Question 1

The band is a friction-lined steel belt that wraps around the outside of a drum inside the automatic transmission.

Accepted Answer

A) True 
 B)False

Question 2

The starter ring gear is usually welded to the flex plate.

Accepted Answer

A) True 
 B)False

Question 3

What type of clutches are used to hold or drive individual members of the planetary set in an automatic transmission?

Accepted Answer

A)  Single-disc dry clutch 
B)  Single-disc wet clutch 
C)  Multi-disc wet clutch 
D)  Multi-disc dry clutch 
A)  Single-disc dry clutch 
B)  Single-disc wet clutch 
C)  Multi-disc wet clutch 
D)  Multi-disc dry clutch

Question 4

What are Torrington bearings?

Accepted Answer

A)  A friction type thrust bearing 
B)  Bearings made of steel coated with a bronze bearing material 
C)  A needle or roller type, thrust bearing 
D)  None of the above 
A)  A friction type thrust bearing 
B)  Bearings made of steel coated with a bronze bearing material 
C)  A needle or roller type, thrust bearing 
D)  None of the above

Question 5

Technician A says the multi-disc clutch can hold one member of the planetary gear set stationary. Technician B says the multi-disc clutch can transmit twisting force from one component to another. Who is correct?

Accepted Answer

A)  Technician A 
B)  Technician B 
C)  Both A and B 
D)  Neither A nor B 
A)  Technician A 
B)  Technician B 
C)  Both A and B 
D)  Neither A nor B

Question 6

Technician A says a servo-operated band can only hold a member stationary. Technician B says multidisc clutches can hold or drive individual members of the planetary set. Who is correct?

Accepted Answer

A)  Technician A 
B)  Technician B 
C)  Both A and B 
D)  Neither A nor B 
A)  Technician A 
B)  Technician B 
C)  Both A and B 
D)  Neither A nor B

Question 7

Which of the following parts are parts of a servo?

Accepted Answer

A)  A cylinder containing a piston 
B)  A piston return spring 
C)  A pushrod 
D)  All of the abve 
A)  A cylinder containing a piston 
B)  A piston return spring 
C)  A pushrod 
D)  All of the abve

Question 8

What type of resistor is a transmission fluid temperature sensor?

Accepted Answer

A)  Thermistor 
B)  Rheostat 
C)  Potentiometer 
D)  Tapped resistor 
A)  Thermistor 
B)  Rheostat 
C)  Potentiometer 
D)  Tapped resistor

Question 9

The PCM monitors the TPS sensor along with the VSS to determine a driver's ________.

Accepted Answer

A)  Driving pattern 
B)  Adaptive memory 
C)  Identification 
D)  Environment 
A)  Driving pattern 
B)  Adaptive memory 
C)  Identification 
D)  Environment

Question 10

Which of the following sensors does the Powertrain Control Module (PCM) compare to the input shaft speed sensor to determine the amount of torque converter slippage and to control the lockup of the Torque Converter Clutch (TCC).

Accepted Answer

A)  CKP sensor 
B)  MAF sensor 
C)  MAP sensor 
D)  None of the above 
A)  CKP sensor 
B)  MAF sensor 
C)  MAP sensor 
D)  None of the above

Question 11

The output shaft bushing is subject to higher amounts of wear from the spinning of the drive shaft. What other drive shaft action tends to wear this bearing?

Accepted Answer

A)  In-and-out 
B)  Up-and-down 
C)  Left-to-right 
D)  Rotating 
A)  In-and-out 
B)  Up-and-down 
C)  Left-to-right 
D)  Rotating

Question 12

The differential is located in the transmission assembly on transaxles, which are used mostly on rear wheel drive vehicles.

Accepted Answer

A) True 
 B)False

Question 13

Technician A says modern automatic transmission cases are made of lightweight aluminum and alloys. Technician B says on the rear or output side of the transmission, there is a housing called the extension housing. Who is correct?

Accepted Answer

A)  Technician A 
B)  Technician B 
C)  Both A and B 
D)  Neither A nor B 
A)  Technician A 
B)  Technician B 
C)  Both A and B 
D)  Neither A nor B

Question 14

Which of the following describes torque multiplication in a torque converter?

Accepted Answer

A)  Increases with turbine speed 
B)  Is maximum at converter stall 
C)  Decreases with impeller speed 
D)  Both A and B 
A)  Increases with turbine speed 
B)  Is maximum at converter stall 
C)  Decreases with impeller speed 
D)  Both A and B

Question 15

Which of the following statements is TRUE about cast iron pump housings?

Accepted Answer

A)  They resist wear very well 
B)  They require replacement less often than aluminum pump housings 
C)  They are much heavier than aluminum 
D)  All of the above are true 
A)  They resist wear very well 
B)  They require replacement less often than aluminum pump housings 
C)  They are much heavier than aluminum 
D)  All of the above are true

Question 16

Transmission servo pistons are usually oval.

