Question 1

Choose the correct statement with respect to solenoids.

Accepted Answer

A)  The valve body contains three trim solenoids. 
B)  The shift solenoids are normally open when they are deenergized. 
C)  The shift solenoids are pulse width modulated. 
D)  The shift solenoids do not directly act on the transmission clutches. Rather they move valves in the valve body. 
A)  The valve body contains three trim solenoids. 
B)  The shift solenoids are normally open when they are deenergized. 
C)  The shift solenoids are pulse width modulated. 
D)  The shift solenoids do not directly act on the transmission clutches. Rather they move valves in the valve body.

Question 2

Two technicians are discussing transmission service on an Allison transmission. Tech A states that the internal filter should be changed every fluid service. Tech B states that the external filter is only changed during the first service. Who is correct?

Accepted Answer

A)  Tech A 
B)  Tech B 
C)  Both A and B 
D)  Neither A nor B 
A)  Tech A 
B)  Tech B 
C)  Both A and B 
D)  Neither A nor B

Question 3

Tech A states that Allison transmissions use two trim solenoids to control pressure. Tech B states that the transmission uses two pressure control solenoids. Who is correct?

Accepted Answer

A)  Tech A 
B)  Tech B 
C)  Both A and B 
D)  Neither A nor B 
A)  Tech A 
B)  Tech B 
C)  Both A and B 
D)  Neither A nor B

Question 4

A vehicle with an Allison transmission comes in to the shop with poor acceleration and no reverse. You test drive the vehicle and determine that there is no 1st or reverse gear. Tech A states that the problem could be a bad C3 clutch. Tech B states that the problem could be a bad C5 clutch.
Who is correct?

Accepted Answer

A)  Tech A 
B)  Tech B 
C)  Both A and B 
D)  Neither A nor B 
A)  Tech A 
B)  Tech B 
C)  Both A and B 
D)  Neither A nor B

Question 5

The internal filter needs to be changed:

Accepted Answer

A)  whenever the external filter is changed. 
B)  during every service. 
C)  during every alternate transmission service. 
D)  during the first transmission service. 
A)  whenever the external filter is changed. 
B)  during every service. 
C)  during every alternate transmission service. 
D)  during the first transmission service.

Question 6

The torque converter clutch solenoid of an Allison transmission operates on a frequency of ________

Accepted Answer

A)  100 Hertz 
B)  350 Hertz 
C)  250 Hertz 
D)  400 Hertz 
A)  100 Hertz 
B)  350 Hertz 
C)  250 Hertz 
D)  400 Hertz

Question 7

Tech A states that the two trim solenoids on an Allison transmission are both normally closed. Tech B states that one trim solenoid is normally open, while the other is normally closed. Who is correct?

Accepted Answer

A)  Tech A 
B)  Tech B 
C)  Both A and B 
D)  Neither A nor B 
A)  Tech A 
B)  Tech B 
C)  Both A and B 
D)  Neither A nor B

Question 8

You test the line pressure on an Allison transmission and find that the pressure is only 90 psi (621 kPa) in all gears. Tech A states that solenoid A could be in fail safe. Tech B states that solenoid B may not be energized. Who is correct?

Accepted Answer

A)  Tech A 
B)  Tech B 
C)  Both A and B 
D)  Neither A nor B 
A)  Tech A 
B)  Tech B 
C)  Both A and B 
D)  Neither A nor B

Question 9

What is the resistance value of trim A solenoid?

Accepted Answer

A)  8.5-15 ohms 
B)  20-30 ohms 
C)  5.5-8.0 ohms 
D)  40-50 ohms 
A)  8.5-15 ohms 
B)  20-30 ohms 
C)  5.5-8.0 ohms 
D)  40-50 ohms

Question 10

Tech A states that the shift solenoids in an Allison transmission are pulse width modulated to control the shift feel. Tech B states that the trim solenoids are proportional current solenoids. Who is correct?

Accepted Answer

A)  Tech A 
B)  Tech B 
C)  Both A and B 
D)  Neither A nor B 
A)  Tech A 
B)  Tech B 
C)  Both A and B 
D)  Neither A nor B

Question 11

Technician A says that the diesel engine equipped Allison 1000 transmission uses an engine speed sensor. Technician B says the engine speed sensor is not used on gasoline powered engines. Who is correct?

Accepted Answer

A)  Technician A 
B)  Technician B 
C)  Both technicians 
D)  Neither technician 
A)  Technician A 
B)  Technician B 
C)  Both technicians 
D)  Neither technician

Question 12

The output pressure of trim solenoid A of an Allison transmission is at 0 psi. Tech A states that the solenoid could be in failsafe mode. Tech B states that solenoid may have full current. Who is correct?

Accepted Answer

A)  Tech A 
B)  Tech B 
C)  Both A and B 
D)  Neither A nor B 
A)  Tech A 
B)  Tech B 
C)  Both A and B 
D)  Neither A nor B

Question 13

The trim solenoids were renamed pressure control solenoids after a few years.

Accepted Answer

A) True 
 B)False

Question 14

How many return springs are located behind the C4 clutch apply plate of an Allison 1000/2000 transmission?

Accepted Answer

A)  2 
B)  3 
C)  4 
D)  5 
A)  2 
B)  3 
C)  4 
D)  5

Question 15

How many sealing rings need to be replaced on the back of an Allison transmission pump?

