a dual overdrive unit. Who is correct?

Identify the gear ratio of the fifth gear of a 6R60 transmission.

Tech A states that the 6R60 shift solenoids are pulse width modulated. Tech B states that the shift solenoids are variable force solenoids. Who is correct?