Question 1

One of the metrics commonly used in Lean Six Sigma is DPU. This acronym stands for ___________________.

Accepted Answer

A)  Deferred planned usage 
B)  Defects per unit 
C)  Decreased production utilization 
D)  Downtime per unit 
A)  Deferred planned usage 
B)  Defects per unit 
C)  Decreased production utilization 
D)  Downtime per unit

Question 2

If the data displayed in a Histogram displays two peaks the distribution would likely be _____________.

Accepted Answer

A)  Transformed 
B)  Multi-skewed 
C)  Bi-attribute 
D)  Bimodal 
A)  Transformed 
B)  Multi-skewed 
C)  Bi-attribute 
D)  Bimodal

Question 3

The Accuracy of a Measurement System addresses _________________.

Accepted Answer

A)  Stability, Bias & Linearity 
B)  Repeatability & Reproducibility 
C)  Stability & Sensitivity 
D)  Precision & Sensitivity 
A)  Stability, Bias & Linearity 
B)  Repeatability & Reproducibility 
C)  Stability & Sensitivity 
D)  Precision & Sensitivity

Question 4

For a Normal Distribution the Mean, Median and Mode are the same data point.

Accepted Answer

A) True 
 B)False

Question 5

The proper functioning of a Visual Factory is dependent upon which of these?

Accepted Answer

A)  Technically skilled workers 
B)  Work space with active 5S 
C)  Availability of visual tools 
D)  Breakthrough projects 
A)  Technically skilled workers 
B)  Work space with active 5S 
C)  Availability of visual tools 
D)  Breakthrough projects

Question 6

A Lean Principle that addresses efficiency by the process worker is called ____________________?

Accepted Answer

A)  Visual Factory 
B)  Supervising 
C)  Training 
D)  Standardizing 
A)  Visual Factory 
B)  Supervising 
C)  Training 
D)  Standardizing

Question 7

Standardized work instructions apply to which resource in the process of interest?

Accepted Answer

A)  People 
B)  Machines 
C)  Supervision 
D)  Engineering 
A)  People 
B)  Machines 
C)  Supervision 
D)  Engineering

Question 8

The Lean Principle action in the 5S approach that deals with having those items needed regularly at hand and those items need less regularly stored out of the way is known as ___________.

Accepted Answer

A)  Shining 
B)  Standardizing 
C)  Sustaining 
D)  Sorting 
A)  Shining 
B)  Standardizing 
C)  Sustaining 
D)  Sorting

Question 9

Which statement(s) are true about the Fitted Line Plot shown here? (Note: There are 2 correct answers).

Accepted Answer

A)  When Reactant increases, the Energy Consumed increases. 
B)  The slope of the equation is a positive 130.5. 
C)  The predicted output Y is close to -18 when the Reactant level is set to 6. 
D)  Over 85 % of the variation of the Energy Consumed is explained by the Reactant via this Linear Regression. 
A)  When Reactant increases, the Energy Consumed increases. 
B)  The slope of the equation is a positive 130.5. 
C)  The predicted output Y is close to -18 when the Reactant level is set to 6. 
D)  Over 85 % of the variation of the Energy Consumed is explained by the Reactant via this Linear Regression.

Question 10

Having an Alpha of .05 and a Beta of .10 are the most common risk levels when running a Statistical test.

Accepted Answer

A) True 
 B)False

Question 11

The reason(s) for not marking the customer Specification Limits (SL) on a Control Chart is which of these? (Note: There are 4 correct answers).

Accepted Answer

A)  Process control teams should not control a process based on SLs 
B)  Displaying the SLs on a Control Chart sends a wrong signal toward process control 
C)  Marking the SLs on a Control Chart is against the principle of charting 
D)  By marking the SLs, one can confuse the operator as to what limits are critical 
E)  By using mere Control Limits the process only needs to be in Statistical Control 
A)  Process control teams should not control a process based on SLs 
B)  Displaying the SLs on a Control Chart sends a wrong signal toward process control 
C)  Marking the SLs on a Control Chart is against the principle of charting 
D)  By marking the SLs, one can confuse the operator as to what limits are critical 
E)  By using mere Control Limits the process only needs to be in Statistical Control

Question 12

This output is what type of advanced Capability Analysis?

Accepted Answer

A)  Continuous 
B)  Binomial 
C)  Poisson 
D)  Discreet 
E)  DPU 
A)  Continuous 
B)  Binomial 
C)  Poisson 
D)  Discreet 
E)  DPU

Question 13

A primary benefit of using a Multi-Vari Chart is it provides a visual presentation of two-way interactions.

Accepted Answer

A) True 
 B)False

Question 14

The following Business Case is constructed properly. "In business unit A there are too many flashlight returns and flashlight sales have decreased by 25 percent."

Accepted Answer

A) True 
 B)False

Question 15

Which element of waste best describes "the cost of an idle resource"?

Accepted Answer

A)  Waiting 
B)  Motion 
C)  Inventory 
D)  Correction 
A)  Waiting 
B)  Motion 
C)  Inventory 
D)  Correction

Question 16

Which of these statements describe an undesirable situation when implementing SPC? (Note: There are 2 correct answers).

Accepted Answer

A)  The lower Control Limit for the R chart is equal to zero 
B)  The Control Limits are wider than the customer specification limits 
C)  A process is in Statistical Control before implementation of SPC 
D)  Attempt to use SPC for tracking transaction times at a warehouse 
E)  Indication of the specification limits on the Control Chart 
A)  The lower Control Limit for the R chart is equal to zero 
B)  The Control Limits are wider than the customer specification limits 
C)  A process is in Statistical Control before implementation of SPC 
D)  Attempt to use SPC for tracking transaction times at a warehouse 
E)  Indication of the specification limits on the Control Chart

Question 17

Conducting a viable Capability Analysis using Attribute Data one must obtain a fairly large sample set to be statistically sound.

