Question 1

Refer to the exhibit. Which command configures a floating static route to provide a backup to the primary link?

Accepted Answer

A)  ip route 209.165.200.224 255.255.255.224 209.165.202.129 254 
B)  ip route 209.165.201.0 255.255.255.224 209.165.202.130 
C)  ip route 0.0.0.0 0.0.0.0 209.165.200.224 
D)  ip route 0.0.0.0 0.0.0.0 209.165.202.131 
A)  ip route 209.165.200.224 255.255.255.224 209.165.202.129 254 
B)  ip route 209.165.201.0 255.255.255.224 209.165.202.130 
C)  ip route 0.0.0.0 0.0.0.0 209.165.200.224 
D)  ip route 0.0.0.0 0.0.0.0 209.165.202.131

Question 2

A network engineer in the GUI of WCS version 7 wants to add an access point to a map. Where can this command be found within the drop-down menu?

Accepted Answer

A)  Monitor > Maps 
B)  Reports > Maps 
C)  Monitor > Network Summary 
D)  Configure > Maps 
A)  Monitor > Maps 
B)  Reports > Maps 
C)  Monitor > Network Summary 
D)  Configure > Maps

Question 3

Which command is used to specify the delay time in seconds for LLDP to initialize on any interface?

Accepted Answer

A)  lldp timer 
B)  lldp tlv-select 
C)  lldp reinit 
D)  lldp holdtime 
A)  lldp timer 
B)  lldp tlv-select 
C)  lldp reinit 
D)  lldp holdtime

Question 4

Which device performs stateful inspection of traffic?

Accepted Answer

A)  switch 
B)  firewall 
C)  access point 
D)  wireless controller 
A)  switch 
B)  firewall 
C)  access point 
D)  wireless controller

Question 5

Refer to the exhibit. What configuration for RTR-1 denies SSH access from PC-1 to any RTR-1 interface and allows all other traffic?

Accepted Answer

A)    
B)    
C)    
D)    
A)    
B)    
C)    
D)

Question 6

When the active router in an HSRP group fails, what router assumes the role and forwards packets?

Accepted Answer

A)  forwarding 
B)  listening 
C)  standby 
D)  backup 
A)  forwarding 
B)  listening 
C)  standby 
D)  backup

Question 7

What is the binary pattern of unique ipv6 unique local address?

Accepted Answer

A)  00000000 
B)  11111100 
C)  11111111 
D)  11111101 
A)  00000000 
B)  11111100 
C)  11111111 
D)  11111101

Question 8

Which attribute does a router use to select the best path when two or more different routes to the same destination exist from two different routing protocols?

Accepted Answer

A)  dual algorithm 
B)  metric 
C)  administrative distance 
D)  hop count 
A)  dual algorithm 
B)  metric 
C)  administrative distance 
D)  hop count

Question 9

Which statement identifies the functionality of virtual machines?

Accepted Answer

A)  The hypervisor communicates on Layer 3 without the need for additional resources. 
B)  Each hypervisor can support a single virtual machine and a single software switch. 
C)  The hypervisor can virtualize physical components including CPU, memory, and storage. 
D)  Virtualized servers run most efficiently when they are physically connected to a switch that is separate from the hypervisor. 
A)  The hypervisor communicates on Layer 3 without the need for additional resources. 
B)  Each hypervisor can support a single virtual machine and a single software switch. 
C)  The hypervisor can virtualize physical components including CPU, memory, and storage. 
D)  Virtualized servers run most efficiently when they are physically connected to a switch that is separate from the hypervisor.

Question 10

Refer to the exhibit. Which path is used by the router for Internet traffic?

Accepted Answer

A)  209.165.200.0/27 
B)  0.0.0.0/0 
C)  10.10.13.0/24 
D)  10.10.10.0/28 
A)  209.165.200.0/27 
B)  0.0.0.0/0 
C)  10.10.13.0/24 
D)  10.10.10.0/28

Question 11

A packet is destined for 10.10.1.22. Which static route does the router choose to forward the packet?

Accepted Answer

A)  ip route 10.10.1.0 255.255.255.240 10.10.255.1 
B)  ip route 10.10.1.20 255.255.255.252 10.10.255.1 
C)  ip route 10.10.1.16 255.255.255.252 10.10.255.1 
D)  ip route 10.10.1.20 255.255.255.254 10.10.255.1 
A)  ip route 10.10.1.0 255.255.255.240 10.10.255.1 
B)  ip route 10.10.1.20 255.255.255.252 10.10.255.1 
C)  ip route 10.10.1.16 255.255.255.252 10.10.255.1 
D)  ip route 10.10.1.20 255.255.255.254 10.10.255.1

Question 12

A corporate office uses four floors in a building. Floor 1 has 24 users. Floor 2 has 29 users. Floor 3 has 28 users. Floor 4 has 22 users. Which subnet summarizes and gives the most efficient distribution of IP addresses for the router configuration?

