Exam 4: Cisco Certified Network Associate (CCNA)

A wireless administrator has configured a WLAN; however, the clients need access to a less congested 5-GHz network for their voice quality. What action must be taken to meet the requirement?

(Multiple Choice)

4.8/5

(69)

Question 41

Refer to the exhibit. Router R1 Fa0/0 cannot ping router R3 Fa0/1. Which action must be taken in router R1 to help resolve the configuration issue?

(Multiple Choice)

4.8/5

(93)

Question 42

Which statement identifies the functionality of virtual machines?

(Multiple Choice)

4.7/5

(81)

Question 43

An engineer has been asked to upgrade the code on a WLC that is running Cisco AireOS 8.0. Which two protocols can be used to download the code file to the controller? (Choose two.)

(Multiple Choice)

4.9/5

(87)

Question 44

Refer to the exhibit. An engineer deploys a topology in which R1 obtains its IP configuration from DHCP. If the switch and DHCP server configurations are complete and correct. Which two sets of commands must be configured on R1 and R2 to complete the task? (Choose two)

(Multiple Choice)

4.8/5

(78)

Question 45

Refer to the exhibit. On R1 which routing protocol is in use on the route to 192.168.10.1?

(Multiple Choice)

4.8/5

(72)

Question 46

What is the authoritative source for an address lookup?

(Multiple Choice)

4.9/5

(76)

Question 47

Which keyword in a NAT configuration enables the use of one outside IP address for multiple inside hosts?

(Multiple Choice)

4.9/5

(62)

Question 48

Which MAC address is recognized as a VRRP virtual address?

(Multiple Choice)

4.9/5

(83)

Question 49

Refer to the exhibit. The show ip ospf interface command has been executed on R1. How is OSPF configured?

(Multiple Choice)

4.8/5

(66)

Question 50

Refer to the exhibit. What is the next hop address for traffic that is destined to host 10.0.1.5?

(Multiple Choice)

4.9/5

(66)

Question 51

The service password-encryption command is entered on a router. What is the effect of this configuration?

(Multiple Choice)

4.8/5

(67)

Question 52

Refer to the exhibit. The default-information originate command is configured under the R1 OSPF configuration. After testing, workstations on VLAN 20 at Site B cannot reach a DNS server on the Internet. Which action corrects the configuration issue?

(Multiple Choice)

4.9/5

(82)

Question 53

Refer to the exhibit. Shortly after SiteA was connected to SiteB over a new single-mode fiber path, users at SiteA report intermittent connectivity issues with applications hosted at SiteB. What is the cause of the intermittent connectivity issue?

(Multiple Choice)

4.9/5

(74)

Question 54

An engineer must configure traffic for a VLAN that is untagged by the switch as it crosses a trunk link. Which command should be used?

(Multiple Choice)

4.8/5

(87)

Question 55

Refer to the exhibit. Which command provides this output?

(Multiple Choice)

4.8/5

(90)

Question 56

Which value can you modify to configure a specific interface as the preferred forwarding interface?

(Multiple Choice)

4.8/5

(78)

Question 57

Refer to the exhibit. Which command would you use to configure a static route on Router1 to network 192.168.202.0/24 with a nondefault administrative distance?

(Multiple Choice)

4.9/5

(83)

Question 58

What is the benefit of configuring PortFast on an interface?

(Multiple Choice)

4.9/5

(73)

Question 59

What does an SDN controller use as a communication protocol to relay forwarding changes to a southbound API?

(Multiple Choice)

4.9/5

(76)

Question 60

Showing 41 - 60 of 411

Exam 4: Cisco Certified Network Associate (CCNA)

A wireless administrator has configured a WLAN; however, the clients need access to a less congested 5-GHz network for their voice quality. What action must be taken to meet the requirement?

Refer to the exhibit. Router R1 Fa0/0 cannot ping router R3 Fa0/1. Which action must be taken in router R1 to help resolve the configuration issue?

Which statement identifies the functionality of virtual machines?

An engineer has been asked to upgrade the code on a WLC that is running Cisco AireOS 8.0. Which two protocols can be used to download the code file to the controller? (Choose two.)

Refer to the exhibit. An engineer deploys a topology in which R1 obtains its IP configuration from DHCP. If the switch and DHCP server configurations are complete and correct. Which two sets of commands must be configured on R1 and R2 to complete the task? (Choose two)

Refer to the exhibit. On R1 which routing protocol is in use on the route to 192.168.10.1?

What is the authoritative source for an address lookup?

Which keyword in a NAT configuration enables the use of one outside IP address for multiple inside hosts?

Which MAC address is recognized as a VRRP virtual address?

