Question 1

If Frame Relay implements dynamic address mapping for the PVC, which protocol will be used?

Accepted Answer

A)  LMI protocol 
B)  ARP protocol 
C)  RARP protocol 
D)  InARP protocol 
A)  LMI protocol 
B)  ARP protocol 
C)  RARP protocol 
D)  InARP protocol

Question 2

Which of the following statements regarding the routing table are correct? (Choose all that apply.)

Accepted Answer

A)  The next hop in the routing table is redundant because the outgoing interface can be used for packet forwarding. 
B)  The routes from generated by different protocols have different preferences. 
C)  The metrics of different routing protocols are comparable. 
D)  The metrics of different routing protocols are not comparable 
A)  The next hop in the routing table is redundant because the outgoing interface can be used for packet forwarding. 
B)  The routes from generated by different protocols have different preferences. 
C)  The metrics of different routing protocols are comparable. 
D)  The metrics of different routing protocols are not comparable

Question 3

Superior MCU can have multiple subordinate MCU: subordinate MCU can also have multiple superior MCU.

Accepted Answer

A) True 
 B)False

Question 4

On the VRP, what is the function of the "interface vlanif <vlan-id>" command?

Accepted Answer

A)  It is used to create a VLANIF interface 
B)  It is used to create a VLANIF interface and enter the VLANIF interface view 
C)  It is used to configure a VLAN for a VLANIF interface 
D)  There is no such command 
A)  It is used to create a VLANIF interface 
B)  It is used to create a VLANIF interface and enter the VLANIF interface view 
C)  It is used to configure a VLAN for a VLANIF interface 
D)  There is no such command

Question 5

With what kind of routers does a DRother router exchange link state information and route information? (Choose two)

Accepted Answer

A)  DR 
B)  BDR 
C)  DRother 
D)  All OSPF neighbors 
A)  DR 
B)  BDR 
C)  DRother 
D)  All OSPF neighbors

Question 6

Which of the following statements are true about STP BPDUs?

Accepted Answer

A)  During initialization, each switch enabled with STP proactively sends configuration BPDUs. 
B)  BPDUs are encapsulated in Ethernet frames and the destination MAC address is a multicast MAC address. 
C)  After STP is enabled on a port, the switch periodically sends TCN BPDUs through the designated port. 
D)  STP has two types of packets: configuration BPDU and TCN BPDU. 
A)  During initialization, each switch enabled with STP proactively sends configuration BPDUs. 
B)  BPDUs are encapsulated in Ethernet frames and the destination MAC address is a multicast MAC address. 
C)  After STP is enabled on a port, the switch periodically sends TCN BPDUs through the designated port. 
D)  STP has two types of packets: configuration BPDU and TCN BPDU.

Question 7

What are the advantages of OSPF?

Accepted Answer

A)  OSPF supports packet authentication. 
B)  OSPF can load balance traffic among equal-cost routes. 
C)  OSPF supports Classless Inter-Domain Routing (CIDR). 
D)  OSPF supports area partition. 
A)  OSPF supports packet authentication. 
B)  OSPF can load balance traffic among equal-cost routes. 
C)  OSPF supports Classless Inter-Domain Routing (CIDR). 
D)  OSPF supports area partition.

Question 8

On the command line interface of Huawei AR routers, the role of the Save command is to Save the current system time.

Accepted Answer

A) True 
 B)False

Question 9

Which of the following commands is used to display the OSPF neighbor relationship establishment?

Accepted Answer

A)  display ospf neighbor 
B)  display ospf brief 
C)  display ospf peer 
D)  display ospf interface 
A)  display ospf neighbor 
B)  display ospf brief 
C)  display ospf peer 
D)  display ospf interface

Question 10

Which of the following statements about the "ip route-static 10.0.2.2 255.255.255.255 10.0.12.2 preference 20" command is true?

Accepted Answer

A)  The destination network address of the route is 10.0.12.2/32. 
B)  The mask length of the destination network address of the route is 32 bits. 
C)  The preference of the route is 100. 
D)  The route must exist in the routing table. 
A)  The destination network address of the route is 10.0.12.2/32. 
B)  The mask length of the destination network address of the route is 32 bits. 
C)  The preference of the route is 100. 
D)  The route must exist in the routing table.