Accepted Answer

A)  192.168.0.0/24 as summary and 192.168.0.0/28 for each floor 
B)  192.168.0.0/23 as summary and 192.168.0.0/25 for each floor 
C)  192.168.0.0/25 as summary and 192.168.0.0/27 for each floor 
D)  192.168.0.0/26 as summary and 192.168.0.0/29 for each floor 
A)  192.168.0.0/24 as summary and 192.168.0.0/28 for each floor 
B)  192.168.0.0/23 as summary and 192.168.0.0/25 for each floor 
C)  192.168.0.0/25 as summary and 192.168.0.0/27 for each floor 
D)  192.168.0.0/26 as summary and 192.168.0.0/29 for each floor

Question 13

Which type of information resides on a DHCP server?

Accepted Answer

A)  a list of the available IP addresses in a pool 
B)  a list of public IP addresses and their corresponding names 
C)  usernames and passwords for the end users in a domain 
D)  a list of statically assigned MAC addresses 
A)  a list of the available IP addresses in a pool 
B)  a list of public IP addresses and their corresponding names 
C)  usernames and passwords for the end users in a domain 
D)  a list of statically assigned MAC addresses

Question 14

Which function does an SNMP agent perform?

Accepted Answer

A)  It sends information about MIB variables in response to requests from the NMS 
B)  It manages routing between Layer 3 devices in a network 
C)  It coordinates user authentication between a network device and a TACACS+ or RADIUS server 
D)  It requests information from remote network nodes about catastrophic system events 
A)  It sends information about MIB variables in response to requests from the NMS 
B)  It manages routing between Layer 3 devices in a network 
C)  It coordinates user authentication between a network device and a TACACS+ or RADIUS server 
D)  It requests information from remote network nodes about catastrophic system events

Question 15

Refer to exhibit. What Administrative distance has route to 192.168.10.1?

Accepted Answer

A)  1 
B)  90 
C)  110 
D)  120 
A)  1 
B)  90 
C)  110 
D)  120

Question 16

Which result occurs when PortFast is enabled on an interface that is connected to another switch?

Accepted Answer

A)  Root port choice and spanning tree recalculation are accelerated when a switch link goes down. 
B)  After spanning tree converges, PortFast shuts down any port that receives BPDUs. 
C)  VTP is allowed to propagate VLAN configuration information from switch to switch automatically. 
D)  Spanning tree may fail to detect a switching loop in the network that causes broadcast storms. 
A)  Root port choice and spanning tree recalculation are accelerated when a switch link goes down. 
B)  After spanning tree converges, PortFast shuts down any port that receives BPDUs. 
C)  VTP is allowed to propagate VLAN configuration information from switch to switch automatically. 
D)  Spanning tree may fail to detect a switching loop in the network that causes broadcast storms.

Question 17

Which command is used to verify the DHCP relay agent address that has been set up on your Cisco IOS router?

Accepted Answer

A)  show ip interface brief 
B)  show ip dhcp bindings 
C)  show ip route 
D)  show ip interface 
E)  show interface
F) show ip dhcp pool 
A)  show ip interface brief 
B)  show ip dhcp bindings 
C)  show ip route 
D)  show ip interface 
E)  show interface
F) show ip dhcp pool

Question 18

Which IPv6 address type communication between subnets and cannot route on the Internet?

Accepted Answer

A)  link-local 
B)  unique local 
C)  multicast 
D)  global unicast 
A)  link-local 
B)  unique local 
C)  multicast 
D)  global unicast

Question 19

Which configuration management mechanism uses TCP port 22 by default when communicating with managed nodes?

Accepted Answer

A)  Ansible 
B)  Python 
C)  Puppet 
D)  Chef 
A)  Ansible 
B)  Python 
C)  Puppet 
D)  Chef

Question 20

Refer to the exhibit. Which configuration issue is preventing the OSPF neighbor relationship from being established between the two routers?

Accepted Answer

A)  R1 has an incorrect network command for interface Gi1/0. R1 has an incorrect network command for interface Gi1/0. 
B)  R2 should have its network command in area 1. R2 should have its command in area 1. 
C)  R1 interface Gi1/0 has a larger MTU size. 
D)  R2 is using the passive-interface default command. R2 is using the passive-interface default command. 
A)  R1 has an incorrect network command for interface Gi1/0. R1 has an incorrect network command for interface Gi1/0. 
B)  R2 should have its network command in area 1. R2 should have its command in area 1. 
C)  R1 interface Gi1/0 has a larger MTU size. 
D)  R2 is using the passive-interface default command. R2 is using the passive-interface default command.

Exam 4: Cisco Certified Network Associate (CCNA)

Refer to the exhibit. Which command configures a floating static route to provide a backup to the primary link?

A network engineer in the GUI of WCS version 7 wants to add an access point to a map. Where can this command be found within the drop-down menu?

Which command is used to specify the delay time in seconds for LLDP to initialize on any interface?