Accepted Answer

A)  2 
B)  3 
C)  4 
D)  6 
A)  2 
B)  3 
C)  4 
D)  6

Question 16

Tech A states that the two trim solenoids on an Allison transmission are both normally closed. Tech B states that one trim solenoid is normally open, while the other is normally closed. Who is correct?

Accepted Answer

A)  Tech A 
B)  Tech B 
C)  Both A and B 
D)  Neither A nor B 
A)  Tech A 
B)  Tech B 
C)  Both A and B 
D)  Neither A nor B

Question 17

Technician A says that the Allison 1000 transmission contains four shift solenoids. Technician B says that the Allison 1000 contains two trim solenoids. Who is correct?

Accepted Answer

A)  Technician A 
B)  Technician B 
C)  Both technicians 
D)  Neither technician 
A)  Technician A 
B)  Technician B 
C)  Both technicians 
D)  Neither technician

Question 18

What is the resistance value of trim A solenoid?

Accepted Answer

A)  8.5-15 ohms 
B)  20-30 ohms 
C)  5.5-8.0 ohms 
D)  40-50 ohms 
A)  8.5-15 ohms 
B)  20-30 ohms 
C)  5.5-8.0 ohms 
D)  40-50 ohms

Question 19

Tech A states that the solenoids of an Allison transmission use pulse width modulation. Tech B states that the solenoids do not use pulse width modulation. Who is correct?

Accepted Answer

A)  Tech A 
B)  Tech B 
C)  Both A and B 
D)  Neither A nor B 
A)  Tech A 
B)  Tech B 
C)  Both A and B 
D)  Neither A nor B

Question 20

Technician A says that the Allison 1000 transmission contains four shift solenoids. Technician B says that the Allison 1000 contains two trim solenoids. Who is correct?

Accepted Answer

A)  Technician A 
B)  Technician B 
C)  Both technicians 
D)  Neither technician 
A)  Technician A 
B)  Technician B 
C)  Both technicians 
D)  Neither technician

Exam 28: Allison 1000 and 2000 Series Transmissions

Choose the correct statement with respect to solenoids.

Two technicians are discussing transmission service on an Allison transmission. Tech A states that the internal filter should be changed every fluid service. Tech B states that the external filter is only changed during the first service. Who is correct?

Tech A states that Allison transmissions use two trim solenoids to control pressure. Tech B states that the transmission uses two pressure control solenoids. Who is correct?

The internal filter needs to be changed:

The torque converter clutch solenoid of an Allison transmission operates on a frequency of ________

Tech A states that the two trim solenoids on an Allison transmission are both normally closed. Tech B states that one trim solenoid is normally open, while the other is normally closed. Who is correct?

You test the line pressure on an Allison transmission and find that the pressure is only 90 psi (621 kPa) in all gears. Tech A states that solenoid A could be in fail safe. Tech B states that solenoid B may not be energized. Who is correct?

What is the resistance value of trim A solenoid?

Tech A states that the shift solenoids in an Allison transmission are pulse width modulated to control the shift feel. Tech B states that the trim solenoids are proportional current solenoids. Who is correct?

Technician A says that the diesel engine equipped Allison 1000 transmission uses an engine speed sensor. Technician B says the engine speed sensor is not used on gasoline powered engines. Who is correct?

The output pressure of trim solenoid A of an Allison transmission is at 0 psi. Tech A states that the solenoid could be in failsafe mode. Tech B states that solenoid may have full current. Who is correct?

The trim solenoids were renamed pressure control solenoids after a few years.

How many return springs are located behind the C4 clutch apply plate of an Allison 1000/2000 transmission?

How many sealing rings need to be replaced on the back of an Allison transmission pump?

Tech A states that the two trim solenoids on an Allison transmission are both normally closed. Tech B states that one trim solenoid is normally open, while the other is normally closed. Who is correct?

Technician A says that the Allison 1000 transmission contains four shift solenoids. Technician B says that the Allison 1000 contains two trim solenoids. Who is correct?

What is the resistance value of trim A solenoid?

Tech A states that the solenoids of an Allison transmission use pulse width modulation. Tech B states that the solenoids do not use pulse width modulation. Who is correct?

Technician A says that the Allison 1000 transmission contains four shift solenoids. Technician B says that the Allison 1000 contains two trim solenoids. Who is correct?

Strategy-Based Diagnostics

Safety

Basic Tools and Precision Measuring

Fasteners and Thread Repair

Vehicle, Customer, and Service Information

Automatic Transmission Fundamentals

Transmission Components

Hydraulic Fundamentals

Torque Converter Principles

Hydraulically Controlled Transmission

Electronically Controlled Transmission

In-Vehicle Transmission Repairs

Transmission Removal

Transmission Disassembly

Hydraulic System Rebuilding

Gear Train Rebuilding

Valve Body and Electric Service

Transmission Reassembly

Transmission Reinstallation

Dual Clutch Transmissions

Continuously Variable Transmissions

Hybrid Transmissions

Honda Transmissions

Chrysler 6 Speed 62te Transmission

6t40 6f35 Transmission

Zf 9hp Chrysler 948te Transmission

Ford 6r60 Zf6hp26

Filters