Question 1

Build process errors result from misinterpretation of requirements.

Accepted Answer

A) True 
 B)False

Question 2

March the feature to its language.
-Independent of CPU

Accepted Answer

A)  Assembly language 
B)  C languag 
A)  Assembly language 
B)  C languag

Question 3

A USART is a universal synchronous and real time transmitter.

Accepted Answer

A) True 
 B)False

Question 4

Match the system description in with the system types .Use the system types as many times as needed.
-Has a damping ratio to determine under, critically, and over damped operation.

Accepted Answer

A)  First order lag 
B)  Second order lag 
A)  First order lag 
B)  Second order lag

Question 5

MATCHING. Choose the item in column 2 that best matches each item in column 1.
Match the process control term with the correct definition of the term. Definitions may be used more than once.
-Summing junction

Accepted Answer

A)  A pneumatic, electronic, or digital device that applies gain and compensation to the error input and produces an output that corrects for the change in the set point or process variable. 
B)  The parameter in the process that is being controlled. 
C)  The device used to convert the process variable output into a physical form with units that are consistent with the input requirements of the control system. 
D)  Any change that causes a change in the process variable. 
E)  A n integer or real value that represents the desired value of the process variable.
F)A control devices that physically changes the primary process variable and is the final hardware device in the loop.
G) A variable changed by the final control element to achieve the desired change in the process variable.
H) The difference between the set point and process variable.
I) The device used to convert the set point input into a physical form with units that are consistent with the input requirements of the control system.
J) The signal output that drives the final control element.
K) A device with two inputs that algebraically adds the two inputs and outputs the sum or difference. 
A)  A pneumatic, electronic, or digital device that applies gain and compensation to the error input and produces an output that corrects for the change in the set point or process variable. 
B)  The parameter in the process that is being controlled. 
C)  The device used to convert the process variable output into a physical form with units that are consistent with the input requirements of the control system. 
D)  Any change that causes a change in the process variable. 
E)  A n integer or real value that represents the desired value of the process variable.
F)A control devices that physically changes the primary process variable and is the final hardware device in the loop.
G) A variable changed by the final control element to achieve the desired change in the process variable.
H) The difference between the set point and process variable.
I) The device used to convert the set point input into a physical form with units that are consistent with the input requirements of the control system.
J) The signal output that drives the final control element.
K) A device with two inputs that algebraically adds the two inputs and outputs the sum or difference.

Question 6

March the feature to its language.
-Program structure

Accepted Answer

A)  Assembly language 
B)  C languag 
A)  Assembly language 
B)  C languag

Question 7

Controller gain is known and predictable, but process gain is often difficult to establish and may not be constant or linear.

Accepted Answer

A) True 
 B)False

Question 8

Assembly language is a low -level language that uses mnemonic instructions.

Accepted Answer

A) True 
 B)False

Question 9

Match the definition with the correct tuning method listed . Methods can be used as often as necessary.
-The process must be in the automatic or closed loop mode of operation.

Accepted Answer

A)  Process reaction method 
B)  Ultimate cycle metho 
A)  Process reaction method 
B)  Ultimate cycle metho

Question 10

Match the type of code t o its name.
-Source

Accepted Answer

A)  Routine 
B)  Code used by the MCU 
C)  Group of routines 
D)  Code generated by the programmer 
A)  Routine 
B)  Code used by the MCU 
C)  Group of routines 
D)  Code generated by the programmer

Question 11

Match the definition with the correct tuning method listed . Methods can be used as often as necessary.
-Uses values from a first order response curve in the equations for the tuning parameters.

Accepted Answer

A)  Process reaction method 
B)  Ultimate cycle metho 
A)  Process reaction method 
B)  Ultimate cycle metho

Question 12

If a square -root extractor is added to a control systems to linearize a process controller output then the controller is often called an adaptive controller.

Accepted Answer

A) True 
 B)False

Question 13

Process control systems have so much integration of technology that it is not possible to separate process problems from control problems.

