Question 1

Which of the following statements about a designated port working in RIPv2 multicast mode are true? (Choose three)

Accepted Answer

A)  The port receives only RIPv2 multicast packets. 
B)  The port does not receive RIPv1 broadcast packets. 
C)  The port does not receive RIPv2 broadcast packets. 
D)  The port receives only RIPv1 multicast packets. 
A)  The port receives only RIPv2 multicast packets. 
B)  The port does not receive RIPv1 broadcast packets. 
C)  The port does not receive RIPv2 broadcast packets. 
D)  The port receives only RIPv1 multicast packets. A,B,C

Question 2

Which of the following data packets are the OPSF protocol packets encapsulated into?

Accepted Answer

A)  HTTP packet 
B)  TCP packet 
C)  IP packet 
D)  UDP packet 
A)  HTTP packet 
B)  TCP packet 
C)  IP packet 
D)  UDP packet C

Question 3

Refer to the configuration output. Which following statements are correct? (Multiple choice)

Accepted Answer

A)  VLAN 1 cannot pass over interface Gigabit Ethernet 0/0/1. 
B)  VLAN 1 can pass over interface Gigabit Ethernet 0/0/1. 
C)  Prior to changing the link-type to access, the command "undo port trunk allow-pass vlan all" must be used to renew the default configurations. 
D)  Prior to changing the link-type to access, the command "undo port trunk allow-pass vlan 2 to 4096" must be used to renew the default configurations. 
A)  VLAN 1 cannot pass over interface Gigabit Ethernet 0/0/1. 
B)  VLAN 1 can pass over interface Gigabit Ethernet 0/0/1. 
C)  Prior to changing the link-type to access, the command "undo port trunk allow-pass vlan all" must be used to renew the default configurations. 
D)  Prior to changing the link-type to access, the command "undo port trunk allow-pass vlan 2 to 4096" must be used to renew the default configurations. A,D

Question 4

The network administrator has decided to configure link aggregation in the enterprise network. Which of the following represent advantages of link aggregation? (Choose three)

Accepted Answer

A)  Load balancing. 
B)  Improved bandwidth. 
C)  Enhanced reliability. 
D)  Improved security. 
A)  Load balancing. 
B)  Improved bandwidth. 
C)  Enhanced reliability. 
D)  Improved security.

Question 5

Whilst configuring a device, an administrator experiences trouble remembering certain commands. Which of the following will help support the administrator? (Choose two)

Accepted Answer

A)  TAB 
B)  question mark 
C)  ctrl+b 
D)  ctrl+c 
A)  TAB 
B)  question mark 
C)  ctrl+b 
D)  ctrl+c

Question 6

An ACL does not filter traffic generated by the Huawei device towards other devices, but only filters forwarded traffic, including traffic generated by other devices to access the Huawei device.

Accepted Answer

A) True 
 B)False

Question 7

Which of the following statements is true about the MAC address table of a switch?

Accepted Answer

A)  The MAC address 5489-9811-0b49 is manually configured by the administrator. 
B)  The MAC address 5489-989d-1d30 is manually configured by the administrator. 
C)  The MAC address 5489-9885-18a8 is manually configured by the administrator. 
D)  After the switch restarts, all the MAC addresses need to be learned again. 
A)  The MAC address 5489-9811-0b49 is manually configured by the administrator. 
B)  The MAC address 5489-989d-1d30 is manually configured by the administrator. 
C)  The MAC address 5489-9885-18a8 is manually configured by the administrator. 
D)  After the switch restarts, all the MAC addresses need to be learned again.

Question 8

Which of the following items can be translated by NAPT?

Accepted Answer

A)  MAC address + port number 
B)  IP address + port number 
C)  Only MAC address 
D)  Only IP address 
A)  MAC address + port number 
B)  IP address + port number 
C)  Only MAC address 
D)  Only IP address

Question 9

Which of the following statements about router IDs are true? (Choose two)

Accepted Answer

A)  The routers contained in the same LSDB have the same router ID. 
B)  Each router in an OSPF network must have a unique router ID. 
C)  Two routers in different OSPF areas can have the same router ID. 
D)  A router ID is expressed in a 32-bit dotted decimal format. 
A)  The routers contained in the same LSDB have the same router ID. 
B)  Each router in an OSPF network must have a unique router ID. 
C)  Two routers in different OSPF areas can have the same router ID. 
D)  A router ID is expressed in a 32-bit dotted decimal format.

Question 10

Host A wishes to send data to host C, and generates an ARP request to obtain the destination MAC address.   Which statement is true?

Accepted Answer

A)  The destination IP address of the ARP request is Host C 
B)  The destination MAC address of this ARP request is Host C 
C)  The destination IP address for the ARP request is a broadcast IP address. 
D)  The destination MAC address of this frame is the MAC address of G0/0/0 on RTA. 
A)  The destination IP address of the ARP request is Host C 
B)  The destination MAC address of this ARP request is Host C 
C)  The destination IP address for the ARP request is a broadcast IP address. 
D)  The destination MAC address of this frame is the MAC address of G0/0/0 on RTA.

