Question 1

Which of the following specifies the operations necessary to complete a subassembly or finished good and the sequence of operations?

Accepted Answer

A)  parts master 
B)  routing master 
C)  work center master 
D)  bill of materials 
A)  parts master 
B)  routing master 
C)  work center master 
D)  bill of materials

Question 2

______________________________ authorize and record movement of a job from one work center to another.

Accepted Answer

The answer of ______________________________ authorize and record movement of a...

Question 3

Pull manufacturing should lead to all of the following except:

Accepted Answer

A)  short production runs 
B)  increased work in process and finished goods inventories 
C)  continuous flow operations 
D)  a cellular arrangement of factory machinery 
A)  short production runs 
B)  increased work in process and finished goods inventories 
C)  continuous flow operations 
D)  a cellular arrangement of factory machinery

Question 4

______________________________ is the application of computer and communications technology to improve productivity by linking computer numerical control (CNC)machines,monitoring production,and providing automatic feedback to control operations.

Accepted Answer

Computer-aided manuf

Question 5

The shop floor control process is devoted to monitoring and recording the status of manufacturing orders as they proceed through the factory.

Accepted Answer

A) True 
 B)False

Question 6

The objectives of just-in-time (JIT)manufacturing usually include all of the following except:

Accepted Answer

A)  large lot sizes 
B)  zero defects 
C)  zero setup times 
D)  zero lead times 
A)  large lot sizes 
B)  zero defects 
C)  zero setup times 
D)  zero lead times

Question 7

This shows when a manufacturing order or purchase order should be released so that the subassemblies and raw materials will be available when needed.

Accepted Answer

A)  bill of materials 
B)  routing sheet 
C)  time-phased order requirements schedule 
D)  parts master file 
A)  bill of materials 
B)  routing sheet 
C)  time-phased order requirements schedule 
D)  parts master file

Question 8

Which of the following statements is false?

Accepted Answer

A)  With the pull approach to manufacturing,factory machinery typically is arranged in factory cells. 
B)  The pull approach to manufacturing should lead to reduced work in process and finished goods inventories. 
C)  The pull approach to manufacturing should lead to shorter production runs. 
D)  Enterprise resource planning (ERP)employs a pull approach to manufacturing. 
A)  With the pull approach to manufacturing,factory machinery typically is arranged in factory cells. 
B)  The pull approach to manufacturing should lead to reduced work in process and finished goods inventories. 
C)  The pull approach to manufacturing should lead to shorter production runs. 
D)  Enterprise resource planning (ERP)employs a pull approach to manufacturing.

Question 9

A(n)______________________________ is the assigned location where a worker performs his or her job;it could be a machine or a workbench.

Accepted Answer

The answer of A(n)______________________________ is the assigned location where a...

Question 10

Manufacturing is often the quickest way for developing countries to increase domestic wealth and citizen wages.

Accepted Answer

A) True 
 B)False

Question 11

______________________________ are the sum of costs to design,produce,market,deliver,and support a product from conception to ultimate discontinuance.

Accepted Answer

The answer of ______________________________ are the sum of costs to...

Question 12

The computer technology application that automates the product design process,including but not limited to the functions of geometric modeling,materials stress and strain analysis,drafting,storing product specifications,and mechanical simulation of a product's performance,is called CAD/CAE.

Accepted Answer

A) True 
 B)False

Question 13

Variance analysis is the process of comparing actual information about input costs and usage to standards.

Accepted Answer

A) True 
 B)False

Question 14

A(n)______________________________ is a computer-based cart capable of delivering parts and tools among multiple work centers.

Accepted Answer

automated guided veh

Question 15

Materials requirements planning (mrp)normally would use all of the following inputs except:

Accepted Answer

A)  master production schedule (MPS) 
B)  bill of materials 
C)  routing file 
D)  raw materials inventory status data 
A)  master production schedule (MPS) 
B)  bill of materials 
C)  routing file 
D)  raw materials inventory status data

Question 16

______________________________ is accumulation of the data on current inventories,sales commitments,and planned production to determine whether the production of finished goods will be sufficient to commit to additional sales orders.

Accepted Answer

Available

Question 17

Match the terms in the left column below with the definitions in the right column by placing the letter next to the term in the blank space next to the definition.

Accepted Answer

The answer of Match the terms in the left column...

Question 18

Which of the following lists the detailed specifications for each raw materials item?

Accepted Answer

A)  parts master 
B)  routing master 
C)  work center master 
D)  bill of materials 
A)  parts master 
B)  routing master 
C)  work center master 
D)  bill of materials

Question 19

An automated storage and retrieval system (AS/RS)is a computer-controlled machine that stores and retrieves parts and tools.

Accepted Answer

A) True 
 B)False

Question 20

Which of the following has included management of throughput time and pull manufacturing?

Accepted Answer

A)  product innovation 
B)  production process innovation 
C)  supply chain management 
D)  management accounting systems 
A)  product innovation 
B)  production process innovation 
C)  supply chain management 
D)  management accounting systems

Which of the following specifies the operations necessary to complete a subassembly or finished good and the sequence of operations?

