Exam 2: Hand Power Tools

The guard of a circular saw should never be retracted by hand.

____ are used extensively for fastening gypsum board to walls and ceilings with screws.

With a long blade, the _____ can be used to cut flush with a floor or along the side of a stud.

For boring holes in rough work, the speed bore or _____ is commonly used.

When loosing the bolt holding a circular saw blade, it should be rotated opposite to the normal rotation of the blade.

____-actuated drivers are used to drive specially designed pins into masonry or steel.

A chamfer is a small bevel on the edge of stock.

The material removed when cutting with saw blades creates a space called the __________.

The size of a portable electric circular saw is determined by the diameter of the blade.

The portable ____ sander is used frequently for sanding cabinetwork and interior finish.

The heavy-duty ____ drives smooth-shank, headed nails up to 3 1 / 4 inches, ring-shank nails up to 2 3 / 8 inches, and screw shank nails up to 3 inches.

Pneumatic staplers and nailers are commonly called ____.

The ____ saw, sometimes called a Sawzall, is used primarily for roughing in work.

A light-duty specialized type of router is called a ____ trimmer.

Blades for a Sawzall are available for cutting many materials, including _____ .

Cordless circular saws cannot cut dimension lumber.

__________ cutting is done by rotating a tool base so the spinning blade cuts into the material.

Hammer drills are best suited drilling into wood.

Faster speeds are used for drilling smaller holes and driving fasteners.

Portable power planes have an adjustable ____ that allows planing square, beveled edges to 45 degrees, or chamfers.