Which device performs stateful inspection of traffic?

Refer to the exhibit. What configuration for RTR-1 denies SSH access from PC-1 to any RTR-1 interface and allows all other traffic?

When the active router in an HSRP group fails, what router assumes the role and forwards packets?

What is the binary pattern of unique ipv6 unique local address?

Which attribute does a router use to select the best path when two or more different routes to the same destination exist from two different routing protocols?

Which statement identifies the functionality of virtual machines?

Refer to the exhibit. Which path is used by the router for Internet traffic?

A packet is destined for 10.10.1.22. Which static route does the router choose to forward the packet?

A corporate office uses four floors in a building. Floor 1 has 24 users. Floor 2 has 29 users. Floor 3 has 28 users. Floor 4 has 22 users. Which subnet summarizes and gives the most efficient distribution of IP addresses for the router configuration?

Which type of information resides on a DHCP server?

Which function does an SNMP agent perform?

Refer to exhibit. What Administrative distance has route to 192.168.10.1?

Which result occurs when PortFast is enabled on an interface that is connected to another switch?

Which command is used to verify the DHCP relay agent address that has been set up on your Cisco IOS router?

Which IPv6 address type communication between subnets and cannot route on the Internet?

Which configuration management mechanism uses TCP port 22 by default when communicating with managed nodes?

Refer to the exhibit. Which configuration issue is preventing the OSPF neighbor relationship from being established between the two routers?

Supporting Cisco Data Center System Devices (DCTECH)

Cisco Certified Technician Routing & Switching (RSTECH)

Understanding Cisco Cybersecurity Operations Fundamentals (CBROPS)

Managing Industrial Networks with Cisco Networking Technologies (IMINS)

DevNet Associate (DEVASC)

Conducting Forensic Analysis and Incident Response Using Cisco CyberOps Technologies (CBRFIR)

Implementing Cisco Enterprise Advanced Routing and Services (ENARSI)

Implementing Cisco SD-WAN Solutions (ENSDWI)

Designing Cisco Enterprise Networks (ENSLD)

Designing Cisco Enterprise Wireless Networks (300-425 ENWLSD)

Implementing Cisco Enterprise Wireless Networks (300-430 ENWLSI)

Automating Cisco Enterprise Solutions (ENAUTO)

Implementing Cisco Service Provider Advanced Routing Solutions (SPRI)

Implementing Cisco Service Provider VPN Services (SPVI)

Designing Cisco Data Center Infrastructure (DCID)

Troubleshooting Cisco Data Center Infrastructure (DCIT)

Implementing Cisco Application Centric Infrastructure (DCACI)

Configuring Cisco MDS 9000 Series Switches (DCSAN)

Implementing Cisco Application Centric Infrastructure - Advanced

Automating Cisco Data Center Solutions (DCAUTO)

Securing Networks with Cisco Firepower (300-710 SNCF)

Implementing and Configuring Cisco Identity Services Engine (300-715 SISE)

Securing Email with Cisco Email Security Appliance (300-720 SESA)

Securing the Web with Cisco Web Security Appliance (300-725 SWSA)

Implementing Secure Solutions with Virtual Private Networks (SVPN 300-730)

Automating Cisco Security Solutions (SAUTO)

Implementing Cisco Collaboration Applications (CLICA)

Implementing Cisco Advanced Call Control and Mobility Services (CLASSM)

Implementing Cisco Collaboration Cloud and Edge Solutions

Implementing Cisco Collaboration Conferencing

Automating Cisco Collaboration Solutions (CLAUTO)

Implementing DevOps Solutions and Practices using Cisco Platforms (DEVOPS)

Developing Solutions Using Cisco IoT and Edge Platforms (DEVIOT)

Developing Applications for Cisco Webex and Webex Devices (DEVWBX)

Performing CyberOps Using Core Security Technologies (CBRCOR)

Implementing Cisco Enterprise Network Core Technologies (ENCOR)

Implementing and Operating Cisco Service Provider Network Core Technologies (SPCOR)

Implementing and Operating Cisco Data Center Core Technologies (DCCOR)

Implementing and Operating Cisco Security Core Technologies

Implementing Cisco Collaboration Core Technologies (CLCOR)

Developing Applications using Cisco Core Platforms and APIs (DEVCOR)

CCDE Design Written

Deploying Cisco Unified Contact Center Express

Cisco Meraki Solutions Specialist

Securing Cisco Networks with Sourcefire FireAMP Endpoints

Designing Cisco Unified Contact Center Enterprise (UCCED)

Implementing and Supporting Cisco Unified Contact Center Enterprise (UCCEIS)

Cisco Collaboration SaaS Authorization Exam

Cisco Security Architecture for System Engineers

Adopting The Cisco Business Architecture Approach (DTBAA)

Cisco Customer Success Manager (CSM)

Mastering The Cisco Business Architecture Discipline (DTBAD)

Filters