Question 11

If the IPv4 address of a host on a local area network (LAN) is 192.168.1.1/30, which of the following destination IPv4 addresses can be carried in data packets that the host can decapsulate?

Accepted Answer

A)  192.168.1.1 
B)  192.168.1.2 
C)  192.168.1.3 
D)  255.255.255.255 
A)  192.168.1.1 
B)  192.168.1.2 
C)  192.168.1.3 
D)  255.255.255.255

Question 12

You can run the "startup saved-configuration backup.cfg" command on the user interface of the Versatile Routing Platform (VRP) to specify the "backup.cfg" file as the configuration file for next startup.

Accepted Answer

A) True 
 B)False

Question 13

ICMP packets do not contain port numbers. Therefore, NAPT cannot be used.

Accepted Answer

A) True 
 B)False

Question 14

Segment routing (SR) defines destination address prefixes/nodes and adjacencies on the network as segments and allocates segment IDs (SIDs) to these segments. Adjacency and prefix/node SIDs are non-sequentially arranged in a segment list to form a forwarding path.

Accepted Answer

A) True 
 B)False

Question 15

On Huawei switches, you can run the vlan batch command to create multiple VLANs in batches.

Accepted Answer

A) True 
 B)False

Question 16

What is CIF resolution ratio?

Accepted Answer

A)  352*288 
B)  704*576 
C)  1280*720 
D)  1920*1080 
A)  352*288 
B)  704*576 
C)  1280*720 
D)  1920*1080

Question 17

Which of the following types can ICMP packets be classified into? (Choose two)

Accepted Answer

A)  ICMP transport packet 
B)  ICMP error reporting packet 
C)  ICMP query packet 
D)  ICMP application packet 
A)  ICMP transport packet 
B)  ICMP error reporting packet 
C)  ICMP query packet 
D)  ICMP application packet

Question 18

GCCA Board only can be installed in 1 slot of MCU8650.

Accepted Answer

A) True 
 B)False

Question 19

Which of the following statements about collision domains and broadcast domains are correct? (Choose three)

Accepted Answer

A)  Devices connected to the same hub form a collision domain 
B)  Devices connected to the same hub form a broadcast domain 
C)  Devices connected to the same bridge form a collision domain 
D)  Devices connected to the same bridge form a broadcast domain 
E)  Devices connected to the same router form a broadcast domain 
A)  Devices connected to the same hub form a collision domain 
B)  Devices connected to the same hub form a broadcast domain 
C)  Devices connected to the same bridge form a collision domain 
D)  Devices connected to the same bridge form a broadcast domain 
E)  Devices connected to the same router form a broadcast domain

Question 20

According to the configuration on R1 shown in the following figure, the two PCs can correctly access the ISP network.

Accepted Answer

A) True 
 B)False

If Frame Relay implements dynamic address mapping for the PVC, which protocol will be used?

Which of the following statements regarding the routing table are correct? (Choose all that apply.)

Superior MCU can have multiple subordinate MCU: subordinate MCU can also have multiple superior MCU.

On the VRP, what is the function of the "interface vlanif <vlan-id>" command?

With what kind of routers does a DRother router exchange link state information and route information? (Choose two)

Which of the following statements are true about STP BPDUs?

What are the advantages of OSPF?

On the command line interface of Huawei AR routers, the role of the Save command is to Save the current system time.

Which of the following commands is used to display the OSPF neighbor relationship establishment?

Which of the following statements about the "ip route-static 10.0.2.2 255.255.255.255 10.0.12.2 preference 20" command is true?

If the IPv4 address of a host on a local area network (LAN) is 192.168.1.1/30, which of the following destination IPv4 addresses can be carried in data packets that the host can decapsulate?

You can run the "startup saved-configuration backup.cfg" command on the user interface of the Versatile Routing Platform (VRP) to specify the "backup.cfg" file as the configuration file for next startup.

ICMP packets do not contain port numbers. Therefore, NAPT cannot be used.

Segment routing (SR) defines destination address prefixes/nodes and adjacencies on the network as segments and allocates segment IDs (SIDs) to these segments. Adjacency and prefix/node SIDs are non-sequentially arranged in a segment list to form a forwarding path.

On Huawei switches, you can run the vlan batch command to create multiple VLANs in batches.

What is CIF resolution ratio?

Which of the following types can ICMP packets be classified into? (Choose two)

GCCA Board only can be installed in 1 slot of MCU8650.