Question 11

A RIP router receives the routing update information from its neighbor. Which of the following statements regarding routing update are correct? (Choose three)

Accepted Answer

A)  The received route that is not in the routing table will be added only when its hop count value is less than 16. 
B)  The received route that already exists in the routing table will be updated only when the next hop is the router's neighbor and the cost value is smaller. 
C)  The received route that already exists in the routing table will be updated only when the next hop is not the router's neighbor and the cost value is smaller. 
D)  The received route that already exists in the routing table will be updated only when the next hop is the router's neighbor and the cost value has been changed. 
A)  The received route that is not in the routing table will be added only when its hop count value is less than 16. 
B)  The received route that already exists in the routing table will be updated only when the next hop is the router's neighbor and the cost value is smaller. 
C)  The received route that already exists in the routing table will be updated only when the next hop is not the router's neighbor and the cost value is smaller. 
D)  The received route that already exists in the routing table will be updated only when the next hop is the router's neighbor and the cost value has been changed.

Question 12

Which of the following descriptions about STP are incorrect? (Multiple Choice)

Accepted Answer

A)  A layer-2 switching network can have only one designated switch. 
B)  All the ports of the root switch are root ports. 
C)  All the ports of the root switch are designated ports. 
D)  The switch with the smallest priority value is elected as non-root switch. 
A)  A layer-2 switching network can have only one designated switch. 
B)  All the ports of the root switch are root ports. 
C)  All the ports of the root switch are designated ports. 
D)  The switch with the smallest priority value is elected as non-root switch.

Question 13

Two routers are configured with OSPFv3. OSPFv3 is enabled on all interfaces of each router. Which of the following is true in the event that the network administrator does not configure a Router-ID?

Accepted Answer

A)  The IP address of the loopback 0 interface will be used as the router ID. 
B)  The IP address of the loopback 1 interface will be used as the router ID. 
C)  The IP address of interface G0/0/0 will be used as the router ID. 
D)  No router ID will be assigned to the router. 
A)  The IP address of the loopback 0 interface will be used as the router ID. 
B)  The IP address of the loopback 1 interface will be used as the router ID. 
C)  The IP address of interface G0/0/0 will be used as the router ID. 
D)  No router ID will be assigned to the router.

Question 14

What is the value of the Flag field in the PPP frame format?

Accepted Answer

A)  0x7E 
B)  0xFF 
C)  0x8E 
D)  0xEF 
A)  0x7E 
B)  0xFF 
C)  0x8E 
D)  0xEF

Question 15

The IPv6 address architecture does not include which of the following address types?

Accepted Answer

A)  unicast 
B)  multicast 
C)  broadcast 
D)  anycast 
A)  unicast 
B)  multicast 
C)  broadcast 
D)  anycast

Question 16

What is the default priority of static routes on a Huawei AR router?

Accepted Answer

A)  120 
B)  60 
C)  0 
D)  100 
A)  120 
B)  60 
C)  0 
D)  100

Question 17

Which of the following mechanisms are used for flow control? (Choose three)

Accepted Answer

A)  Acknowledgement 
B)  Buffering 
C)  Source quench messages 
D)  Windowing 
A)  Acknowledgement 
B)  Buffering 
C)  Source quench messages 
D)  Windowing

Question 18

Which of the following commands can be used to display mapping relationship between network address and DLCI?

Accepted Answer

A)  display fr interface 
B)  display fr 
C)  display fr map-info 
D)  display fr brief 
A)  display fr interface 
B)  display fr 
C)  display fr map-info 
D)  display fr brief

Question 19

RRJ is registration confirmation signaling of the terminal registered GK.

Accepted Answer

A) True 
 B)False

Question 20

Which of the following is not video input port of HD terminal?

Accepted Answer

A)  SD IN 
B)  HD IN 
C)  S-VIDEO 
D)  AUDIO IN 
A)  SD IN 
B)  HD IN 
C)  S-VIDEO 
D)  AUDIO IN

Which of the following statements about a designated port working in RIPv2 multicast mode are true? (Choose three)

Which of the following data packets are the OPSF protocol packets encapsulated into?

Refer to the configuration output. Which following statements are correct? (Multiple choice)

The network administrator has decided to configure link aggregation in the enterprise network. Which of the following represent advantages of link aggregation? (Choose three)

Whilst configuring a device, an administrator experiences trouble remembering certain commands. Which of the following will help support the administrator? (Choose two)

An ACL does not filter traffic generated by the Huawei device towards other devices, but only filters forwarded traffic, including traffic generated by other devices to access the Huawei device.

Which of the following statements is true about the MAC address table of a switch?

