Question 1

<Huawei> system-view [Huawei]command-privilege level 3 view user save Refer to the command output. What is the result of the shown command?

Accepted Answer

A)  The command adjusts the save command of a user to privilege level 3. 
B)  The command adjusts the save command in the user view to privilege level 3. 
C)  The command adjusts the user view command privilege level to 3, and saves the configuration. 
D)  The command adjusts the privilege level of a user to 3, and saves the configuration. 
A)  The command adjusts the save command of a user to privilege level 3. 
B)  The command adjusts the save command in the user view to privilege level 3. 
C)  The command adjusts the user view command privilege level to 3, and saves the configuration. 
D)  The command adjusts the privilege level of a user to 3, and saves the configuration.

Question 2

Which of the following is the feature of port-based VLAN assignment?

Accepted Answer

A)  VLAN IDs are allocated based on the protocol type and encapsulation format of data frames. 
B)  The VLAN does not need to be configured again when hosts move. 
C)  The VLAN tag is added to data frames based on the IP address carried in the frames. 
D)  The VLAN needs to be configured again when hosts move. 
A)  VLAN IDs are allocated based on the protocol type and encapsulation format of data frames. 
B)  The VLAN does not need to be configured again when hosts move. 
C)  The VLAN tag is added to data frames based on the IP address carried in the frames. 
D)  The VLAN needs to be configured again when hosts move.

Question 3

How is mapping performed on a DTE device in a Frame Relay network?

Accepted Answer

A)  The local DLCI number is mapped to a remote IP address. 
B)  The local IP address is mapped to a remote DLCI number. 
C)  The local DLCI number is mapped to a local IP address. 
D)  The remote DLCI number is mapped to a remote IP address. 
A)  The local DLCI number is mapped to a remote IP address. 
B)  The local IP address is mapped to a remote DLCI number. 
C)  The local DLCI number is mapped to a local IP address. 
D)  The remote DLCI number is mapped to a remote IP address.

Question 4

When using VRP, which of the following commands is used to configure the data link layer encapsulation type of a serial interface as HDLC?

Accepted Answer

A)  encapsulation hdlc 
B)  link-protocol hdlc 
C)  hdlc enable 
D)  link-protocol ppp 
A)  encapsulation hdlc 
B)  link-protocol hdlc 
C)  hdlc enable 
D)  link-protocol ppp

Question 5

On the VRP platform, which of the following commands is used to configure the Router ID of a router as 1.1.1.1?

Accepted Answer

A) router id 1.1.1.1 B) [Huawei]router id 1.1.1.1 C) [Huawei]router-id 1.1.1.1 D) [Huawei]router id 1.1.1.1 255.255.255.255 A) router id 1.1.1.1 B) [Huawei]router id 1.1.1.1 C) [Huawei]router-id 1.1.1.1 D) [Huawei]router id 1.1.1.1 255.255.255.255

Question 6

A DHCP server has been established in the enterprise network. After the client has obtained an IP address from the DHCP server, the user decided to modify the IP address manually. In what way may this affect the enterprise network? (Choose two).

Accepted Answer

A)  The client may experience an IP address conflict. 
B)  The client may access the network normally. 
C)  The client's interface connection will shutdown. 
D)  The client will associate with another DHCP server. 
A)  The client may experience an IP address conflict. 
B)  The client may access the network normally. 
C)  The client's interface connection will shutdown. 
D)  The client will associate with another DHCP server.

Question 7

Refer to the graphic.   VLANs 10 and 20 have been created on both SWA and SWC. VLAN 10 has been manually created on SWB. SWB has learned VLAN 20 from SWA via GVRP, allowing the hosts to belong to different VLANs as shown. If port Interface G0/0/1 on SWB is changed to fixed mode, what will happen?

Accepted Answer

A)  Host A will still be able to communicate with Host C 
B)  Host B will still be able to communicate with Host D 
C)  Hosts that belong to the same VLAN will still be able to communicate. 
D)  All hosts will be unable to communicate with any other host. 
A)  Host A will still be able to communicate with Host C 
B)  Host B will still be able to communicate with Host D 
C)  Hosts that belong to the same VLAN will still be able to communicate. 
D)  All hosts will be unable to communicate with any other host.