Which of the following statements about collision domains and broadcast domains are correct? (Choose three)

According to the configuration on R1 shown in the following figure, the two PCs can correctly access the ISP network.

HCNA-VC (Huawei Certified Network Associate - Video Conference)

HCNP-R&S-IERN (Huawei Certified Network Professional-Implementing Enterprise Routing Network)

HCNP-R&S-IENPÂ (Huawei Certified Network Professional-Improving Enterprise Network Performance)

HCNP-R&S Fast Track (Huawei Certified Network Professional - Routing & Switching Fast Track)

HCIE-R&S (Written) (Huawei Certified Internetwork Expert-Routing & Switching)

HCNA-Security-CBSN (Huawei Certified Network Associate - Constructing Basic Security Network)

HCNA-Storage-BSSN (Huawei Certified Network Associate - Building the Structure of Storage Network)

HCNA-Storage-BSSN

Huawei Certified Network Professional- Constructing Big Data Solution

HCIE-Storage

HCIA-Cloud Service V2.2

Huawei Certified Pre-sales Associate-IP Network(Datacom)-ENU

Huawei Certified Pre-sales Associate - ECC (HCPA-ECC)

HCNA - Carrier IP

HCIP-Cloud Computing-CDSM

HCIA-SDN

Filters

Exam 2: HHCIA Routing&Switching

If Frame Relay implements dynamic address mapping for the PVC, which protocol will be used?

Which of the following statements regarding the routing table are correct? (Choose all that apply.)

Superior MCU can have multiple subordinate MCU: subordinate MCU can also have multiple superior MCU.

On the VRP, what is the function of the "interface vlanif <vlan-id>" command?

With what kind of routers does a DRother router exchange link state information and route information? (Choose two)

Which of the following statements are true about STP BPDUs?

What are the advantages of OSPF?

On the command line interface of Huawei AR routers, the role of the Save command is to Save the current system time.

Which of the following commands is used to display the OSPF neighbor relationship establishment?

Which of the following statements about the "ip route-static 10.0.2.2 255.255.255.255 10.0.12.2 preference 20" command is true?

If the IPv4 address of a host on a local area network (LAN) is 192.168.1.1/30, which of the following destination IPv4 addresses can be carried in data packets that the host can decapsulate?

You can run the "startup saved-configuration backup.cfg" command on the user interface of the Versatile Routing Platform (VRP) to specify the "backup.cfg" file as the configuration file for next startup.

ICMP packets do not contain port numbers. Therefore, NAPT cannot be used.

Segment routing (SR) defines destination address prefixes/nodes and adjacencies on the network as segments and allocates segment IDs (SIDs) to these segments. Adjacency and prefix/node SIDs are non-sequentially arranged in a segment list to form a forwarding path.

On Huawei switches, you can run the vlan batch command to create multiple VLANs in batches.

What is CIF resolution ratio?

Which of the following types can ICMP packets be classified into? (Choose two)

GCCA Board only can be installed in 1 slot of MCU8650.

Which of the following statements about collision domains and broadcast domains are correct? (Choose three)

According to the configuration on R1 shown in the following figure, the two PCs can correctly access the ISP network.

HCNA-VC (Huawei Certified Network Associate - Video Conference)

HCNP-R&S-IERN (Huawei Certified Network Professional-Implementing Enterprise Routing Network)

HCNP-R&S-IENPÂ (Huawei Certified Network Professional-Improving Enterprise Network Performance)

HCNP-R&S Fast Track (Huawei Certified Network Professional - Routing & Switching Fast Track)

HCIE-R&S (Written) (Huawei Certified Internetwork Expert-Routing & Switching)

HCNA-Security-CBSN (Huawei Certified Network Associate - Constructing Basic Security Network)

HCNA-Storage-BSSN (Huawei Certified Network Associate - Building the Structure of Storage Network)

HCNA-Storage-BSSN

Huawei Certified Network Professional- Constructing Big Data Solution

HCIE-Storage

HCIA-Cloud Service V2.2

Huawei Certified Pre-sales Associate-IP Network(Datacom)-ENU

Huawei Certified Pre-sales Associate - ECC (HCPA-ECC)

HCNA - Carrier IP

HCIP-Cloud Computing-CDSM

HCIA-SDN

Filters