Question 1

Which of the following dynamic routing protocols are Distance Vector routing protocols?

Accepted Answer

A)  IS-IS 
B)  EIGRP 
C)  OSPF 
D)  BGP 
E)  RIP 
A)  IS-IS 
B)  EIGRP 
C)  OSPF 
D)  BGP 
E)  RIP

Question 2

Which two WAN architecture options help a business scalability and reliability for the network? (Choose two.)

Accepted Answer

A)  asychronous routing 
B)  single-homed branches 
C)  dual-homed branches 
D)  static routing 
E)  dynamic routing 
A)  asychronous routing 
B)  single-homed branches 
C)  dual-homed branches 
D)  static routing 
E)  dynamic routing

Question 3

What is the expected outcome when an EUI-64 address is generated?

Accepted Answer

A)  The interface ID is configured as a random 64-bit value 
B)  The characters FE80 are inserted at the beginning of the MAC address of the interface 
C)  The seventh bit of the original MAC address of the interface is inverted 
D)  The MAC address of the interface is used as the interface ID without modification 
A)  The interface ID is configured as a random 64-bit value 
B)  The characters FE80 are inserted at the beginning of the MAC address of the interface 
C)  The seventh bit of the original MAC address of the interface is inverted 
D)  The MAC address of the interface is used as the interface ID without modification

Question 4

Refer to the exhibit. To which device does Router1 send packets that are destined to host 10.10.13.165?

Accepted Answer

A)  Router2 
B)  Router3 
C)  Router4 
D)  Router5 
A)  Router2 
B)  Router3 
C)  Router4 
D)  Router5

Question 5

Refer to the exhibit. After the configuration is applied, the two routers fail to establish an OSPF neighbor relationship. What is the reason for the problem?

Accepted Answer

A)  The OSPF process IDs are mismatched 
B)  The network statement on Router1 is misconfigured 
C)  Router2 is using the default hello timer 
D)  The OSPF router IDs are mismatched 
A)  The OSPF process IDs are mismatched 
B)  The network statement on Router1 is misconfigured 
C)  Router2 is using the default hello timer 
D)  The OSPF router IDs are mismatched

Question 6

Which Cisco IOS command will indicate that interface GigabitEthernet 0/0 is configured via DHCP?

Accepted Answer

A)  show ip interface GigabitEthernet 0/0 dhcp 
B)  show interface GigabitEthernet 0/0 
C)  show ip interface dhcp 
D)  show ip interface GigabitEthernet 0/0 
E)  show ip interface GigabitEthernet 0/0 brief 
A)  show ip interface GigabitEthernet 0/0 dhcp 
B)  show interface GigabitEthernet 0/0 
C)  show ip interface dhcp 
D)  show ip interface GigabitEthernet 0/0 
E)  show ip interface GigabitEthernet 0/0 brief

Question 7

A user configured OSPF and advertised the Gigabit Ethernet interface in OSPF. By default, to which type of OSPF network does this interface belong?

Accepted Answer

A)  point-to-multipoint 
B)  point-to-point 
C)  broadcast 
D)  nonbroadcast 
A)  point-to-multipoint 
B)  point-to-point 
C)  broadcast 
D)  nonbroadcast

Question 8

Which command prevents passwords from being stored in the configuration as plain text on a router or switch?

Accepted Answer

A)  enable secret 
B)  enable password 
C)  service password-encryption 
D)  username cisco password encrypt 
A)  enable secret 
B)  enable password 
C)  service password-encryption 
D)  username cisco password encrypt

Question 9

Refer to the exhibit. Which type of configuration is represented in the output?

Accepted Answer

A)  Ansible 
B)  JSON 
C)  Chef 
D)  Puppet 
A)  Ansible 
B)  JSON 
C)  Chef 
D)  Puppet

Question 10

Which spanning-tree enhancement avoids the learning and listening states and immediately places ports in the forwarding state?

Accepted Answer

A)  BPDUfilter 
B)  PortFast 
C)  Backbonefast 
D)  BPDUguard 
A)  BPDUfilter 
B)  PortFast 
C)  Backbonefast 
D)  BPDUguard

Question 11

What are two reasons a network administrator would use CDP? (Choose two.)

Accepted Answer

A)  to verify the type of cable interconnecting two devices 
B)  to determine the status of network services on a remote device 
C)  to obtain VLAN information from directly connected switches 
D)  to verify Layer 2 connectivity between two devices when Layer 3 fails 
E)  to obtain the IP address of a connected device in order to telnet to the device
F) to determine the status of the routing protocols between directly connected routers 
A)  to verify the type of cable interconnecting two devices 
B)  to determine the status of network services on a remote device 
C)  to obtain VLAN information from directly connected switches 
D)  to verify Layer 2 connectivity between two devices when Layer 3 fails 
E)  to obtain the IP address of a connected device in order to telnet to the device
F) to determine the status of the routing protocols between directly connected routers

Question 12

Router R1 must send all traffic without a matching routing-table entry to 192.168.1.1. Which configuration accomplishes this task?