Accepted Answer

A) True 
 B)False

Question 18

Those who are trained to the skill levels of a Black Belt are typically utilized to apply Lean Six Sigma methodologies what percentage of their time?

Accepted Answer

A)  25% 
B)  50% 
C)  75% 
D)  100% 
A)  25% 
B)  50% 
C)  75% 
D)  100%

Question 19

The Empirical Rule is important because it provides an estimate of the probability of an event occurring depending on the Standard Deviation from the Mean.

Accepted Answer

A) True 
 B)False

Question 20

The generation of a Regression Equation is justified when we _____________.  (Note: There are 4 correct answers).

Accepted Answer

A)  Expect the relationship to be Linear between the output and inputs 
B)  Know that there is a non-linear relationship between output and input(s) 
C)  Need to understand how to control a process output by controlling the input(s) 
D)  Experience several process defects and have no other way to fix hem 
E)  When it is very expensive or too late to measure the output 
A)  Expect the relationship to be Linear between the output and inputs 
B)  Know that there is a non-linear relationship between output and input(s) 
C)  Need to understand how to control a process output by controlling the input(s) 
D)  Experience several process defects and have no other way to fix hem 
E)  When it is very expensive or too late to measure the output

One of the metrics commonly used in Lean Six Sigma is DPU. This acronym stands for ___________________.

If the data displayed in a Histogram displays two peaks the distribution would likely be _____________.

The Accuracy of a Measurement System addresses _________________.

For a Normal Distribution the Mean, Median and Mode are the same data point.

The proper functioning of a Visual Factory is dependent upon which of these?

A Lean Principle that addresses efficiency by the process worker is called ____________________?

Standardized work instructions apply to which resource in the process of interest?

The Lean Principle action in the 5S approach that deals with having those items needed regularly at hand and those items need less regularly stored out of the way is known as ___________.

Which statement(s) are true about the Fitted Line Plot shown here? (Note: There are 2 correct answers).

Having an Alpha of .05 and a Beta of .10 are the most common risk levels when running a Statistical test.

The reason(s) for not marking the customer Specification Limits (SL) on a Control Chart is which of these? (Note: There are 4 correct answers).

This output is what type of advanced Capability Analysis?

A primary benefit of using a Multi-Vari Chart is it provides a visual presentation of two-way interactions.

The following Business Case is constructed properly. "In business unit A there are too many flashlight returns and flashlight sales have decreased by 25 percent."

Which element of waste best describes "the cost of an idle resource"?

Which of these statements describe an undesirable situation when implementing SPC? (Note: There are 2 correct answers).

Conducting a viable Capability Analysis using Attribute Data one must obtain a fairly large sample set to be statistically sound.

Those who are trained to the skill levels of a Black Belt are typically utilized to apply Lean Six Sigma methodologies what percentage of their time?

The Empirical Rule is important because it provides an estimate of the probability of an event occurring depending on the Standard Deviation from the Mean.

The generation of a Regression Equation is justified when we _____________. (Note: There are 4 correct answers).

Certified Manager of Quality/Organizational Excellence

Certified Quality Auditor

Certified Quality Engineer

Certified Quality Improvement Associate

Certified Six Sigma Black Belt

Filters

Exam 6: Six Sigma Green Belt

One of the metrics commonly used in Lean Six Sigma is DPU. This acronym stands for ___________________.

If the data displayed in a Histogram displays two peaks the distribution would likely be _____________.

The Accuracy of a Measurement System addresses _________________.

For a Normal Distribution the Mean, Median and Mode are the same data point.

The proper functioning of a Visual Factory is dependent upon which of these?

A Lean Principle that addresses efficiency by the process worker is called ____________________?

Standardized work instructions apply to which resource in the process of interest?

The Lean Principle action in the 5S approach that deals with having those items needed regularly at hand and those items need less regularly stored out of the way is known as ___________.

Which statement(s) are true about the Fitted Line Plot shown here? (Note: There are 2 correct answers).

Having an Alpha of .05 and a Beta of .10 are the most common risk levels when running a Statistical test.

The reason(s) for not marking the customer Specification Limits (SL) on a Control Chart is which of these? (Note: There are 4 correct answers).

This output is what type of advanced Capability Analysis?

A primary benefit of using a Multi-Vari Chart is it provides a visual presentation of two-way interactions.

The following Business Case is constructed properly. "In business unit A there are too many flashlight returns and flashlight sales have decreased by 25 percent."

Which element of waste best describes "the cost of an idle resource"?

Which of these statements describe an undesirable situation when implementing SPC? (Note: There are 2 correct answers).

Conducting a viable Capability Analysis using Attribute Data one must obtain a fairly large sample set to be statistically sound.

Those who are trained to the skill levels of a Black Belt are typically utilized to apply Lean Six Sigma methodologies what percentage of their time?

The Empirical Rule is important because it provides an estimate of the probability of an event occurring depending on the Standard Deviation from the Mean.

The generation of a Regression Equation is justified when we _____________. (Note: There are 4 correct answers).

Certified Manager of Quality/Organizational Excellence

Certified Quality Auditor

Certified Quality Engineer

Certified Quality Improvement Associate

Certified Six Sigma Black Belt

Filters