Question 1

The network administrator needs to configure static NAT on RTA, in order to allow Host A to communicate with Host C.   Which command is correct?

Accepted Answer

A)  [RTA-Serial1/0/1]nat outbound 200.1.1.10 
B)  [RTA-Serial1/0/1]nat static global 200.1.1.10 inside 192.168.1.0 
C)  [RTA-Serial1/0/1]nat static global 192.168.1.1 inside 200.1.1.10 
D)  [RTA-Serial1/0/1]nat static global 200.1.1.10 inside 192.168.1.1 
A)  [RTA-Serial1/0/1]nat outbound 200.1.1.10 
B)  [RTA-Serial1/0/1]nat static global 200.1.1.10 inside 192.168.1.0 
C)  [RTA-Serial1/0/1]nat static global 192.168.1.1 inside 200.1.1.10 
D)  [RTA-Serial1/0/1]nat static global 200.1.1.10 inside 192.168.1.1

Question 2

Which of the following interfaces can transmit video and audio signals?

Accepted Answer

A)  DVI 
B)  HDMI 
C)  VGA 
D)  S-video 
A)  DVI 
B)  HDMI 
C)  VGA 
D)  S-video

Question 3

An administrator of a company supporting a large enterprise network wishes to implement OSPF on the network as opposed to RIP. Which of the following points should the administrator use to support his reasoning for this change? (Choose three)

Accepted Answer

A)  OSPF has no hop count limitation. 
B)  OSPF has a lower routing update overhead. 
C)  OSPF has a simpler configuration. 
D)  OSPF supports faster convergence. 
A)  OSPF has no hop count limitation. 
B)  OSPF has a lower routing update overhead. 
C)  OSPF has a simpler configuration. 
D)  OSPF supports faster convergence.

Question 4

Which of the following commands can be used to view the current configurations on a Huawei router?

Accepted Answer

A)  display current-configuration 
B)  display saved-configuration 
C)  view saved-configuration 
D)  show startup-configuration 
A)  display current-configuration 
B)  display saved-configuration 
C)  view saved-configuration 
D)  show startup-configuration

Question 5

The following shows the command output on a router. Which of the following statements are true? display startup MainBoard: Startup system software: flash:/AR2220E-V200R007C00SPC600.cc Next startup system software: flash:/AR2220E-V200R007C00SPC600.cc Backup system software for next startup: null Startup saved-configuration file: flash:/vrpcfg.zip Next startup saved-configuration file: flash:/backup.zip Startup license file: null Next startup license file: null Startup patch package: null Next startup patch package: null Startup voice-files: null Next startup voice-files: null

Accepted Answer

A)  The current VRP version file is the same as the VRP file for next startup. 
B)  The current VRP version file is different from the VRP file for next startup. 
C)  The current configuration file is the same as the configuration file for next startup. 
D)  The current configuration file is different from the configuration file for next startup. 
A)  The current VRP version file is the same as the VRP file for next startup. 
B)  The current VRP version file is different from the VRP file for next startup. 
C)  The current configuration file is the same as the configuration file for next startup. 
D)  The current configuration file is different from the configuration file for next startup.

Question 6

On Huawei VRP platform, which of the following can be used to invoke the history command saved by the command line interface? (Choose two)

Accepted Answer

A)  Up cursor key  
B)  Left cursor key  
C)  Ctrl+P 
D)  Ctrl+U 
A)  Up cursor key  
B)  Left cursor key  
C)  Ctrl+P 
D)  Ctrl+U

Question 7

A user can view the information for the RIP protocol on a router. What does "Age time" in the returned result of the command mean?

Accepted Answer

A)  The interval of updating an RIP packet 
B)  The aging time of an RIP route 
C)  The suppression time of an RIP route 
D)  The time spent on switching between RIP routes 
A)  The interval of updating an RIP packet 
B)  The aging time of an RIP route 
C)  The suppression time of an RIP route 
D)  The time spent on switching between RIP routes

Question 8

After a command for displaying RIP route information is entered on a router, peer 192.168.1.2 on Serial1/0/0 is displayed in the returned result. What does 192.168.1.2 stand for?