Accepted Answer

A)  R1# Config t R1(config)# ip routing R1(config)# ip route default-route 192.168.1.1 R1# Config t R1(config)# ip routing ip route default-route 192.168.1.1 
B)  R1(config)# ip route 192.168.1.1 0.0.0.0 0.0.0.0 ip route 192.168.1.1 0.0.0.0 0.0.0.0 
C)  R1(config)# ip route 0.0.0.0 0.0.0.0 192.168.1.1 ip route 0.0.0.0 0.0.0.0 192.168.1.1 
D)  R1(config)# ip default-gateway 192.168.1.1 ip default-gateway 192.168.1.1 
A)  R1# Config t R1(config)# ip routing R1(config)# ip route default-route 192.168.1.1 R1# Config t R1(config)# ip routing ip route default-route 192.168.1.1 
B)  R1(config)# ip route 192.168.1.1 0.0.0.0 0.0.0.0 ip route 192.168.1.1 0.0.0.0 0.0.0.0 
C)  R1(config)# ip route 0.0.0.0 0.0.0.0 192.168.1.1 ip route 0.0.0.0 0.0.0.0 192.168.1.1 
D)  R1(config)# ip default-gateway 192.168.1.1 ip default-gateway 192.168.1.1

Question 13

Which unified access point mode continues to serve wireless clients after losing connectivity to the Cisco Wireless LAN Controller?

Accepted Answer

A)  local 
B)  mesh 
C)  flexconnect 
D)  sniffer 
A)  local 
B)  mesh 
C)  flexconnect 
D)  sniffer

Question 14

What is the default behavior of a Layer 2 switch when a frame with an unknown destination MAC address is received?

Accepted Answer

A)  The Layer 2 switch forwards the packet and adds the destination MAC address to its MAC address table. 
B)  The Layer 2 switch sends a copy of a packet to CPU for destination MAC address learning. 
C)  The Layer 2 switch floods packets to all ports except the receiving port in the given VLAN. 
D)  The Layer 2 switch drops the received frame. 
A)  The Layer 2 switch forwards the packet and adds the destination MAC address to its MAC address table. 
B)  The Layer 2 switch sends a copy of a packet to CPU for destination MAC address learning. 
C)  The Layer 2 switch floods packets to all ports except the receiving port in the given VLAN. 
D)  The Layer 2 switch drops the received frame.

Question 15

R1 has learned route 10.10.10.0/24 via numerous routing protocols. Which route is installed?

Accepted Answer

A)  route with the next hop that has the highest IP 
B)  route with the lowest cost 
C)  route with the lowest administrative distance 
D)  route with the shortest prefix length 
A)  route with the next hop that has the highest IP 
B)  route with the lowest cost 
C)  route with the lowest administrative distance 
D)  route with the shortest prefix length

Question 16

Which networking function occurs on the data plane?

Accepted Answer

A)  processing inbound SSH management traffic 
B)  sending and receiving OSPF Hello packets 
C)  facilitates spanning-tree elections 
D)  forwarding remote client/server traffic 
A)  processing inbound SSH management traffic 
B)  sending and receiving OSPF Hello packets 
C)  facilitates spanning-tree elections 
D)  forwarding remote client/server traffic

Question 17

Which configuration register value can you set on a Cisco device so that it ignores the NVRAM when it boots?

Accepted Answer

A)  0x2124 
B)  0x2120 
C)  0x2142 
D)  0x2102 
A)  0x2124 
B)  0x2120 
C)  0x2142 
D)  0x2102

Question 18

What are two recommendations for protecting network ports from being exploited when located in an office space outside of an IT closet? (Choose two.)

Accepted Answer

A)  enable the PortFast feature on ports 
B)  configure static ARP entries 
C)  configure ports to a fixed speed 
D)  implement port-based authentication 
E)  shut down unused ports 
A)  enable the PortFast feature on ports 
B)  configure static ARP entries 
C)  configure ports to a fixed speed 
D)  implement port-based authentication 
E)  shut down unused ports

Question 19

Which type of attack is mitigated by dynamic ARP inspection?

Accepted Answer

A)  DDoS 
B)  malware 
C)  man-in-the-middle 
D)  worm 
A)  DDoS 
B)  malware 
C)  man-in-the-middle 
D)  worm

Question 20

You are configuring SNMPv1/v2c on a WLC. What should you do for improved security?

Accepted Answer

A)  Remove the default SNMPv1 community. 
B)  Remove the default SNMPv1 and SNMPv2 communities. 
C)  Remove the default SNMPv2 community. 
D)  Remove the default SNMPv3 users. 
A)  Remove the default SNMPv1 community. 
B)  Remove the default SNMPv1 and SNMPv2 communities. 
C)  Remove the default SNMPv2 community. 
D)  Remove the default SNMPv3 users.

Exam 4: Cisco Certified Network Associate (CCNA)

Which of the following dynamic routing protocols are Distance Vector routing protocols?

Which two WAN architecture options help a business scalability and reliability for the network? (Choose two.)

