Question 1

John is planning to implement a security policy that restricts the user from using the USB and FireWire ports on the computer. Which of the following is a justification to this policy?

Accepted Answer

A) USB and FireWire devices are easy to hack into. 
B) USB and FireWire devices have no built-in security features. 
C) USB and FireWire devices are slower. 
D) USB and FireWire devices are hot swappable. 
A) USB and FireWire devices are easy to hack into. 
B) USB and FireWire devices have no built-in security features. 
C) USB and FireWire devices are slower. 
D) USB and FireWire devices are hot swappable. B

Question 2

What is the minimum number of drives necessary to operate a RAID 5 array?

Accepted Answer

A) 1 
B) 3 
C) 4 
D) 2 
A) 1 
B) 3 
C) 4 
D) 2 B

Question 3

Which of the following built-in Windows operating system utilities is used to recover the operating system during a crash?

Accepted Answer

A) Emergency Repair Disk 
B) Automated System Recovery 
C) Windows backup utility 
D) Disk Defragmenter 
A) Emergency Repair Disk 
B) Automated System Recovery 
C) Windows backup utility 
D) Disk Defragmenter B

Question 4

Janet has been using her computer for over a year now. Currently, she is facing a problem with an incorrect date and time set on her computer. She has tried to rectify it several times, but is not able to fix it. Which of the following could fix her problem?

Accepted Answer

A) Replacing the CMOS battery 
B) Replacing the motherboard 
C) Replacing the video card 
D) Re-installing the operating system 
A) Replacing the CMOS battery 
B) Replacing the motherboard 
C) Replacing the video card 
D) Re-installing the operating system

Question 5

You have a RAID array configured on one of your servers. In the event of a single-drive failure of an array, which of the following is the first step to recover the server?

Accepted Answer

A) Restore from backup 
B) Replace the failed drive 
C) Determine RAID type and level 
D) Remove the failed drive 
A) Restore from backup 
B) Replace the failed drive 
C) Determine RAID type and level 
D) Remove the failed drive

Question 6

Which of the following specifies the maximum number of devices that can be configured using the Fiber Channel technology?

Accepted Answer

A) 30 
B) 100 
C) 126 
D) 256 
A) 30 
B) 100 
C) 126 
D) 256

Question 7

What is the total bandwidth for a PCI slot that incorporates a 64-bit PCI bus operating at a clock speed of 66MHz?

Accepted Answer

A) 256 MBps 
B) 512 MBps 
C) 528 MBps 
D) 700 MBps 
A) 256 MBps 
B) 512 MBps 
C) 528 MBps 
D) 700 MBps

Question 8

John needs to connect eight servers to a disk drive array with 250 HDDs. Which of the following should he use?

Accepted Answer

A) Ultra ATA-3 
B) Fiber Channel 
C) IEEE 1394 
D) USB 
A) Ultra ATA-3 
B) Fiber Channel 
C) IEEE 1394 
D) USB

Question 9

You are planning to add a new hard drive on your IDE-based RAID system. Which of the following steps need not be followed when adding a new hard drive on an IDE-based RAID system?

Accepted Answer

A) You need to ensure that the new drive is proper terminated. 
B) You have flexibility to use any type of cabling. 
C) You need to configure the new hard drive as a master or a slave drive. 
D) You need to configure the jumper setting on the new drive properly. 
A) You need to ensure that the new drive is proper terminated. 
B) You have flexibility to use any type of cabling. 
C) You need to configure the new hard drive as a master or a slave drive. 
D) You need to configure the jumper setting on the new drive properly.

Question 10

You are a network administrator on your network. A single Ethernet 10/100 Mbps switch on this network is handling all data transfers on a server network configured with 10/100 NIC cards. Many users are complaining about slow connections. Which of the following should be done to improve network performance?

Accepted Answer

A) Upgrade the switch to a 1 Gbps switch. 
B) Reduce the number of PCs using this network connection. 
C) Install more switches on the network. 
D) Install a load balancer on the network. 
A) Upgrade the switch to a 1 Gbps switch. 
B) Reduce the number of PCs using this network connection. 
C) Install more switches on the network. 
D) Install a load balancer on the network.

Question 11

How many devices does an Ultra2 SCSI system support?

Accepted Answer

A) 20 
B) 8 
C) 14 
D) 10 
A) 20 
B) 8 
C) 14 
D) 10

Question 12

Which of the following is NOT a function performed by a proxy server?

Accepted Answer

A) NAT 
B) Data encryption 
C) Web page caching 
D) Packet filtering 
A) NAT 
B) Data encryption 
C) Web page caching 
D) Packet filtering

Question 13

David wants to check the maximum transfer rate of his network. Which of the following counters should he use from the network interface bottleneck monitoring tool?