Accepted Answer

A)  Address of a RIP neighbor 
B)  Address of the port with the RIP protocol enabled 
C)  Next hop address of the RIP route 
D)  Transmission address of the RIP protocol 
A)  Address of a RIP neighbor 
B)  Address of the port with the RIP protocol enabled 
C)  Next hop address of the RIP route 
D)  Transmission address of the RIP protocol

Question 9

As shown in the figure, which of the following ports will become the designated port?

Accepted Answer

A)  G0/0/3 of SWB 
B)  G0/0/1 of SWC 
C)  G0/0/2 of SWC 
D)  G0/0/1 of SWB 
A)  G0/0/3 of SWB 
B)  G0/0/1 of SWC 
C)  G0/0/2 of SWC 
D)  G0/0/1 of SWB

Question 10

Which of the following commands is used to enable dynamic address mapping protocol in the interface encapsulated with Frame Relay?

Accepted Answer

A)  fr inarp 
B)  fr reverse-arp 
C)  inverse-arp 
D)  reverse-arp 
A)  fr inarp 
B)  fr reverse-arp 
C)  inverse-arp 
D)  reverse-arp

Question 11

When two MCU cascade, scheduling a meeting, besides, superior and subordinate MCU as a virtual venue respectively join the conference.

Accepted Answer

A) True 
 B)False

Question 12

An AR2200 router in the company network cannot boot. In order to resolve this, the administrator wishes to update the VRP software. What should he/she do?

Accepted Answer

A)  The administrator should use a console cable to connect the router and host, and directly upgrade the device. 
B)  The administrator should use FTP to transfer the VRP software, by configuring the AR2200 router as an FTP client. 
C)  The administrator should use DHCP to boot the AR2200, and then use the AR2200 router as a TFTP client to download the VRP software from the server. 
D)  The administrator should use the telnet command on the client to remote access the device, and upgrade the VRP software. 
A)  The administrator should use a console cable to connect the router and host, and directly upgrade the device. 
B)  The administrator should use FTP to transfer the VRP software, by configuring the AR2200 router as an FTP client. 
C)  The administrator should use DHCP to boot the AR2200, and then use the AR2200 router as a TFTP client to download the VRP software from the server. 
D)  The administrator should use the telnet command on the client to remote access the device, and upgrade the VRP software.

Question 13

Which of the following entries is not included in the routing table?

Accepted Answer

A)  source address 
B)  next hop 
C)  destination address 
D)  cost 
A)  source address 
B)  next hop 
C)  destination address 
D)  cost

Question 14

Refer to the configuration output. Which of the following statements regarding ACL 2001 is correct?

Accepted Answer

A)  Packets from network 10.0.1.0/24 network will be denied. 
B)  Packets from network 10.0.1.0/24 network will be permitted. 
C)  Packets destined for network 10.0.1.0/24 will be denied. 
D)  Packets destined for network 10.0.1.0/24 will be permitted. 
A)  Packets from network 10.0.1.0/24 network will be denied. 
B)  Packets from network 10.0.1.0/24 network will be permitted. 
C)  Packets destined for network 10.0.1.0/24 will be denied. 
D)  Packets destined for network 10.0.1.0/24 will be permitted.

Question 15

Which of the following WLAN standards support operation in the 5GHz range? (Choose all that apply)

Accepted Answer

A)  802.11a 
B)  802.11b 
C)  802.11g 
D)  802.11n 
A)  802.11a 
B)  802.11b 
C)  802.11g 
D)  802.11n

Question 16

Refer to the graphic. GE0/0/1 and GE0/0/2 on the switch are configured as hybrid interfaces. Which of the following statements are true? (Choose all that apply)