Refer to the exhibit. The show ip ospf interface command has been executed on R1. How is OSPF configured?

Refer to the exhibit. What is the next hop address for traffic that is destined to host 10.0.1.5?

The service password-encryption command is entered on a router. What is the effect of this configuration?

Refer to the exhibit. The default-information originate command is configured under the R1 OSPF configuration. After testing, workstations on VLAN 20 at Site B cannot reach a DNS server on the Internet. Which action corrects the configuration issue?

Refer to the exhibit. Shortly after SiteA was connected to SiteB over a new single-mode fiber path, users at SiteA report intermittent connectivity issues with applications hosted at SiteB. What is the cause of the intermittent connectivity issue?

An engineer must configure traffic for a VLAN that is untagged by the switch as it crosses a trunk link. Which command should be used?

Refer to the exhibit. Which command provides this output?

Which value can you modify to configure a specific interface as the preferred forwarding interface?

Refer to the exhibit. Which command would you use to configure a static route on Router1 to network 192.168.202.0/24 with a nondefault administrative distance?

What is the benefit of configuring PortFast on an interface?

What does an SDN controller use as a communication protocol to relay forwarding changes to a southbound API?

Supporting Cisco Data Center System Devices (DCTECH)

Cisco Certified Technician Routing & Switching (RSTECH)

Understanding Cisco Cybersecurity Operations Fundamentals (CBROPS)

Managing Industrial Networks with Cisco Networking Technologies (IMINS)

DevNet Associate (DEVASC)

Conducting Forensic Analysis and Incident Response Using Cisco CyberOps Technologies (CBRFIR)

Implementing Cisco Enterprise Advanced Routing and Services (ENARSI)

Implementing Cisco SD-WAN Solutions (ENSDWI)

Designing Cisco Enterprise Networks (ENSLD)

Designing Cisco Enterprise Wireless Networks (300-425 ENWLSD)

Implementing Cisco Enterprise Wireless Networks (300-430 ENWLSI)

Automating Cisco Enterprise Solutions (ENAUTO)

Implementing Cisco Service Provider Advanced Routing Solutions (SPRI)

Implementing Cisco Service Provider VPN Services (SPVI)

Designing Cisco Data Center Infrastructure (DCID)

Troubleshooting Cisco Data Center Infrastructure (DCIT)

Implementing Cisco Application Centric Infrastructure (DCACI)

Configuring Cisco MDS 9000 Series Switches (DCSAN)

Implementing Cisco Application Centric Infrastructure - Advanced

Automating Cisco Data Center Solutions (DCAUTO)

Securing Networks with Cisco Firepower (300-710 SNCF)

Implementing and Configuring Cisco Identity Services Engine (300-715 SISE)

Securing Email with Cisco Email Security Appliance (300-720 SESA)

Securing the Web with Cisco Web Security Appliance (300-725 SWSA)

Implementing Secure Solutions with Virtual Private Networks (SVPN 300-730)

Automating Cisco Security Solutions (SAUTO)

Implementing Cisco Collaboration Applications (CLICA)

Implementing Cisco Advanced Call Control and Mobility Services (CLASSM)

Implementing Cisco Collaboration Cloud and Edge Solutions

Implementing Cisco Collaboration Conferencing

Automating Cisco Collaboration Solutions (CLAUTO)

Implementing DevOps Solutions and Practices using Cisco Platforms (DEVOPS)

Developing Solutions Using Cisco IoT and Edge Platforms (DEVIOT)

Developing Applications for Cisco Webex and Webex Devices (DEVWBX)

Performing CyberOps Using Core Security Technologies (CBRCOR)

Implementing Cisco Enterprise Network Core Technologies (ENCOR)

Implementing and Operating Cisco Service Provider Network Core Technologies (SPCOR)

Implementing and Operating Cisco Data Center Core Technologies (DCCOR)

Implementing and Operating Cisco Security Core Technologies

Implementing Cisco Collaboration Core Technologies (CLCOR)

Developing Applications using Cisco Core Platforms and APIs (DEVCOR)

CCDE Design Written

Deploying Cisco Unified Contact Center Express

Cisco Meraki Solutions Specialist

Securing Cisco Networks with Sourcefire FireAMP Endpoints

Designing Cisco Unified Contact Center Enterprise (UCCED)

Implementing and Supporting Cisco Unified Contact Center Enterprise (UCCEIS)

Cisco Collaboration SaaS Authorization Exam

Cisco Security Architecture for System Engineers

Adopting The Cisco Business Architecture Approach (DTBAA)

Cisco Customer Success Manager (CSM)

Mastering The Cisco Business Architecture Discipline (DTBAD)

Filters