Question 1

Commonly damaged areas of vehicles being hoisted include ________.

Accepted Answer

A)  Body panels
B)  Exhaust systems
C)  Both A and B
D)  Neither A nor B C

Question 2

A creeper should be stored ________.

Accepted Answer

A)  Upside down on the floor
B)  Flat on the floor
C)  Vertically
D)  Under a vehicle C

Question 3

Before lowering the vehicle, what should the technician do?

Accepted Answer

A)  Be sure no one will be walking under or near the vehicle
B)  Be sure nothing is underneath the vehicle
C)  Raise the vehicle enough to release the safety latch
D)  All of these D

Question 4

Vehicle hoists are rated by ________.

Accepted Answer

A)  Maximum lifting capacity
B)  The maximum height a vehicle can be lifted
C)  Both A and B
D)  Neither A nor B

Question 5

Technician A says to never look away from a vehicle being hoisted. Technician B says that the vehicle must be raised off the mechanical locks before lowering. Which technician is correct?

Accepted Answer

A)  Technician A only
B)  Technician B only
C)  Both technicians A and B
D)  Neither technician A nor B

Question 6

Tall pad extensions are used ________.

Accepted Answer

A)  To contact the pinch welds on passenger vehicles
B)  To engage the frame of trucks
C)  Both A and B
D)  Neither A nor B

Question 7

Most floor jacks have ________ casters.

Accepted Answer

A)  Eight
B)  Two
C)  Four
D)  Six

Question 8

When removing heavy objects that may change the center of gravity of a vehicle ________.

Accepted Answer

A)  Use tall safety stands
B)  Position hoist arms as close to vehicle corners as possible
C)  Both A and B
D)  Neither A nor B

Question 9

The SAE standard for hoist location is ________.

Accepted Answer

A)  SAE-2009
B)  JRP-2184
C)  J-14302
D)  J-1980

Question 10

Tall safety stands would be used to ________.

Accepted Answer

A)  Help support the vehicle when a major component is removed from the vehicle
B)  Lift a component such as an engine high off the ground
C)  Lift a vehicle
D)  Both B and C

Question 11

Proper lifting usually requires the vehicle to be ________.

Accepted Answer

A)  Positioned with the front wheel centered on the tire pad
B)  Centered in the stall
C)  Both A and B
D)  Neither A nor B

Question 12

Technician A says that a hoist can be stopped at any level as long as the safety latch engages. Technician B says that the vehicle should be hoisted to the top of the hoist travel for safety. Which technician is correct?

Accepted Answer

A)  Technician A only
B)  Technician B only
C)  Both technicians A and B
D)  Neither technician A nor B

Question 13

When checking stability, how high should the vehicle be raised?

Accepted Answer

A)  About 1 foot (30 cm) 
B)  About 2 inches (5 cm) 
C)  About 3 feet (91 cm) 
D)  About 6 inches (15 cm)

Question 14

What can be used to prevent damage to vehicle components?

Accepted Answer

A)  The correct size lift pads
B)  A block of wood used with jack stands
C)  Both A and B
D)  Neither A nor B

Question 15

Floor jacks are designed to support a load.

Accepted Answer

A) True 
 B)False

Question 16

Technician A says that a creeper should be stored vertically. Technician B says that a creeper should be stored on its casters. Which technician is correct?

Accepted Answer

A)  Technician A only
B)  Technician B only
C)  Both technicians A and B
D)  Neither technician A nor B

Question 17

The proper height for lifting should place the work area ________.

Accepted Answer

A)  Over the technicians head
B)  At chest level
C)  Near the floor
D)  None of these

Question 18

Technician A says that drive-up ramps may shift and "kick out" allowing the vehicle to drop unexpectedly. Technician B says that the wheels should always be chocked when using ramps. Which technician is correct?

Accepted Answer

A)  Technician A only
B)  Technician B only
C)  Both technicians A and B
D)  Neither technician A nor B

Question 19

Which symbol is used to indicate safe lifting points?

Accepted Answer

A)  Square
B)  Circle
C)  Triangle
D)  None of these

Question 20

Pad extensions may be needed when hoisting what type of vehicle?

Accepted Answer

A)  Small cars
B)  Pickup trucks
C)  Vans
D)  Either B or C

Exam 11: Vehicle Lifting and Hoisting

Commonly damaged areas of vehicles being hoisted include ________.

A creeper should be stored ________.

Before lowering the vehicle, what should the technician do?

Vehicle hoists are rated by ________.

Technician A says to never look away from a vehicle being hoisted. Technician B says that the vehicle must be raised off the mechanical locks before lowering. Which technician is correct?

Tall pad extensions are used ________.

Most floor jacks have ________ casters.

When removing heavy objects that may change the center of gravity of a vehicle ________.

The SAE standard for hoist location is ________.

Tall safety stands would be used to ________.

Proper lifting usually requires the vehicle to be ________.

Technician A says that a hoist can be stopped at any level as long as the safety latch engages. Technician B says that the vehicle should be hoisted to the top of the hoist travel for safety. Which technician is correct?

When checking stability, how high should the vehicle be raised?

What can be used to prevent damage to vehicle components?

Floor jacks are designed to support a load.

Technician A says that a creeper should be stored vertically. Technician B says that a creeper should be stored on its casters. Which technician is correct?

The proper height for lifting should place the work area ________.

Technician A says that drive-up ramps may shift and "kick out" allowing the vehicle to drop unexpectedly. Technician B says that the wheels should always be chocked when using ramps. Which technician is correct?

Which symbol is used to indicate safe lifting points?

Pad extensions may be needed when hoisting what type of vehicle?