Accepted Answer

A)  The administrative department and the finance department cannot communicate with each other because the VLANs of the two departments are different. 
B)  The data frames sent by the administrative department carry tagged VLAN 20 on the switch. 
C)  On the switch, the data frames sent by the finance department carry tagged VLAN 20. 
D)  The switch can be a Layer 2 or Layer 3 switch because communications do not need to be transmitted through a Layer 3 gateway. 
E)  If GE0/0/1 and GE0/0/2 on the switch are changed to trunk ports, the administrative department and finance department can communicate with each other. 
A)  The administrative department and the finance department cannot communicate with each other because the VLANs of the two departments are different. 
B)  The data frames sent by the administrative department carry tagged VLAN 20 on the switch. 
C)  On the switch, the data frames sent by the finance department carry tagged VLAN 20. 
D)  The switch can be a Layer 2 or Layer 3 switch because communications do not need to be transmitted through a Layer 3 gateway. 
E)  If GE0/0/1 and GE0/0/2 on the switch are changed to trunk ports, the administrative department and finance department can communicate with each other.

Question 17

Which of the following statements about the "ip route-static 10.0.2.2 255.255.255.255 10.0.12.2 preference 20" command is true?

Accepted Answer

A)  The next-hop IP address of the route is 10.0.12.2 
B)  The route can guide forwarding of the data packets with the destination IP address 10.0.2.2. 
C)  The preference of the route is 20. 
D)  The route can guide forwarding of the data packets with the destination IP address 10.0.12.2. 
A)  The next-hop IP address of the route is 10.0.12.2 
B)  The route can guide forwarding of the data packets with the destination IP address 10.0.2.2. 
C)  The preference of the route is 20. 
D)  The route can guide forwarding of the data packets with the destination IP address 10.0.12.2.

Question 18

Which of the following packets are OSPF packets?

Accepted Answer

A)  HELLO 
B)  LSU 
C)  LSR 
D)  LSA 
A)  HELLO 
B)  LSU 
C)  LSR 
D)  LSA

Question 19

If AH and ESP are both required to protect data streams between IPsec peers, how many Security Associations (SA) are required in total?

Accepted Answer

A)  1 
B)  2 
C)  3 
D)  4 
A)  1 
B)  2 
C)  3 
D)  4

Question 20

According to OSI reference model, which layer is responsible for end to end error checking and flow control?

Accepted Answer

A)  Physical layer 
B)  Data link layer 
C)  Network layer 
D)  Transport layer 
A)  Physical layer 
B)  Data link layer 
C)  Network layer 
D)  Transport layer

The network administrator needs to configure static NAT on RTA, in order to allow Host A to communicate with Host C. Which command is correct?

Which of the following interfaces can transmit video and audio signals?

An administrator of a company supporting a large enterprise network wishes to implement OSPF on the network as opposed to RIP. Which of the following points should the administrator use to support his reasoning for this change? (Choose three)

Which of the following commands can be used to view the current configurations on a Huawei router?

On Huawei VRP platform, which of the following can be used to invoke the history command saved by the command line interface? (Choose two)

A user can view the information for the RIP protocol on a router. What does "Age time" in the returned result of the command mean?

After a command for displaying RIP route information is entered on a router, peer 192.168.1.2 on Serial1/0/0 is displayed in the returned result. What does 192.168.1.2 stand for?

As shown in the figure, which of the following ports will become the designated port?

Which of the following commands is used to enable dynamic address mapping protocol in the interface encapsulated with Frame Relay?

When two MCU cascade, scheduling a meeting, besides, superior and subordinate MCU as a virtual venue respectively join the conference.

An AR2200 router in the company network cannot boot. In order to resolve this, the administrator wishes to update the VRP software. What should he/she do?

Which of the following entries is not included in the routing table?

Refer to the configuration output. Which of the following statements regarding ACL 2001 is correct?

Which of the following WLAN standards support operation in the 5GHz range? (Choose all that apply)

Refer to the graphic. GE0/0/1 and GE0/0/2 on the switch are configured as hybrid interfaces. Which of the following statements are true? (Choose all that apply)

Which of the following statements about the "ip route-static 10.0.2.2 255.255.255.255 10.0.12.2 preference 20" command is true?

Which of the following packets are OSPF packets?

If AH and ESP are both required to protect data streams between IPsec peers, how many Security Associations (SA) are required in total?

According to OSI reference model, which layer is responsible for end to end error checking and flow control?