Accepted Answer

A) True 
 B)False

Question 14

MATCHING. Choose the item in column 2 that best matches each item in column 1.
Match the process control term with the correct definition of the term. Definitions may be used more than once.
-Actuating signal

Accepted Answer

A)  A pneumatic, electronic, or digital device that applies gain and compensation to the error input and produces an output that corrects for the change in the set point or process variable. 
B)  The parameter in the process that is being controlled. 
C)  The device used to convert the process variable output into a physical form with units that are consistent with the input requirements of the control system. 
D)  Any change that causes a change in the process variable. 
E)  A n integer or real value that represents the desired value of the process variable.
F)A control devices that physically changes the primary process variable and is the final hardware device in the loop.
G) A variable changed by the final control element to achieve the desired change in the process variable.
H) The difference between the set point and process variable.
I) The device used to convert the set point input into a physical form with units that are consistent with the input requirements of the control system.
J) The signal output that drives the final control element.
K) A device with two inputs that algebraically adds the two inputs and outputs the sum or difference. 
A)  A pneumatic, electronic, or digital device that applies gain and compensation to the error input and produces an output that corrects for the change in the set point or process variable. 
B)  The parameter in the process that is being controlled. 
C)  The device used to convert the process variable output into a physical form with units that are consistent with the input requirements of the control system. 
D)  Any change that causes a change in the process variable. 
E)  A n integer or real value that represents the desired value of the process variable.
F)A control devices that physically changes the primary process variable and is the final hardware device in the loop.
G) A variable changed by the final control element to achieve the desired change in the process variable.
H) The difference between the set point and process variable.
I) The device used to convert the set point input into a physical form with units that are consistent with the input requirements of the control system.
J) The signal output that drives the final control element.
K) A device with two inputs that algebraically adds the two inputs and outputs the sum or difference.

Question 15

The dead band in a two -position controller causes the outputs to change when input error is at plus one -half of the dead band and at minus one -half of the dead band.

Accepted Answer

A) True 
 B)False

Question 16

There are three distinct types of response curves: underdamped, critically damped, and overdamped.

Accepted Answer

A) True 
 B)False

Question 17

Two -position controllers do not have output hystersis but on -off types have output hystersis.

Accepted Answer

A) True 
 B)False

Question 18

The forced system response is what a system does after a disturbance or set point change and dies out to 0 or a steady oscillation if the system is stable.

Accepted Answer

A) True 
 B)False

Question 19

Match the system description in with the system types .Use the system types as many times as needed.
-Two storage elements and one dissipative element.

Accepted Answer

A)  First order lag 
B)  Second order lag 
A)  First order lag 
B)  Second order lag

Question 20

Find the true statement for the process controller for a long process with a large inertia and large capacitance.

Accepted Answer

A)  A P controller would be the cost effective solution. 
B)  A PID controller would be the cost effective solution. 
C)  An on -off controller would be the cost effective solution. 
D)  A PI controller would be the cost effective solution. 
E)  A PD controller would be the cost effective solution. 
A)  A P controller would be the cost effective solution. 
B)  A PID controller would be the cost effective solution. 
C)  An on -off controller would be the cost effective solution. 
D)  A PI controller would be the cost effective solution. 
E)  A PD controller would be the cost effective solution.

Build process errors result from misinterpretation of requirements.

March the feature to its language. -Independent of CPU

A USART is a universal synchronous and real time transmitter.

Match the system description in with the system types .Use the system types as many times as needed. -Has a damping ratio to determine under, critically, and over damped operation.

MATCHING. Choose the item in column 2 that best matches each item in column 1. Match the process control term with the correct definition of the term. Definitions may be used more than once. -Summing junction

March the feature to its language. -Program structure

Controller gain is known and predictable, but process gain is often difficult to establish and may not be constant or linear.

Assembly language is a low -level language that uses mnemonic instructions.

Match the definition with the correct tuning method listed . Methods can be used as often as necessary. -The process must be in the automatic or closed loop mode of operation.