Question 8

Two routers have established a point-to-point network using PPP. The administrator has configured the routers to run OSPF in the same area with the same router ID, what will behavior will occur as a result of the configuration?

Accepted Answer

A)  The routers will build a neighbor relationship even though both routers are using the same router ID. 
B)  VRP will notify of a router ID conflict between the two routers. 
C)  The routers will build an adjacency even though both routers are using the same router ID. 
D)  The routers will not send hello packets to each other because they are using the same router ID. 
A)  The routers will build a neighbor relationship even though both routers are using the same router ID. 
B)  VRP will notify of a router ID conflict between the two routers. 
C)  The routers will build an adjacency even though both routers are using the same router ID. 
D)  The routers will not send hello packets to each other because they are using the same router ID.

Question 9

Which of the following port status may exist on an STP-enabled switch?

Accepted Answer

A)  Forwarding 
B)  Listening 
C)  Discarding 
D)  Disabled 
A)  Forwarding 
B)  Listening 
C)  Discarding 
D)  Disabled

Question 10

Refer to the graphic. Host A and Host B use VLAN routing to facilitate communication. What must be configured on interface G0/0/1.1 of RTA to achieve this?

Accepted Answer

A)  dot1q termination vid 1. 
B)  dot1q termination vid 10. 
C)  dot1q termination vid 20. 
D)  dot1q termination vid 30. 
A)  dot1q termination vid 1. 
B)  dot1q termination vid 10. 
C)  dot1q termination vid 20. 
D)  dot1q termination vid 30.

Question 11

Which SNMP version focuses on two main aspects, namely security and administration. The security aspect is addressed by offering both strong authentication and data encryption for privacy. The administration aspect is focused on two parts, namely notification originators and proxy forwarders.

Accepted Answer

A)  SNMPv1 
B)  SNMPv2 
C)  SNMPv2c 
D)  SNMPv3 
A)  SNMPv1 
B)  SNMPv2 
C)  SNMPv2c 
D)  SNMPv3

Question 12

Which of the following statements is true?

Accepted Answer

A)  Switches work at the physical layer. 
B)  Switches work at the network layer. 
C)  Routers work at the network layer. 
D)  Routers work at the physical layer. 
A)  Switches work at the physical layer. 
B)  Switches work at the network layer. 
C)  Routers work at the network layer. 
D)  Routers work at the physical layer.

Question 13

Which of the following statements is false about OSPF area partition?

Accepted Answer

A)  The link state databases (LSDBs) of routers are the same in the same OSPF area. 
B)  OSPF area partition can reduce the LSDB size of the router. 
C)  Area 0 is the backbone area, and other areas must be connected to this area. 
D)  Only area border routers (ABRs) can function as the autonomous system boundary routers (ASBRs). 
A)  The link state databases (LSDBs) of routers are the same in the same OSPF area. 
B)  OSPF area partition can reduce the LSDB size of the router. 
C)  Area 0 is the backbone area, and other areas must be connected to this area. 
D)  Only area border routers (ABRs) can function as the autonomous system boundary routers (ASBRs).

Question 14

MCU front panel FE port is ( )

Accepted Answer

A)  maintenance network port 
B)  Business network port 
C)  backup network port 
D)  master network port 
A)  maintenance network port 
B)  Business network port 
C)  backup network port 
D)  master network port

Question 15

<Huawei>system-view [Huawei]history-command max-size 20 Refer to the command output. Which statements regarding the shown command are true? (Choose two)

Accepted Answer

A)  The command is used to adjust the size of the history command buffer. 
B)  The default value of the history command buffer is 5. 
C)  The command should be configured in the user-interface view. 
D)  Once configured, commands totaling up to 20 bytes can be saved in the buffer. 
A)  The command is used to adjust the size of the history command buffer. 
B)  The default value of the history command buffer is 5. 
C)  The command should be configured in the user-interface view. 
D)  Once configured, commands totaling up to 20 bytes can be saved in the buffer.