Which of the following items can be translated by NAPT?

Which of the following statements about router IDs are true? (Choose two)

Host A wishes to send data to host C, and generates an ARP request to obtain the destination MAC address. Which statement is true?

A RIP router receives the routing update information from its neighbor. Which of the following statements regarding routing update are correct? (Choose three)

Which of the following descriptions about STP are incorrect? (Multiple Choice)

Two routers are configured with OSPFv3. OSPFv3 is enabled on all interfaces of each router. Which of the following is true in the event that the network administrator does not configure a Router-ID?

What is the value of the Flag field in the PPP frame format?

The IPv6 address architecture does not include which of the following address types?

What is the default priority of static routes on a Huawei AR router?

Which of the following mechanisms are used for flow control? (Choose three)

Which of the following commands can be used to display mapping relationship between network address and DLCI?

RRJ is registration confirmation signaling of the terminal registered GK.

Which of the following is not video input port of HD terminal?

HCNA-VC (Huawei Certified Network Associate - Video Conference)

HCNP-R&S-IERN (Huawei Certified Network Professional-Implementing Enterprise Routing Network)

HCNP-R&S-IENPÂ (Huawei Certified Network Professional-Improving Enterprise Network Performance)

HCNP-R&S Fast Track (Huawei Certified Network Professional - Routing & Switching Fast Track)

HCIE-R&S (Written) (Huawei Certified Internetwork Expert-Routing & Switching)

HCNA-Security-CBSN (Huawei Certified Network Associate - Constructing Basic Security Network)

HCNA-Storage-BSSN (Huawei Certified Network Associate - Building the Structure of Storage Network)

HCNA-Storage-BSSN

Huawei Certified Network Professional- Constructing Big Data Solution

HCIE-Storage

HCIA-Cloud Service V2.2

Huawei Certified Pre-sales Associate-IP Network(Datacom)-ENU

Huawei Certified Pre-sales Associate - ECC (HCPA-ECC)

HCNA - Carrier IP

HCIP-Cloud Computing-CDSM

HCIA-SDN

Filters

Exam 2: HHCIA Routing&Switching

Which of the following statements about a designated port working in RIPv2 multicast mode are true? (Choose three)

Which of the following data packets are the OPSF protocol packets encapsulated into?

Refer to the configuration output. Which following statements are correct? (Multiple choice)

The network administrator has decided to configure link aggregation in the enterprise network. Which of the following represent advantages of link aggregation? (Choose three)

Whilst configuring a device, an administrator experiences trouble remembering certain commands. Which of the following will help support the administrator? (Choose two)

An ACL does not filter traffic generated by the Huawei device towards other devices, but only filters forwarded traffic, including traffic generated by other devices to access the Huawei device.

Which of the following statements is true about the MAC address table of a switch?

Which of the following items can be translated by NAPT?

Which of the following statements about router IDs are true? (Choose two)

Host A wishes to send data to host C, and generates an ARP request to obtain the destination MAC address. Which statement is true?

A RIP router receives the routing update information from its neighbor. Which of the following statements regarding routing update are correct? (Choose three)

Which of the following descriptions about STP are incorrect? (Multiple Choice)

Two routers are configured with OSPFv3. OSPFv3 is enabled on all interfaces of each router. Which of the following is true in the event that the network administrator does not configure a Router-ID?

What is the value of the Flag field in the PPP frame format?

The IPv6 address architecture does not include which of the following address types?

What is the default priority of static routes on a Huawei AR router?

Which of the following mechanisms are used for flow control? (Choose three)

Which of the following commands can be used to display mapping relationship between network address and DLCI?

RRJ is registration confirmation signaling of the terminal registered GK.

Which of the following is not video input port of HD terminal?

HCNA-VC (Huawei Certified Network Associate - Video Conference)

HCNP-R&S-IERN (Huawei Certified Network Professional-Implementing Enterprise Routing Network)

HCNP-R&S-IENPÂ (Huawei Certified Network Professional-Improving Enterprise Network Performance)

HCNP-R&S Fast Track (Huawei Certified Network Professional - Routing & Switching Fast Track)

HCIE-R&S (Written) (Huawei Certified Internetwork Expert-Routing & Switching)

HCNA-Security-CBSN (Huawei Certified Network Associate - Constructing Basic Security Network)

HCNA-Storage-BSSN (Huawei Certified Network Associate - Building the Structure of Storage Network)

HCNA-Storage-BSSN

Huawei Certified Network Professional- Constructing Big Data Solution

HCIE-Storage

HCIA-Cloud Service V2.2

Huawei Certified Pre-sales Associate-IP Network(Datacom)-ENU

Huawei Certified Pre-sales Associate - ECC (HCPA-ECC)

HCNA - Carrier IP

HCIP-Cloud Computing-CDSM

HCIA-SDN

Filters