HCNA-VC (Huawei Certified Network Associate - Video Conference)

HCNP-R&S-IERN (Huawei Certified Network Professional-Implementing Enterprise Routing Network)

HCNP-R&S-IENPÂ (Huawei Certified Network Professional-Improving Enterprise Network Performance)

HCNP-R&S Fast Track (Huawei Certified Network Professional - Routing & Switching Fast Track)

HCIE-R&S (Written) (Huawei Certified Internetwork Expert-Routing & Switching)

HCNA-Security-CBSN (Huawei Certified Network Associate - Constructing Basic Security Network)

HCNA-Storage-BSSN (Huawei Certified Network Associate - Building the Structure of Storage Network)

HCNA-Storage-BSSN

Huawei Certified Network Professional- Constructing Big Data Solution

HCIE-Storage

HCIA-Cloud Service V2.2

Huawei Certified Pre-sales Associate-IP Network(Datacom)-ENU

Huawei Certified Pre-sales Associate - ECC (HCPA-ECC)

HCNA - Carrier IP

HCIP-Cloud Computing-CDSM

HCIA-SDN

Filters

Exam 2: HHCIA Routing&Switching

The network administrator needs to configure static NAT on RTA, in order to allow Host A to communicate with Host C. Which command is correct?

Which of the following interfaces can transmit video and audio signals?

An administrator of a company supporting a large enterprise network wishes to implement OSPF on the network as opposed to RIP. Which of the following points should the administrator use to support his reasoning for this change? (Choose three)

Which of the following commands can be used to view the current configurations on a Huawei router?

On Huawei VRP platform, which of the following can be used to invoke the history command saved by the command line interface? (Choose two)

A user can view the information for the RIP protocol on a router. What does "Age time" in the returned result of the command mean?

After a command for displaying RIP route information is entered on a router, peer 192.168.1.2 on Serial1/0/0 is displayed in the returned result. What does 192.168.1.2 stand for?

As shown in the figure, which of the following ports will become the designated port?

Which of the following commands is used to enable dynamic address mapping protocol in the interface encapsulated with Frame Relay?

When two MCU cascade, scheduling a meeting, besides, superior and subordinate MCU as a virtual venue respectively join the conference.

An AR2200 router in the company network cannot boot. In order to resolve this, the administrator wishes to update the VRP software. What should he/she do?

Which of the following entries is not included in the routing table?

Refer to the configuration output. Which of the following statements regarding ACL 2001 is correct?

Which of the following WLAN standards support operation in the 5GHz range? (Choose all that apply)

Refer to the graphic. GE0/0/1 and GE0/0/2 on the switch are configured as hybrid interfaces. Which of the following statements are true? (Choose all that apply)

Which of the following statements about the "ip route-static 10.0.2.2 255.255.255.255 10.0.12.2 preference 20" command is true?

Which of the following packets are OSPF packets?

If AH and ESP are both required to protect data streams between IPsec peers, how many Security Associations (SA) are required in total?

According to OSI reference model, which layer is responsible for end to end error checking and flow control?

HCNA-VC (Huawei Certified Network Associate - Video Conference)

HCNP-R&S-IERN (Huawei Certified Network Professional-Implementing Enterprise Routing Network)

HCNP-R&S-IENPÂ (Huawei Certified Network Professional-Improving Enterprise Network Performance)

HCNP-R&S Fast Track (Huawei Certified Network Professional - Routing & Switching Fast Track)

HCIE-R&S (Written) (Huawei Certified Internetwork Expert-Routing & Switching)

HCNA-Security-CBSN (Huawei Certified Network Associate - Constructing Basic Security Network)

HCNA-Storage-BSSN (Huawei Certified Network Associate - Building the Structure of Storage Network)

HCNA-Storage-BSSN

Huawei Certified Network Professional- Constructing Big Data Solution

HCIE-Storage

HCIA-Cloud Service V2.2

Huawei Certified Pre-sales Associate-IP Network(Datacom)-ENU

Huawei Certified Pre-sales Associate - ECC (HCPA-ECC)

HCNA - Carrier IP

HCIP-Cloud Computing-CDSM

HCIA-SDN

Filters