Question 16

Which of the following protocols is used in Frame Relay to map the address to DLCI dynamically?

Accepted Answer

A)  ARP protocol 
B)  RARP protocol 
C)  InARP protocol 
D)  Map protocol 
A)  ARP protocol 
B)  RARP protocol 
C)  InARP protocol 
D)  Map protocol

Question 17

User access layer is composed of various types ( ).

Accepted Answer

A)  MCU 
B)  GK 
C)  GW 
D)  Terminal 
A)  MCU 
B)  GK 
C)  GW 
D)  Terminal

Question 18

Which of the following parameters is not contained in STP configuration BPDUs?

Accepted Answer

A)  Root ID 
B)  VLAN ID 
C)  Bridge ID 
D)  Port ID 
A)  Root ID 
B)  VLAN ID 
C)  Bridge ID 
D)  Port ID

Question 19

Which of the following statements about static route preference on Huawei devices is false?

Accepted Answer

A)  Static route preference ranges from 0 to 255. 
B)  Default static route preference is 60. 
C)  Static route preference is either internal or external. Administrators can modify external preferences. 
D)  If static route preference is 255, the route cannot be used. 
A)  Static route preference ranges from 0 to 255. 
B)  Default static route preference is 60. 
C)  Static route preference is either internal or external. Administrators can modify external preferences. 
D)  If static route preference is 255, the route cannot be used.

Question 20

Refer to the graphic, 00e0-fc99-9999 is a specific host MAC address learned by a switch through ARP and the host changes the IP address three times.

Accepted Answer

A) True 
 B)False

<Huawei> system-view [Huawei]command-privilege level 3 view user save Refer to the command output. What is the result of the shown command?

Which of the following is the feature of port-based VLAN assignment?

How is mapping performed on a DTE device in a Frame Relay network?

When using VRP, which of the following commands is used to configure the data link layer encapsulation type of a serial interface as HDLC?

On the VRP platform, which of the following commands is used to configure the Router ID of a router as 1.1.1.1?

A DHCP server has been established in the enterprise network. After the client has obtained an IP address from the DHCP server, the user decided to modify the IP address manually. In what way may this affect the enterprise network? (Choose two).

Refer to the graphic. VLANs 10 and 20 have been created on both SWA and SWC. VLAN 10 has been manually created on SWB. SWB has learned VLAN 20 from SWA via GVRP, allowing the hosts to belong to different VLANs as shown. If port Interface G0/0/1 on SWB is changed to fixed mode, what will happen?

Two routers have established a point-to-point network using PPP. The administrator has configured the routers to run OSPF in the same area with the same router ID, what will behavior will occur as a result of the configuration?

Which of the following port status may exist on an STP-enabled switch?

Refer to the graphic. Host A and Host B use VLAN routing to facilitate communication. What must be configured on interface G0/0/1.1 of RTA to achieve this?

Which SNMP version focuses on two main aspects, namely security and administration. The security aspect is addressed by offering both strong authentication and data encryption for privacy. The administration aspect is focused on two parts, namely notification originators and proxy forwarders.

Which of the following statements is true?

Which of the following statements is false about OSPF area partition?

MCU front panel FE port is ( )

<Huawei>system-view [Huawei]history-command max-size 20 Refer to the command output. Which statements regarding the shown command are true? (Choose two)

Which of the following protocols is used in Frame Relay to map the address to DLCI dynamically?

User access layer is composed of various types ( ).

Which of the following parameters is not contained in STP configuration BPDUs?

Which of the following statements about static route preference on Huawei devices is false?

Refer to the graphic, 00e0-fc99-9999 is a specific host MAC address learned by a switch through ARP and the host changes the IP address three times.

