Question 1

MATCHING
Match the following word or phrase with its correct meaning.
-Has the strength of steel and the approximate weight of aluminum

Accepted Answer

A) Gray Cast Iron 
B) White Cast Iron 
C) Chilled Cast Iron 
D) Steel 
E) Stainless Steel
F)Aluminum
G)Copper Alloy
H)Brass
I)Bronze
J)Titanium 
A) Gray Cast Iron 
B) White Cast Iron 
C) Chilled Cast Iron 
D) Steel 
E) Stainless Steel
F)Aluminum
G)Copper Alloy
H)Brass
I)Bronze
J)Titanium

Question 2

Name the material that uses additional forming of steel after initial hot rolling, and where the process is used to clean up hot-formed steel, provide a smooth, clean surface, ensure dimensional accuracy, and increase the tensile strength of the finished product.

Accepted Answer

Cold-rolle

Question 3

A ____ is a generally square or rectangular slightly raised surface projecting out from the body of a part.

Accepted Answer

A)  lug 
B)  pad 
C)  temper 
D)  both a and b 
E)  none of the above 
A)  lug 
B)  pad 
C)  temper 
D)  both a and b 
E)  none of the above

Question 4

Which of the following should be considered when designing a product?

Accepted Answer

A)  utilizing research and development 
B)  meeting a market demand 
C)  having good quality 
D)  the ability to be produced economically 
E)  all of the above 
A)  utilizing research and development 
B)  meeting a market demand 
C)  having good quality 
D)  the ability to be produced economically 
E)  all of the above

Question 5

Select a typical plastic product manufacturing process.

Accepted Answer

A)  injection molding 
B)  machining 
C)  thermoforming 
D)  both a and c 
A)  injection molding 
B)  machining 
C)  thermoforming 
D)  both a and c

Question 6

Name the process used to make rubber products such as tires and other circular and cylindrical shapes, although other shapes are commonly produced. This process works by wrapping measured layers of the polymer around a steel roll in the form of the desired product.

Accepted Answer

The answer of Name the process used to make rubber...

Question 7

Name a process by which high-pressure hydraulic fluid is applied to ductile metals to form a specified shape

Accepted Answer

The answer of Name a process by which high-pressure hydraulic...

Question 8

Define jigs.

Accepted Answer

Jigs are either fixed or movin

Question 9

Many companies most often use the abrasive saw.

Accepted Answer

A) True 
 B)False

Question 10

Describe the common characteristics of several methods of checking material hardness.

Accepted Answer

The techniques have common cha

Question 11

MATCHING
Match the following word or phrase with its correct meaning.
-A popular casting material for automotive cylinder blocks

Accepted Answer

A) Gray Cast Iron 
B) White Cast Iron 
C) Chilled Cast Iron 
D) Steel 
E) Stainless Steel
F)Aluminum
G)Copper Alloy
H)Brass
I)Bronze
J)Titanium 
A) Gray Cast Iron 
B) White Cast Iron 
C) Chilled Cast Iron 
D) Steel 
E) Stainless Steel
F)Aluminum
G)Copper Alloy
H)Brass
I)Bronze
J)Titanium

Question 12

MATCHING
Match the following word or phrase with its correct meaning.
-A widely used alloy of copper and zinc

Accepted Answer

A) Gray Cast Iron 
B) White Cast Iron 
C) Chilled Cast Iron 
D) Steel 
E) Stainless Steel
F)Aluminum
G)Copper Alloy
H)Brass
I)Bronze
J)Titanium 
A) Gray Cast Iron 
B) White Cast Iron 
C) Chilled Cast Iron 
D) Steel 
E) Stainless Steel
F)Aluminum
G)Copper Alloy
H)Brass
I)Bronze
J)Titanium

Question 13

The two general types of milling machines are ____ and ____.

Accepted Answer

A)  fine; coarse 
B)  permanent; portable 
C)  permanent; variable 
D)  horizontal; vertical 
E)  none of the above 
A)  fine; coarse 
B)  permanent; portable 
C)  permanent; variable 
D)  horizontal; vertical 
E)  none of the above

Question 14

The process of blow molding works by blowing hot polymer against the internal surfaces of a hollow mold.

Accepted Answer

A) True 
 B)False

Question 15

The material to be machined and an electrode are submerged in a dielectric fluid in a process called ____.

Accepted Answer

A)  electrochemical machining 
B)  electrodischarge machining 
C)  electron beam machining 
D)  ultrasonic machining 
E)  none of the above 
A)  electrochemical machining 
B)  electrodischarge machining 
C)  electron beam machining 
D)  ultrasonic machining 
E)  none of the above

Question 16

Gold is ____.

Accepted Answer

A)  a poor conductor of electricity 
B)  extremely malleable 
C)  corrosion resistant 
D)  both b and c 
E)  all of the above 
A)  a poor conductor of electricity 
B)  extremely malleable 
C)  corrosion resistant 
D)  both b and c 
E)  all of the above

Question 17

What else is tool design known as?

Accepted Answer

A)  CAD tool 
B)  jig and fixture design 
C)  form and function 
D)  none of the above 
A)  CAD tool 
B)  jig and fixture design 
C)  form and function 
D)  none of the above

Question 18

____ is a process of heating steel to a specified temperature and then allowing the material to cool slowly by air.

Accepted Answer

A)  Tempering 
B)  Annealing 
C)  Normalizing 
D)  Quenching 
E)  none of the above 
A)  Tempering 
B)  Annealing 
C)  Normalizing 
D)  Quenching 
E)  none of the above

Question 19

Cast iron is primarily an alloy of silicon and 1.7% to 4.5% of carbon.