Match the type of code t o its name. -Source

Match the definition with the correct tuning method listed . Methods can be used as often as necessary. -Uses values from a first order response curve in the equations for the tuning parameters.

If a square -root extractor is added to a control systems to linearize a process controller output then the controller is often called an adaptive controller.

Process control systems have so much integration of technology that it is not possible to separate process problems from control problems.

MATCHING. Choose the item in column 2 that best matches each item in column 1. Match the process control term with the correct definition of the term. Definitions may be used more than once. -Actuating signal

The dead band in a two -position controller causes the outputs to change when input error is at plus one -half of the dead band and at minus one -half of the dead band.

There are three distinct types of response curves: underdamped, critically damped, and overdamped.

Two -position controllers do not have output hystersis but on -off types have output hystersis.

The forced system response is what a system does after a disturbance or set point change and dies out to 0 or a steady oscillation if the system is stable.

Match the system description in with the system types .Use the system types as many times as needed. -Two storage elements and one dissipative element.

Find the true statement for the process controller for a long process with a large inertia and large capacitance.

Introduction to Industrial Control Systems, Discrete Control Input and Output Devices

Solidstate Devices in Industrial Applications, Operational Amplifiers and Linear ICS

SCRS, Triacs, Other Thryristors, Discrete Automation Sensors and Devices

Analog Processes Control Devices, Sensors and Safety

DC Motors, Control Circuits, AC Motors and Variable Speed Drives

Special Purpose Motor, Control Devices and Programmable Logic Controllers

Industrial Robots, Automation Systems and Data Communication Between Intelligent Machines

Filters

Exam 7: Embedded Microcontrollers, Open and Closed Loop Process Control

Build process errors result from misinterpretation of requirements.

March the feature to its language. -Independent of CPU

A USART is a universal synchronous and real time transmitter.

Match the system description in with the system types .Use the system types as many times as needed. -Has a damping ratio to determine under, critically, and over damped operation.

MATCHING. Choose the item in column 2 that best matches each item in column 1. Match the process control term with the correct definition of the term. Definitions may be used more than once. -Summing junction

March the feature to its language. -Program structure

Controller gain is known and predictable, but process gain is often difficult to establish and may not be constant or linear.

Assembly language is a low -level language that uses mnemonic instructions.

Match the definition with the correct tuning method listed . Methods can be used as often as necessary. -The process must be in the automatic or closed loop mode of operation.

Match the type of code t o its name. -Source

Match the definition with the correct tuning method listed . Methods can be used as often as necessary. -Uses values from a first order response curve in the equations for the tuning parameters.

If a square -root extractor is added to a control systems to linearize a process controller output then the controller is often called an adaptive controller.

Process control systems have so much integration of technology that it is not possible to separate process problems from control problems.

MATCHING. Choose the item in column 2 that best matches each item in column 1. Match the process control term with the correct definition of the term. Definitions may be used more than once. -Actuating signal

The dead band in a two -position controller causes the outputs to change when input error is at plus one -half of the dead band and at minus one -half of the dead band.

There are three distinct types of response curves: underdamped, critically damped, and overdamped.

Two -position controllers do not have output hystersis but on -off types have output hystersis.

The forced system response is what a system does after a disturbance or set point change and dies out to 0 or a steady oscillation if the system is stable.

Match the system description in with the system types .Use the system types as many times as needed. -Two storage elements and one dissipative element.

Find the true statement for the process controller for a long process with a large inertia and large capacitance.

Introduction to Industrial Control Systems, Discrete Control Input and Output Devices

Solidstate Devices in Industrial Applications, Operational Amplifiers and Linear ICS

SCRS, Triacs, Other Thryristors, Discrete Automation Sensors and Devices

Analog Processes Control Devices, Sensors and Safety

DC Motors, Control Circuits, AC Motors and Variable Speed Drives

Special Purpose Motor, Control Devices and Programmable Logic Controllers

Industrial Robots, Automation Systems and Data Communication Between Intelligent Machines

Filters