What is the expected outcome when an EUI-64 address is generated?

Refer to the exhibit. To which device does Router1 send packets that are destined to host 10.10.13.165?

Refer to the exhibit. After the configuration is applied, the two routers fail to establish an OSPF neighbor relationship. What is the reason for the problem?

Which Cisco IOS command will indicate that interface GigabitEthernet 0/0 is configured via DHCP?

A user configured OSPF and advertised the Gigabit Ethernet interface in OSPF. By default, to which type of OSPF network does this interface belong?

Which command prevents passwords from being stored in the configuration as plain text on a router or switch?

Refer to the exhibit. Which type of configuration is represented in the output?

Which spanning-tree enhancement avoids the learning and listening states and immediately places ports in the forwarding state?

What are two reasons a network administrator would use CDP? (Choose two.)

Router R1 must send all traffic without a matching routing-table entry to 192.168.1.1. Which configuration accomplishes this task?

Which unified access point mode continues to serve wireless clients after losing connectivity to the Cisco Wireless LAN Controller?

What is the default behavior of a Layer 2 switch when a frame with an unknown destination MAC address is received?

R1 has learned route 10.10.10.0/24 via numerous routing protocols. Which route is installed?

Which networking function occurs on the data plane?

Which configuration register value can you set on a Cisco device so that it ignores the NVRAM when it boots?

What are two recommendations for protecting network ports from being exploited when located in an office space outside of an IT closet? (Choose two.)

Which type of attack is mitigated by dynamic ARP inspection?

You are configuring SNMPv1/v2c on a WLC. What should you do for improved security?

Supporting Cisco Data Center System Devices (DCTECH)

Cisco Certified Technician Routing & Switching (RSTECH)

Understanding Cisco Cybersecurity Operations Fundamentals (CBROPS)

Managing Industrial Networks with Cisco Networking Technologies (IMINS)

DevNet Associate (DEVASC)

Conducting Forensic Analysis and Incident Response Using Cisco CyberOps Technologies (CBRFIR)

Implementing Cisco Enterprise Advanced Routing and Services (ENARSI)

Implementing Cisco SD-WAN Solutions (ENSDWI)

Designing Cisco Enterprise Networks (ENSLD)

Designing Cisco Enterprise Wireless Networks (300-425 ENWLSD)

Implementing Cisco Enterprise Wireless Networks (300-430 ENWLSI)

Automating Cisco Enterprise Solutions (ENAUTO)

Implementing Cisco Service Provider Advanced Routing Solutions (SPRI)

Implementing Cisco Service Provider VPN Services (SPVI)

Designing Cisco Data Center Infrastructure (DCID)

Troubleshooting Cisco Data Center Infrastructure (DCIT)

Implementing Cisco Application Centric Infrastructure (DCACI)

Configuring Cisco MDS 9000 Series Switches (DCSAN)

Implementing Cisco Application Centric Infrastructure - Advanced

Automating Cisco Data Center Solutions (DCAUTO)

Securing Networks with Cisco Firepower (300-710 SNCF)

Implementing and Configuring Cisco Identity Services Engine (300-715 SISE)

Securing Email with Cisco Email Security Appliance (300-720 SESA)

Securing the Web with Cisco Web Security Appliance (300-725 SWSA)

Implementing Secure Solutions with Virtual Private Networks (SVPN 300-730)

Automating Cisco Security Solutions (SAUTO)

Implementing Cisco Collaboration Applications (CLICA)

Implementing Cisco Advanced Call Control and Mobility Services (CLASSM)

Implementing Cisco Collaboration Cloud and Edge Solutions

Implementing Cisco Collaboration Conferencing

Automating Cisco Collaboration Solutions (CLAUTO)

Implementing DevOps Solutions and Practices using Cisco Platforms (DEVOPS)

Developing Solutions Using Cisco IoT and Edge Platforms (DEVIOT)

Developing Applications for Cisco Webex and Webex Devices (DEVWBX)

Performing CyberOps Using Core Security Technologies (CBRCOR)

Implementing Cisco Enterprise Network Core Technologies (ENCOR)

Implementing and Operating Cisco Service Provider Network Core Technologies (SPCOR)

Implementing and Operating Cisco Data Center Core Technologies (DCCOR)

Implementing and Operating Cisco Security Core Technologies

Implementing Cisco Collaboration Core Technologies (CLCOR)

Developing Applications using Cisco Core Platforms and APIs (DEVCOR)

CCDE Design Written

Deploying Cisco Unified Contact Center Express

Cisco Meraki Solutions Specialist

Securing Cisco Networks with Sourcefire FireAMP Endpoints

Designing Cisco Unified Contact Center Enterprise (UCCED)

Implementing and Supporting Cisco Unified Contact Center Enterprise (UCCEIS)

Cisco Collaboration SaaS Authorization Exam

Cisco Security Architecture for System Engineers

Adopting The Cisco Business Architecture Approach (DTBAA)

Cisco Customer Success Manager (CSM)

Mastering The Cisco Business Architecture Discipline (DTBAD)

Filters