Question 1

The goals of first aid are to make the immediate environment as safe as possible, preserve the life of the patient, prevent the injury from worsening, prevent additional injuries from occurring, protect the unconscious, promote recovery, comfort the injured, prevent any delay in treatment, and provide the best possible care for the injured person.

Accepted Answer

A) True 
 B)False

Question 2

You should wait to carry out housekeeping tasks once the job you are doing is completed, rather than while you are working.

Accepted Answer

A) True 
 B)False

Question 3

An ATSG manual is available in print or download.

Accepted Answer

A) True 
 B)False

Question 4

To identify the correct part, the technician will need to know _______.

Accepted Answer

A)  Where on the vehicle the part is installed 
B)  What system or subsystem it comes from 
C)  Vehicle identification information 
D)  All of the above

Question 5

Class A fires involve electrical equipment.

Accepted Answer

A) True 
 B)False

Question 6

To have a safe attitude when working in the automotive shop, think ahead about what you are doing, and put in place specific measures to protect yourself and those around you.

Accepted Answer

A) True 
 B)False

Question 7

_______ is the maximum allowable concentration of a given material in the surrounding air.

Accepted Answer

A)  Toxic dust 
B)  Threshold limit value (TLV) 
C)  Both A and B 
D)  None of the above

Question 8

Technician A says that dust masks should be used when painting. Technician B says that a respirator should be used when chemicals are present in the atmosphere. Who is correct?

Accepted Answer

A)  Technician A 
B)  Technician B 
C)  Both A and B 
D)  Neither A nor B

Question 9

To operate a fire extinguisher, follow the acronym for fire extinguisher use:

Accepted Answer

A)  CLASS 
B)  PUSH 
C)  PULL 
D)  PASS

Question 10

A ring or watch could _______.

Accepted Answer

A)  Inadvertently short out an electrical circuit 
B)  Heat up quickly and severely burn you 
C)  Cause a spark that might make the battery explode 
D)  All of the above

Question 11

The ________ is a federal government agency that deals with issues related to environmental safety.

Accepted Answer

A)  OSHA 
B)  EPA 
C)  PPE 
D)  None of the above

Question 12

Technician A says that one should always be careful not to mix incompatible liquids to ensure reduced effort. Technician B says that one should always be careful not to mix incompatible liquids to ensure low cost of disposal. Who is correct?

Accepted Answer

A)  Technician A 
B)  Technician B 
C)  Both A and B 
D)  Neither A nor B

Question 13

Technician A states that for a respiratory mask to be completely effective, it must cover your ears and nose completely. Technician B states that the kind of filter used in the respiratory mask depends on the chemical present in the atmosphere. Who is correct?

Accepted Answer

A)  Technician A 
B)  Technician B 
C)  Both A and B 
D)  Neither A nor B

Question 14

Technician A says that ATSG manuals cover the operation, diagnosis, and repair of a specific transmission. Technician B says that these manuals also include a "known problem" section with procedures to correct those problems. Who is correct?

Accepted Answer

A)  Technician A 
B)  Technician B 
C)  Both technicians 
D)  Neither technician

Question 15

Which of the following is a source of toxic dust from a vehicle?

Accepted Answer

A)  Drum brakes 
B)  Manual transmission bell housings 
C)  Both A and B 
D)  None of the above

Question 16

All head protection is designed specifically with additional padding on the top to provide extra protection against bumps.

Accepted Answer

A) True 
 B)False

Question 17

Protective breathing devices are being discussed. Technician A states that a person should use a disposable dust mask when grinding off rust or when working is dusty conditions. Technician B states that a person should use a respirator when painting. Who is correct?

Accepted Answer

A)  Technician A 
B)  Technician B 
C)  Both A and B 
D)  Neither A nor B

Question 18

A _______ is any material that poses an unreasonable risk of damage or injury to persons, property, or the environment if not properly controlled during handling.

Accepted Answer

A)  Hazardous material 
B)  Safety data sheet (SDS) 
C)  Both A and B 
D)  None of the above

Question 19

To operate a fire extinguisher, follow the acronym for fire extinguisher use: PASS, which stands for:

Accepted Answer

A)  Press, aim, squeeze, sweep. 
B)  Pull, aim, shake, sweep. 
C)  Press, aim, shake, sweep. 
D)  Pull, aim, squeeze, sweep.

Question 20

Technician A says heavy-duty and impenetrable chemical gloves should always be worn when using solvents and cleaners. Technician B says heavy-duty and impenetrable chemical gloves should be worn when working on batteries. Who is correct?

Accepted Answer

A)  Technician A 
B)  Technician B 
C)  Both A and B 
D)  Neither A nor B

Exam 2: Safety

You should wait to carry out housekeeping tasks once the job you are doing is completed, rather than while you are working.

An ATSG manual is available in print or download.

To identify the correct part, the technician will need to know _______.

Class A fires involve electrical equipment.

To have a safe attitude when working in the automotive shop, think ahead about what you are doing, and put in place specific measures to protect yourself and those around you.

_______ is the maximum allowable concentration of a given material in the surrounding air.

Technician A says that dust masks should be used when painting. Technician B says that a respirator should be used when chemicals are present in the atmosphere. Who is correct?

To operate a fire extinguisher, follow the acronym for fire extinguisher use:

A ring or watch could _______.

The ________ is a federal government agency that deals with issues related to environmental safety.

Technician A says that one should always be careful not to mix incompatible liquids to ensure reduced effort. Technician B says that one should always be careful not to mix incompatible liquids to ensure low cost of disposal. Who is correct?

Technician A states that for a respiratory mask to be completely effective, it must cover your ears and nose completely. Technician B states that the kind of filter used in the respiratory mask depends on the chemical present in the atmosphere. Who is correct?

Technician A says that ATSG manuals cover the operation, diagnosis, and repair of a specific transmission. Technician B says that these manuals also include a "known problem" section with procedures to correct those problems. Who is correct?

Which of the following is a source of toxic dust from a vehicle?

All head protection is designed specifically with additional padding on the top to provide extra protection against bumps.

Protective breathing devices are being discussed. Technician A states that a person should use a disposable dust mask when grinding off rust or when working is dusty conditions. Technician B states that a person should use a respirator when painting. Who is correct?

A _______ is any material that poses an unreasonable risk of damage or injury to persons, property, or the environment if not properly controlled during handling.

To operate a fire extinguisher, follow the acronym for fire extinguisher use: PASS, which stands for:

Technician A says heavy-duty and impenetrable chemical gloves should always be worn when using solvents and cleaners. Technician B says heavy-duty and impenetrable chemical gloves should be worn when working on batteries. Who is correct?