Question 1

Brass is a widely used alloy of ____.

Accepted Answer

A)  copper and zinc 
B)  copper and tin 
C)  phosphorous and bronze 
D)  copper and bronze 
E)  none of the above 
A)  copper and zinc 
B)  copper and tin 
C)  phosphorous and bronze 
D)  copper and bronze 
E)  none of the above

Question 2

Gray iron is a popular casting material for ____.

Accepted Answer

A)  automotive cylinder blocks 
B)  agricultural implements 
C)  cast iron pipe 
D)  machine tools 
E)  all of the above 
A)  automotive cylinder blocks 
B)  agricultural implements 
C)  cast iron pipe 
D)  machine tools 
E)  all of the above

Question 3

____ is the intended condition of the material surface after manufacturing processes have been implemented

Accepted Answer

A)  Smoothness 
B)  Surface texture 
C)  Finishing style 
D)  Machining 
E)  none of the above 
A)  Smoothness 
B)  Surface texture 
C)  Finishing style 
D)  Machining 
E)  none of the above

Question 4

Injection molding is the most common process for creating elastomer products.

Accepted Answer

A) True 
 B)False

Question 5

____ means the ability to be hammered or pressed into shape without breaking.

Accepted Answer

A)  Tensile 
B)  Ductile 
C)  Nodular 
D)  Malleable 
E)  none of the above 
A)  Tensile 
B)  Ductile 
C)  Nodular 
D)  Malleable 
E)  none of the above

Question 6

Nonferrous metals do not contain iron and have properties that are better suited for certain applications where steel may not be appropriate.

Accepted Answer

A) True 
 B)False

Question 7

Select which type of part the calendering process is used for.

Accepted Answer

A)  sheet products 
B)  plastic eyeglass lenses 
C)  hollow plastic parts 
D)  none of the above 
A)  sheet products 
B)  plastic eyeglass lenses 
C)  hollow plastic parts 
D)  none of the above

Question 8

Manufacturing composites are referred to as reinforced plastics.

Accepted Answer

A) True 
 B)False

Question 9

____ is a process of shaping malleable metals by hammering or pressing between dies that duplicate the desired shape.

Accepted Answer

A)  Adhesion 
B)  Fusion 
C)  Ductility 
D)  Forging 
E)  none of the above 
A)  Adhesion 
B)  Fusion 
C)  Ductility 
D)  Forging 
E)  none of the above

Question 10

Select a material that is combined with polymers to form very strong manufacturing composites.

Accepted Answer

A)  cotton 
B)  metal 
C)  graphite 
D)  all of the above 
A)  cotton 
B)  metal 
C)  graphite 
D)  all of the above

Question 11

Match the acronym with its correct meaning
-American National Standards Institute

Accepted Answer

A) ASME 
B) SAE 
C) AISI 
D) ANSI 
E) AWS
F)UNS
G)ASTM
H)SPC
I)CAE
J)CIM 
A) ASME 
B) SAE 
C) AISI 
D) ANSI 
E) AWS
F)UNS
G)ASTM
H)SPC
I)CAE
J)CIM

Question 12

What does R&D stand for?

Accepted Answer

Research a

Question 13

Which process is used to produce large containers such as tanks?

Accepted Answer

A)  solid phase forming process 
B)  thermoforming process 
C)  free-form fabrication of plastic 
D)  rotational molding process 
A)  solid phase forming process 
B)  thermoforming process 
C)  free-form fabrication of plastic 
D)  rotational molding process

Question 14

Name a person who specializes in machining.

Accepted Answer

The answer of Name a person who specializes in machining....

Question 15

Thermoplastics possess elastic qualities.

Accepted Answer

A) True 
 B)False

Question 16

Name a cutting tool that uses a high velocity stream of water combined with an abrasive substance to cut through various materials with compressed fluid at 60,000 pounds per square inch (psi) is forced through a very small orifice, which creates a thin stream of water traveling close to 600 miles per hour (mph)

Accepted Answer

The answer of Name a cutting tool that uses a...

Question 17

Typical parts made by a metal stamping process would be one of the following:

Accepted Answer

A)  cell phone body cases 
B)  automotive parts 
C)  artificial joints for humans 
D)  all of the above 
A)  cell phone body cases 
B)  automotive parts 
C)  artificial joints for humans 
D)  all of the above

Question 18

CADD designs can be quickly transformed into three-dimensional prototypes using different technologies. Which of the following is not one of these types of technology?