HCNA-VC (Huawei Certified Network Associate - Video Conference)

HCNP-R&S-IERN (Huawei Certified Network Professional-Implementing Enterprise Routing Network)

HCNP-R&S-IENPÂ (Huawei Certified Network Professional-Improving Enterprise Network Performance)

HCNP-R&S Fast Track (Huawei Certified Network Professional - Routing & Switching Fast Track)

HCIE-R&S (Written) (Huawei Certified Internetwork Expert-Routing & Switching)

HCNA-Security-CBSN (Huawei Certified Network Associate - Constructing Basic Security Network)

HCNA-Storage-BSSN (Huawei Certified Network Associate - Building the Structure of Storage Network)

HCNA-Storage-BSSN

Huawei Certified Network Professional- Constructing Big Data Solution

HCIE-Storage

HCIA-Cloud Service V2.2

Huawei Certified Pre-sales Associate-IP Network(Datacom)-ENU

Huawei Certified Pre-sales Associate - ECC (HCPA-ECC)

HCNA - Carrier IP

HCIP-Cloud Computing-CDSM

HCIA-SDN

Filters

Exam 2: HHCIA Routing&Switching

<Huawei> system-view [Huawei]command-privilege level 3 view user save Refer to the command output. What is the result of the shown command?

Which of the following is the feature of port-based VLAN assignment?

How is mapping performed on a DTE device in a Frame Relay network?

When using VRP, which of the following commands is used to configure the data link layer encapsulation type of a serial interface as HDLC?

On the VRP platform, which of the following commands is used to configure the Router ID of a router as 1.1.1.1?

A DHCP server has been established in the enterprise network. After the client has obtained an IP address from the DHCP server, the user decided to modify the IP address manually. In what way may this affect the enterprise network? (Choose two).

Refer to the graphic. VLANs 10 and 20 have been created on both SWA and SWC. VLAN 10 has been manually created on SWB. SWB has learned VLAN 20 from SWA via GVRP, allowing the hosts to belong to different VLANs as shown. If port Interface G0/0/1 on SWB is changed to fixed mode, what will happen?

Two routers have established a point-to-point network using PPP. The administrator has configured the routers to run OSPF in the same area with the same router ID, what will behavior will occur as a result of the configuration?

Which of the following port status may exist on an STP-enabled switch?

Refer to the graphic. Host A and Host B use VLAN routing to facilitate communication. What must be configured on interface G0/0/1.1 of RTA to achieve this?

Which SNMP version focuses on two main aspects, namely security and administration. The security aspect is addressed by offering both strong authentication and data encryption for privacy. The administration aspect is focused on two parts, namely notification originators and proxy forwarders.

Which of the following statements is true?

Which of the following statements is false about OSPF area partition?

MCU front panel FE port is ( )

<Huawei>system-view [Huawei]history-command max-size 20 Refer to the command output. Which statements regarding the shown command are true? (Choose two)

Which of the following protocols is used in Frame Relay to map the address to DLCI dynamically?

User access layer is composed of various types ( ).

Which of the following parameters is not contained in STP configuration BPDUs?

Which of the following statements about static route preference on Huawei devices is false?

Refer to the graphic, 00e0-fc99-9999 is a specific host MAC address learned by a switch through ARP and the host changes the IP address three times.

HCNA-VC (Huawei Certified Network Associate - Video Conference)

HCNP-R&S-IERN (Huawei Certified Network Professional-Implementing Enterprise Routing Network)

HCNP-R&S-IENPÂ (Huawei Certified Network Professional-Improving Enterprise Network Performance)

HCNP-R&S Fast Track (Huawei Certified Network Professional - Routing & Switching Fast Track)

HCIE-R&S (Written) (Huawei Certified Internetwork Expert-Routing & Switching)

HCNA-Security-CBSN (Huawei Certified Network Associate - Constructing Basic Security Network)

HCNA-Storage-BSSN (Huawei Certified Network Associate - Building the Structure of Storage Network)

HCNA-Storage-BSSN

Huawei Certified Network Professional- Constructing Big Data Solution

HCIE-Storage

HCIA-Cloud Service V2.2

Huawei Certified Pre-sales Associate-IP Network(Datacom)-ENU

Huawei Certified Pre-sales Associate - ECC (HCPA-ECC)

HCNA - Carrier IP

HCIP-Cloud Computing-CDSM

HCIA-SDN

Filters