Question 1

Identify the type of transmission fluid used by Ford 6F35 transmission.

Accepted Answer

A)  ATF+4 
B)  Dexron VI 
C)  Type F ATF 
D)  MERCON LV 
A)  ATF+4 
B)  Dexron VI 
C)  Type F ATF 
D)  MERCON LV

Question 2

Which of the following statements is NOT true regarding the 6T40 transmission?

Accepted Answer

A)  The transmission filter cannot be replaced without disassembling the transmission 
B)  The sixth gear is the only overdrive gear. 
C)  There are six planetary gears. 
D)  There are five shift solenoids. 
A)  The transmission filter cannot be replaced without disassembling the transmission 
B)  The sixth gear is the only overdrive gear. 
C)  There are six planetary gears. 
D)  There are five shift solenoids.

Question 3

Technician A says that when a solenoid is faulty, the entire solenoid pack must be replaced. Technician B says when replacing the solenoid pack, a unique identification code must be programmed into the vehicle's PCM. Who is correct?
​

Accepted Answer

A)  Technician A 
B)  Technician B 
C)  Both technicians 
D)  Neither technician 
A)  Technician A 
B)  Technician B 
C)  Both technicians 
D)  Neither technician

Question 4

A vehicle with a 6T40 front-wheel drive transaxle comes into the shop with a faulty transmission filter. Tech A states that the transmission filter cannot be replaced without disassembling the transmission. Tech B states that the transmission filter can be replaced without disassembling the transmission. Who is correct?

Accepted Answer

A)  Tech A 
B)  Tech B 
C)  Both A and B 
D)  Neither A nor B 
A)  Tech A 
B)  Tech B 
C)  Both A and B 
D)  Neither A nor B

Question 5

While rebuilding a 6T40 transmission, you test the solenoids in the valve body. Solenoids A and E both measure 20 ohms. The remaining solenoids measure 4.5 ohms. Tech A states that solenoids A and E need to be replaced. Tech B states that only solenoid A needs to be replaced. Who is correct?

Accepted Answer

A)  Tech A 
B)  Tech B 
C)  Both A and B 
D)  Neither A nor B 
A)  Tech A 
B)  Tech B 
C)  Both A and B 
D)  Neither A nor B

Question 6

The assembly of the forward clutch pack is being discussed. Technician A says that if the clutch pack clearance measures between 0.051" and 1.83", the clutch pack is installed correctly. Technician B says that if the clutch pack clearance is between 0.002 mm and 0.072 mm, the clutch pack is installed correctly. Who is correct?

Accepted Answer

A)  Technician A 
B)  Technician B 
C)  Both Technicians A and B 
D)  Neither Technician A nor B 
A)  Technician A 
B)  Technician B 
C)  Both Technicians A and B 
D)  Neither Technician A nor B

Question 7

Technician A says that the 6T40 GM transmission uses DEXRON VI transmission fluid . Technician B says that the 6T40 GM transmission uses DEXRON IIE transmission fluid . Who is correct?

Accepted Answer

A)  Technician A 
B)  Technician B 
C)  Both technicians 
D)  Neither technician 
A)  Technician A 
B)  Technician B 
C)  Both technicians 
D)  Neither technician

Question 8

A vehicle comes into the shop with a 6F35 transmission that has no reverse or 1st gear. Tech A states that the problem could be a bad solenoid C. Who is correct?

Accepted Answer

A)  Tech A 
B)  Tech B 
C)  Both A and B 
D)  Neither A nor B 
A)  Tech A 
B)  Tech B 
C)  Both A and B 
D)  Neither A nor B

Question 9

Transmission fluid must be drained when its temperature is:

Accepted Answer

A)  above 140˚ F (60˚ 
C) . 
B)  below 140˚ F (60˚ 
C) . 
C)  above 100˚ F (37.78˚ 
C) . 
D)  below 100˚ F (37.78˚ 
C) . 
A)  above 140˚ F (60˚ 
C) . 
B)  below 140˚ F (60˚ 
C) . 
C)  above 100˚ F (37.78˚ 
C) . 
D)  below 100˚ F (37.78˚ 
C) .