Accepted Answer

A) Packets Outbound Discarded 
B) Output Queue Length 
C) Bytes Total/sec 
D) Current Bandwidth 
A) Packets Outbound Discarded 
B) Output Queue Length 
C) Bytes Total/sec 
D) Current Bandwidth

Question 14

Which of the following allows for the removal and insertion of PCI devices without powering down the computer?

Accepted Answer

A) PCI bus mastering 
B) DMA mode 
C) Overclocking 
D) Hot Plug PCI 
A) PCI bus mastering 
B) DMA mode 
C) Overclocking 
D) Hot Plug PCI

Question 15

Which of the following SCSI interfaces has a maximum data transmission speed of 20 MBps?

Accepted Answer

A) Wide SCSI 
B) Ultra Wide SCSI 
C) Wide Ultra-2 SCSI 
D) Wide Fast SCSI 
A) Wide SCSI 
B) Ultra Wide SCSI 
C) Wide Ultra-2 SCSI 
D) Wide Fast SCSI

Question 16

Which of the following can safely be used to clean dust that has accumulated from inside a server case?

Accepted Answer

A) Isopropyl Alcohol 
B) Water 
C) Hydrochloric Acid 
D) Compressed air 
A) Isopropyl Alcohol 
B) Water 
C) Hydrochloric Acid 
D) Compressed air

Question 17

Which of the following components are not integrated on a motherboard?

Accepted Answer

A) Network card 
B) Video 
C) Audio 
D) Power supply 
A) Network card 
B) Video 
C) Audio 
D) Power supply

Question 18

Which of the following TCP/IP tool returns specifies the details of each path-hop over the network to a specific destination?

Accepted Answer

A) PING 
B) TRACERT 
C) NETSTAT 
D) IPCONFIG 
A) PING 
B) TRACERT 
C) NETSTAT 
D) IPCONFIG

Question 19

John wants to store the maximum possible data using a 24 GB DAT drive. Which of the following backup format should he use?

Accepted Answer

A) DDS-1 
B) DDS-3 
C) DDS-2 
D) DDS-0 
A) DDS-1 
B) DDS-3 
C) DDS-2 
D) DDS-0

Question 20

Which of the following symbols would indicate a problematic device in the Device Manager?

Accepted Answer

A) A red "x"" 
B) A black exclamation on a yellow triangle 
C) A green question mark 
D) A blue """ on a white field 
A) A red "x"" 
B) A black exclamation on a yellow triangle 
C) A green question mark 
D) A blue """ on a white field

Exam 26: Server

John is planning to implement a security policy that restricts the user from using the USB and FireWire ports on the computer. Which of the following is a justification to this policy?

What is the minimum number of drives necessary to operate a RAID 5 array?

Which of the following built-in Windows operating system utilities is used to recover the operating system during a crash?

Janet has been using her computer for over a year now. Currently, she is facing a problem with an incorrect date and time set on her computer. She has tried to rectify it several times, but is not able to fix it. Which of the following could fix her problem?

You have a RAID array configured on one of your servers. In the event of a single-drive failure of an array, which of the following is the first step to recover the server?

Which of the following specifies the maximum number of devices that can be configured using the Fiber Channel technology?

What is the total bandwidth for a PCI slot that incorporates a 64-bit PCI bus operating at a clock speed of 66MHz?

John needs to connect eight servers to a disk drive array with 250 HDDs. Which of the following should he use?

You are planning to add a new hard drive on your IDE-based RAID system. Which of the following steps need not be followed when adding a new hard drive on an IDE-based RAID system?

How many devices does an Ultra2 SCSI system support?

Which of the following is NOT a function performed by a proxy server?

David wants to check the maximum transfer rate of his network. Which of the following counters should he use from the network interface bottleneck monitoring tool?

Which of the following allows for the removal and insertion of PCI devices without powering down the computer?

Which of the following SCSI interfaces has a maximum data transmission speed of 20 MBps?

Which of the following can safely be used to clean dust that has accumulated from inside a server case?

Which of the following components are not integrated on a motherboard?

Which of the following TCP/IP tool returns specifies the details of each path-hop over the network to a specific destination?

John wants to store the maximum possible data using a 24 GB DAT drive. Which of the following backup format should he use?

Which of the following symbols would indicate a problematic device in the Device Manager?

Hardware

Laptops

Networking

Printers

Procedures

Other Operating Systems and Technologies

Mobile-Devices

Operating-Systems

Security

Troubleshooting

Access-Identity

Apps - Data - Host

Compliance-Op

Comptia Asp

Concepts

Cryptography

Dhti

Enrolled-Agent

Essentials

Install Configure

Linux

Management

Media Topologies

Network

Other-Operating-Systems-And-Technologies

Software-Troubleshooting

Threats

Filters