Accepted Answer

A) True 
 B)False

Question 20

MATCHING
Match the following word or phrase with its correct meaning.
-An alloy of iron containing 0.8% to 1.5% carbon

Accepted Answer

A) Gray Cast Iron 
B) White Cast Iron 
C) Chilled Cast Iron 
D) Steel 
E) Stainless Steel
F)Aluminum
G)Copper Alloy
H)Brass
I)Bronze
J)Titanium 
A) Gray Cast Iron 
B) White Cast Iron 
C) Chilled Cast Iron 
D) Steel 
E) Stainless Steel
F)Aluminum
G)Copper Alloy
H)Brass
I)Bronze
J)Titanium

MATCHING Match the following word or phrase with its correct meaning. -Has the strength of steel and the approximate weight of aluminum

Name the material that uses additional forming of steel after initial hot rolling, and where the process is used to clean up hot-formed steel, provide a smooth, clean surface, ensure dimensional accuracy, and increase the tensile strength of the finished product.

A ____ is a generally square or rectangular slightly raised surface projecting out from the body of a part.

Which of the following should be considered when designing a product?

Select a typical plastic product manufacturing process.

Name the process used to make rubber products such as tires and other circular and cylindrical shapes, although other shapes are commonly produced. This process works by wrapping measured layers of the polymer around a steel roll in the form of the desired product.

Name a process by which high-pressure hydraulic fluid is applied to ductile metals to form a specified shape

Define jigs.

Many companies most often use the abrasive saw.

Describe the common characteristics of several methods of checking material hardness.

MATCHING Match the following word or phrase with its correct meaning. -A popular casting material for automotive cylinder blocks

MATCHING Match the following word or phrase with its correct meaning. -A widely used alloy of copper and zinc

The two general types of milling machines are and .

The process of blow molding works by blowing hot polymer against the internal surfaces of a hollow mold.

The material to be machined and an electrode are submerged in a dielectric fluid in a process called ____.

Gold is ____.

What else is tool design known as?

____ is a process of heating steel to a specified temperature and then allowing the material to cool slowly by air.

Cast iron is primarily an alloy of silicon and 1.7% to 4.5% of carbon.

MATCHING Match the following word or phrase with its correct meaning. -An alloy of iron containing 0.8% to 1.5% carbon

Introduction to Engineering and Manufacturing Technology Print Reading

Communicating with a Sketch

Scales and Precision Measurement

Reading Lines and Lettering on a Print

Reading Multiviews

Reading Auxiliary Views

Reading Dimensions

Reading Prints With Fasteners and Springs

Reading Sections, Revolutions, and Conventional Breaks

Reading Geometric Dimensioning and Tolerancing

Reading Linkage, Cam, Gear, and Bearing Prints

Reading Precision Sheet Metal Prints

Reading Prints of Working Drawings

Welding Processes and Reading Welding Representations

Reading Prints of Pictorial Drawings

Reading Electrical Diagrams and Schematics

Filters

Exam 7: Manufacturing Materials and Processes

MATCHING Match the following word or phrase with its correct meaning. -Has the strength of steel and the approximate weight of aluminum

Name the material that uses additional forming of steel after initial hot rolling, and where the process is used to clean up hot-formed steel, provide a smooth, clean surface, ensure dimensional accuracy, and increase the tensile strength of the finished product.

A ____ is a generally square or rectangular slightly raised surface projecting out from the body of a part.

Which of the following should be considered when designing a product?

Select a typical plastic product manufacturing process.

Name the process used to make rubber products such as tires and other circular and cylindrical shapes, although other shapes are commonly produced. This process works by wrapping measured layers of the polymer around a steel roll in the form of the desired product.

Name a process by which high-pressure hydraulic fluid is applied to ductile metals to form a specified shape

Define jigs.

Many companies most often use the abrasive saw.

Describe the common characteristics of several methods of checking material hardness.

MATCHING Match the following word or phrase with its correct meaning. -A popular casting material for automotive cylinder blocks

MATCHING Match the following word or phrase with its correct meaning. -A widely used alloy of copper and zinc

The two general types of milling machines are ____ and ____.

The process of blow molding works by blowing hot polymer against the internal surfaces of a hollow mold.

The material to be machined and an electrode are submerged in a dielectric fluid in a process called ____.

Gold is ____.

What else is tool design known as?

____ is a process of heating steel to a specified temperature and then allowing the material to cool slowly by air.

Cast iron is primarily an alloy of silicon and 1.7% to 4.5% of carbon.

MATCHING Match the following word or phrase with its correct meaning. -An alloy of iron containing 0.8% to 1.5% carbon

Introduction to Engineering and Manufacturing Technology Print Reading

Communicating with a Sketch

Scales and Precision Measurement

Reading Lines and Lettering on a Print

Reading Multiviews

Reading Auxiliary Views

Reading Dimensions

Reading Prints With Fasteners and Springs

Reading Sections, Revolutions, and Conventional Breaks

Reading Geometric Dimensioning and Tolerancing

Reading Linkage, Cam, Gear, and Bearing Prints

Reading Precision Sheet Metal Prints

Reading Prints of Working Drawings

Welding Processes and Reading Welding Representations

Reading Prints of Pictorial Drawings

Reading Electrical Diagrams and Schematics

Filters

The two general types of milling machines are and .