Question 10

Technician A says that the shift solenoids A, B, C, and D are on and off solenoids. Technician B says that shift solenoid E is the only variable-force solenoid. Who is correct?

Accepted Answer

A)  Technician A 
B)  Technician B 
C)  Both technicians 
D)  Neither technician 
A)  Technician A 
B)  Technician B 
C)  Both technicians 
D)  Neither technician

Question 11

For how long should all frictions be soaked in (the specified) automatic transmission fluid before being installed into the transmission?

Accepted Answer

A)  At least 15 minutes 
B)  At least 30 minutes 
C)  At least 1 hour 
D)  At least 1 day 
A)  At least 15 minutes 
B)  At least 30 minutes 
C)  At least 1 hour 
D)  At least 1 day

Question 12

Identify the component of 6T40 transmission shown in the given figure.

Accepted Answer

A)  Fluid baffle 
B)  Fluid level control valve 
C)  Fluid fill port 
D)  Fluid level test port 
A)  Fluid baffle 
B)  Fluid level control valve 
C)  Fluid fill port 
D)  Fluid level test port

Question 13

Tech A sates that 6T30 is the smaller version of 6T40. Tech B states that 6T50 is the smaller version of 6T40. Who is correct?

Accepted Answer

A)  Tech A 
B)  Tech B 
C)  Both A and B 
D)  Neither A nor B 
A)  Tech A 
B)  Tech B 
C)  Both A and B 
D)  Neither A nor B

Question 14

Choose the correct statement with respect to shift solenoid E.

Accepted Answer

A)  It is a variable-force solenoid. 
B)  It will change which shuttle valve will receive fluid pressure from shift solenoid D 
C)  When solenoid E is energized, it will allow fluid to be supplied to the overdrive clutch. 
D)  When it is deenergized, fluid will flow to the low/reverse clutch. 
A)  It is a variable-force solenoid. 
B)  It will change which shuttle valve will receive fluid pressure from shift solenoid D 
C)  When solenoid E is energized, it will allow fluid to be supplied to the overdrive clutch. 
D)  When it is deenergized, fluid will flow to the low/reverse clutch.

Question 15

Which of the following components needs to be removed from the 6T40 transmission before the fluid baffle?

Accepted Answer

A)  Differential planetary sun gear 
B)  The input shaft, drive socket, and input shaft shell thrust bearing 
C)  Drive and driven sockets, along with the drive chain 
D)  All of these need to be removed. 
A)  Differential planetary sun gear 
B)  The input shaft, drive socket, and input shaft shell thrust bearing 
C)  Drive and driven sockets, along with the drive chain 
D)  All of these need to be removed.

Question 16

Technician A says that the Ford transmission fluid level can be inspected with a dipstick. Technician B says that the GM transmission can also be inspected with a dipstick. Who is correct?

Accepted Answer

A)  Technician A 
B)  Technician B 
C)  Both technicians 
D)  Neither technician 
A)  Technician A 
B)  Technician B 
C)  Both technicians 
D)  Neither technician

Question 17

Tech A states that the 6T40 transmission utilizes a temperature-sensitive fluid level control valve. Tech B states the 6T40 transmission utilizes a solenoid actuated control valve. Who is correct?

Accepted Answer

A)  Tech A 
B)  Tech B 
C)  Both A and B 
D)  Neither A nor B 
A)  Tech A 
B)  Tech B 
C)  Both A and B 
D)  Neither A nor B

Question 18

Disassembly of a GM 6T40 transmission is being discussed. Technician A says that all the bolts that retain the valve body and the solenoids to the case are the same length. Technician B says that all the bolts that hold the valve body and solenoids to the case are different lengths and their locations should be noted. Who is correct?