Accepted Answer

A)  rapid manufacturing 
B)  desktop manufacturing 
C)  solid freeform fabrication 
D)  conceptual modeling 
E)  none of the above 
A)  rapid manufacturing 
B)  desktop manufacturing 
C)  solid freeform fabrication 
D)  conceptual modeling 
E)  none of the above

Question 19

Name the material that is an alloy of iron containing 0.8% to 1.5% carbon.

Accepted Answer

The answer of Name the material that is an alloy...

Question 20

A riser is used, depending on the size of the casting, to allow the excess metal to evacuate from the mold.

Accepted Answer

A) True 
 B)False

Brass is a widely used alloy of ____.

Gray iron is a popular casting material for ____.

____ is the intended condition of the material surface after manufacturing processes have been implemented

Injection molding is the most common process for creating elastomer products.

____ means the ability to be hammered or pressed into shape without breaking.

Nonferrous metals do not contain iron and have properties that are better suited for certain applications where steel may not be appropriate.

Select which type of part the calendering process is used for.

Manufacturing composites are referred to as reinforced plastics.

____ is a process of shaping malleable metals by hammering or pressing between dies that duplicate the desired shape.

Select a material that is combined with polymers to form very strong manufacturing composites.

Match the acronym with its correct meaning -American National Standards Institute

What does R&D stand for?

Which process is used to produce large containers such as tanks?

Name a person who specializes in machining.

Thermoplastics possess elastic qualities.

Typical parts made by a metal stamping process would be one of the following:

CADD designs can be quickly transformed into three-dimensional prototypes using different technologies. Which of the following is not one of these types of technology?

Name the material that is an alloy of iron containing 0.8% to 1.5% carbon.

A riser is used, depending on the size of the casting, to allow the excess metal to evacuate from the mold.

Introduction to Engineering and Manufacturing Technology Print Reading

Communicating with a Sketch

Scales and Precision Measurement

Reading Lines and Lettering on a Print

Reading Multiviews

Reading Auxiliary Views

Reading Dimensions

Reading Prints With Fasteners and Springs

Reading Sections, Revolutions, and Conventional Breaks

Reading Geometric Dimensioning and Tolerancing

Reading Linkage, Cam, Gear, and Bearing Prints

Reading Precision Sheet Metal Prints

Reading Prints of Working Drawings

Welding Processes and Reading Welding Representations

Reading Prints of Pictorial Drawings

Reading Electrical Diagrams and Schematics

Filters

Exam 7: Manufacturing Materials and Processes

Brass is a widely used alloy of ____.

Gray iron is a popular casting material for ____.

____ is the intended condition of the material surface after manufacturing processes have been implemented

Injection molding is the most common process for creating elastomer products.

____ means the ability to be hammered or pressed into shape without breaking.

Nonferrous metals do not contain iron and have properties that are better suited for certain applications where steel may not be appropriate.

Select which type of part the calendering process is used for.

Manufacturing composites are referred to as reinforced plastics.

____ is a process of shaping malleable metals by hammering or pressing between dies that duplicate the desired shape.

Select a material that is combined with polymers to form very strong manufacturing composites.

Match the acronym with its correct meaning -American National Standards Institute

What does R&D stand for?

Which process is used to produce large containers such as tanks?

Name a person who specializes in machining.

Thermoplastics possess elastic qualities.

Typical parts made by a metal stamping process would be one of the following:

CADD designs can be quickly transformed into three-dimensional prototypes using different technologies. Which of the following is not one of these types of technology?

Name the material that is an alloy of iron containing 0.8% to 1.5% carbon.

A riser is used, depending on the size of the casting, to allow the excess metal to evacuate from the mold.

Introduction to Engineering and Manufacturing Technology Print Reading

Communicating with a Sketch

Scales and Precision Measurement

Reading Lines and Lettering on a Print

Reading Multiviews

Reading Auxiliary Views

Reading Dimensions

Reading Prints With Fasteners and Springs

Reading Sections, Revolutions, and Conventional Breaks

Reading Geometric Dimensioning and Tolerancing

Reading Linkage, Cam, Gear, and Bearing Prints

Reading Precision Sheet Metal Prints

Reading Prints of Working Drawings

Welding Processes and Reading Welding Representations

Reading Prints of Pictorial Drawings

Reading Electrical Diagrams and Schematics

Filters