Exam 18: Interior Finish

Flooring is blind nailed by driving nails at about a ____-degree angle through the flooring.

One head of the heavy hammer used with a power nailer is ____ and the other is steel.

____ are L-shaped pieces that are fastened to the wall to support the other components of the ceiling system.

____ grades of pecan flooring contain all heartwood.

Door ______ are moldings applied around the door opening.

Prefinished strip flooring should be sanded after installation.

____ flooring is installed like strip flooring.

Muntins are window grills and are often removable.

A piece of 1 * 4 or 1 * 6 stock called a ____ is installed around the walls of a closet to support the shelf and the rod.

S4S is the abbreviation for "____ four sides."

____ are used to decorate fireplaces and to cover the joint between the fireplace and the wall.

Molding usually comes in lengths of 8, 10, 12, 14, and ____ feet.

For each interior door opening, ____ side casings and two head casings are required.

On the same window, aprons should have the same molded shape as casings.

A scaled sketch of a suspended ceiling grid should indicate the direction and location of the main runners, cross tees, light panels, and ____.

Interior window trim consists of the stool, apron, jamb extensions, and casings.

Designated by location, base, base shoe, and ____ are moldings applied at the bottom of walls where they meet the floor.

Coped joints are performed on outside miters.

A ____ box is a tool that cuts material at an angle.

Oak flooring is available ____-sawed and plain-sawed.