Accepted Answer

A)  Technician A 
B)  Technician B 
C)  Both Technicians A and B 
D)  Neither Technician A nor B 
A)  Technician A 
B)  Technician B 
C)  Both Technicians A and B 
D)  Neither Technician A nor B

Question 19

Choose the correct statement with respect to shift solenoid

Accepted Answer

A)  It is a variable-force solenoid. 
B)  It will change which shuttle valve will receive fluid pressure from shift solenoid 
C)  When solenoid E is energized, it will allow fluid to be supplied to the overdrive clutch. 
D)  When it is deenergized, fluid will flow to the low/reverse clutch. 
A)  It is a variable-force solenoid. 
B)  It will change which shuttle valve will receive fluid pressure from shift solenoid 
C)  When solenoid E is energized, it will allow fluid to be supplied to the overdrive clutch. 
D)  When it is deenergized, fluid will flow to the low/reverse clutch.

Question 20

A vehicle with a 6F35 transmission comes in with a transmission leak. After the leak is repaired, the fluid level needs to be checked. Tech A states that the fluid temperature must be below 140˚ F (60˚ C) or the level will be incorrect. Tech B states that the transmission will use Mercon V fluid. Who is correct?

Accepted Answer

A)  Tech A 
B)  Tech B 
C)  Both A and B 
D)  Neither A nor B 
A)  Tech A 
B)  Tech B 
C)  Both A and B 
D)  Neither A nor B

Exam 25: 6t40 6f35 Transmission

Identify the type of transmission fluid used by Ford 6F35 transmission.

Which of the following statements is NOT true regarding the 6T40 transmission?

Technician A says that when a solenoid is faulty, the entire solenoid pack must be replaced. Technician B says when replacing the solenoid pack, a unique identification code must be programmed into the vehicle's PCM. Who is correct? ​

While rebuilding a 6T40 transmission, you test the solenoids in the valve body. Solenoids A and E both measure 20 ohms. The remaining solenoids measure 4.5 ohms. Tech A states that solenoids A and E need to be replaced. Tech B states that only solenoid A needs to be replaced. Who is correct?

Technician A says that the 6T40 GM transmission uses DEXRON VI transmission fluid . Technician B says that the 6T40 GM transmission uses DEXRON IIE transmission fluid . Who is correct?

A vehicle comes into the shop with a 6F35 transmission that has no reverse or 1st gear. Tech A states that the problem could be a bad solenoid C. Who is correct?

Transmission fluid must be drained when its temperature is:

Technician A says that the shift solenoids A, B, C, and D are on and off solenoids. Technician B says that shift solenoid E is the only variable-force solenoid. Who is correct?

For how long should all frictions be soaked in (the specified) automatic transmission fluid before being installed into the transmission?

Identify the component of 6T40 transmission shown in the given figure.

Tech A sates that 6T30 is the smaller version of 6T40. Tech B states that 6T50 is the smaller version of 6T40. Who is correct?

Choose the correct statement with respect to shift solenoid E.

Which of the following components needs to be removed from the 6T40 transmission before the fluid baffle?

Technician A says that the Ford transmission fluid level can be inspected with a dipstick. Technician B says that the GM transmission can also be inspected with a dipstick. Who is correct?

Tech A states that the 6T40 transmission utilizes a temperature-sensitive fluid level control valve. Tech B states the 6T40 transmission utilizes a solenoid actuated control valve. Who is correct?

Choose the correct statement with respect to shift solenoid

Strategy-Based Diagnostics

Safety

Basic Tools and Precision Measuring

Fasteners and Thread Repair

Vehicle, Customer, and Service Information

Automatic Transmission Fundamentals

Transmission Components

Hydraulic Fundamentals

Torque Converter Principles

Hydraulically Controlled Transmission

Electronically Controlled Transmission

In-Vehicle Transmission Repairs

Transmission Removal

Transmission Disassembly

Hydraulic System Rebuilding

Gear Train Rebuilding

Valve Body and Electric Service

Transmission Reassembly

Transmission Reinstallation

Dual Clutch Transmissions

Continuously Variable Transmissions

Hybrid Transmissions

Honda Transmissions

Chrysler 6 Speed 62te Transmission

Zf 9hp Chrysler 948te Transmission

Ford 6r60 Zf6hp26

Allison 1000 and 2000 Series Transmissions

Filters

Technician A says that when a solenoid is faulty, the entire solenoid pack must be replaced. Technician B says when replacing the solenoid pack, a unique identification code must be programmed into the vehicle's PCM. Who is correct?