______________________________ authorize and record movement of a job from one work center to another.

Pull manufacturing should lead to all of the following except:

______________________________ is the application of computer and communications technology to improve productivity by linking computer numerical control (CNC)machines,monitoring production,and providing automatic feedback to control operations.

The shop floor control process is devoted to monitoring and recording the status of manufacturing orders as they proceed through the factory.

The objectives of just-in-time (JIT)manufacturing usually include all of the following except:

This shows when a manufacturing order or purchase order should be released so that the subassemblies and raw materials will be available when needed.

Which of the following statements is false?

A(n)______________________________ is the assigned location where a worker performs his or her job;it could be a machine or a workbench.

Manufacturing is often the quickest way for developing countries to increase domestic wealth and citizen wages.

______________________________ are the sum of costs to design,produce,market,deliver,and support a product from conception to ultimate discontinuance.

The computer technology application that automates the product design process,including but not limited to the functions of geometric modeling,materials stress and strain analysis,drafting,storing product specifications,and mechanical simulation of a product's performance,is called CAD/CAE.

Variance analysis is the process of comparing actual information about input costs and usage to standards.

A(n)______________________________ is a computer-based cart capable of delivering parts and tools among multiple work centers.

Materials requirements planning (mrp)normally would use all of the following inputs except:

______________________________ is accumulation of the data on current inventories,sales commitments,and planned production to determine whether the production of finished goods will be sufficient to commit to additional sales orders.

Match the terms in the left column below with the definitions in the right column by placing the letter next to the term in the blank space next to the definition.

Which of the following lists the detailed specifications for each raw materials item?

An automated storage and retrieval system (AS/RS)is a computer-controlled machine that stores and retrieves parts and tools.

Which of the following has included management of throughput time and pull manufacturing?

Introduction to Accounting Information Systems

Enterprise Systems

Electronic Business E-Business-Systems

Documenting Information Systems

Database Management Systems

Relational Databases and SQL

Controlling Information Systems: Introduction to Enterprise Risk Management and Internal Control

Controlling Information Systems: Introduction to Pervasive Controls

Controlling Information Systems: Business Process and Application Controls

The Order Entrysales Oesprocess

The Billingaccounts Receivablecash Receipts Barcrprocess

The Purchasing Process

The Accounts Payablecash Disbursements Apcdprocess

The Human Resources Process Hrmanagement and Payroll Processes

The General Ledger and Business Reporting Glbrprocess

Acquiring and Implementing Accounting Information Systems

Filters

Exam 15: Integrated Production Processes IPP

Which of the following specifies the operations necessary to complete a subassembly or finished good and the sequence of operations?

______________________________ authorize and record movement of a job from one work center to another.

Pull manufacturing should lead to all of the following except:

______________________________ is the application of computer and communications technology to improve productivity by linking computer numerical control (CNC)machines,monitoring production,and providing automatic feedback to control operations.

The shop floor control process is devoted to monitoring and recording the status of manufacturing orders as they proceed through the factory.

The objectives of just-in-time (JIT)manufacturing usually include all of the following except:

This shows when a manufacturing order or purchase order should be released so that the subassemblies and raw materials will be available when needed.

Which of the following statements is false?

A(n)______________________________ is the assigned location where a worker performs his or her job;it could be a machine or a workbench.

Manufacturing is often the quickest way for developing countries to increase domestic wealth and citizen wages.

______________________________ are the sum of costs to design,produce,market,deliver,and support a product from conception to ultimate discontinuance.

The computer technology application that automates the product design process,including but not limited to the functions of geometric modeling,materials stress and strain analysis,drafting,storing product specifications,and mechanical simulation of a product's performance,is called CAD/CAE.

Variance analysis is the process of comparing actual information about input costs and usage to standards.

A(n)______________________________ is a computer-based cart capable of delivering parts and tools among multiple work centers.

Materials requirements planning (mrp)normally would use all of the following inputs except:

______________________________ is accumulation of the data on current inventories,sales commitments,and planned production to determine whether the production of finished goods will be sufficient to commit to additional sales orders.

Match the terms in the left column below with the definitions in the right column by placing the letter next to the term in the blank space next to the definition.

Which of the following lists the detailed specifications for each raw materials item?

An automated storage and retrieval system (AS/RS)is a computer-controlled machine that stores and retrieves parts and tools.

Which of the following has included management of throughput time and pull manufacturing?

Introduction to Accounting Information Systems

Enterprise Systems

Electronic Business E-Business-Systems

Documenting Information Systems

Database Management Systems

Relational Databases and SQL

Controlling Information Systems: Introduction to Enterprise Risk Management and Internal Control

Controlling Information Systems: Introduction to Pervasive Controls

Controlling Information Systems: Business Process and Application Controls

The Order Entrysales Oesprocess

The Billingaccounts Receivablecash Receipts Barcrprocess

The Purchasing Process

The Accounts Payablecash Disbursements Apcdprocess

The Human Resources Process Hrmanagement and Payroll Processes

The General Ledger and Business Reporting Glbrprocess

Acquiring and Implementing Accounting Information Systems

Filters