Accepted Answer

A) True 
 B)False

Question 17

Which of the following sensors can be used by the Powertrain Control Module (PCM) to judge engine load?

Accepted Answer

A)  Manifold absolute pressure (MAP) 
B)  Accelerator Pedal Position Sensor (APPS) 
C)  Mass airflow (MAF) 
D)  Both A and C 
A)  Manifold absolute pressure (MAP) 
B)  Accelerator Pedal Position Sensor (APPS) 
C)  Mass airflow (MAF) 
D)  Both A and C

Question 18

Tech A states that all automatic transmissions will utilize dog clutches for some gear ratios. Tech B states that many transmissions use multidisc clutches to hold planetary gear set components. Who is correct?

Accepted Answer

A)  Tech A 
B)  Tech B 
C)  Both A and B 
D)  Neither A nor B 
A)  Tech A 
B)  Tech B 
C)  Both A and B 
D)  Neither A nor B

Question 19

Tech A says that snap rings need to be replaced if they are worn out. Tech B says that snap rings are not required to be reinstalled into the transmission because they were only used for the initial assembly process. Who is correct?

Accepted Answer

A)  Tech A 
B)  Tech B 
C)  Both A and B 
D)  Neither A nor B 
A)  Tech A 
B)  Tech B 
C)  Both A and B 
D)  Neither A nor B

Question 20

Choose the correct statement with respect to the spring in a parking pawl.

Accepted Answer

A)  It will cause a loud ratcheting noise. 
B)  It will prevent rotation of the output shaft when it is engaged. 
C)  It can be released with a scan tool. 
D)  It is designed to help minimize damage to the parking pawl and the output shaft. 
A)  It will cause a loud ratcheting noise. 
B)  It will prevent rotation of the output shaft when it is engaged. 
C)  It can be released with a scan tool. 
D)  It is designed to help minimize damage to the parking pawl and the output shaft.

Exam 7: Transmission Components

The band is a friction-lined steel belt that wraps around the outside of a drum inside the automatic transmission.

The starter ring gear is usually welded to the flex plate.

What type of clutches are used to hold or drive individual members of the planetary set in an automatic transmission?

What are Torrington bearings?

Technician A says the multi-disc clutch can hold one member of the planetary gear set stationary. Technician B says the multi-disc clutch can transmit twisting force from one component to another. Who is correct?

Technician A says a servo-operated band can only hold a member stationary. Technician B says multidisc clutches can hold or drive individual members of the planetary set. Who is correct?

Which of the following parts are parts of a servo?

What type of resistor is a transmission fluid temperature sensor?

The PCM monitors the TPS sensor along with the VSS to determine a driver's ________.

Which of the following sensors does the Powertrain Control Module (PCM) compare to the input shaft speed sensor to determine the amount of torque converter slippage and to control the lockup of the Torque Converter Clutch (TCC).

The output shaft bushing is subject to higher amounts of wear from the spinning of the drive shaft. What other drive shaft action tends to wear this bearing?

The differential is located in the transmission assembly on transaxles, which are used mostly on rear wheel drive vehicles.

Technician A says modern automatic transmission cases are made of lightweight aluminum and alloys. Technician B says on the rear or output side of the transmission, there is a housing called the extension housing. Who is correct?

Which of the following describes torque multiplication in a torque converter?

Which of the following statements is TRUE about cast iron pump housings?

Transmission servo pistons are usually oval.

Which of the following sensors can be used by the Powertrain Control Module (PCM) to judge engine load?

Tech A states that all automatic transmissions will utilize dog clutches for some gear ratios. Tech B states that many transmissions use multidisc clutches to hold planetary gear set components. Who is correct?

Tech A says that snap rings need to be replaced if they are worn out. Tech B says that snap rings are not required to be reinstalled into the transmission because they were only used for the initial assembly process. Who is correct?

Choose the correct statement with respect to the spring in a parking pawl.

Strategy-Based Diagnostics

Safety

Basic Tools and Precision Measuring

Fasteners and Thread Repair

Vehicle, Customer, and Service Information

Automatic Transmission Fundamentals

Hydraulic Fundamentals

Torque Converter Principles

Hydraulically Controlled Transmission

Electronically Controlled Transmission

In-Vehicle Transmission Repairs

Transmission Removal

Transmission Disassembly

Hydraulic System Rebuilding

Gear Train Rebuilding

Valve Body and Electric Service

Transmission Reassembly

Transmission Reinstallation

Dual Clutch Transmissions

Continuously Variable Transmissions

Hybrid Transmissions

Honda Transmissions

Chrysler 6 Speed 62te Transmission

6t40 6f35 Transmission

Zf 9hp Chrysler 948te Transmission

Ford 6r60 Zf6hp26

Allison 1000 and 2000 Series Transmissions

Filters