Exam 20: Cabinets and Countertops

The ____ type cabinet door has rabbeted edges that overlap the opening by about 3/8 inch on all sides.

____-type laminate is available only in widths of 4 feet or 8 feet.

Shimming the base cabinets eliminates the need for a molding.

When installing ____ hinges, first screw the hinges on the door.

High quality drawers are made with rabbeted or butt joints.

The ____ drawer joint is the easiest to make, but it must be strengthened with fasteners in addition to glue.

The prints for a building contain plans, elevations, and details that show the ____ of cabinets.

Standard wall cabinets are ____ inches deep.

If the edge of a countertop has a ____ corner, the laminate can be bent.

____ is used for bonding plastic laminates and other thin, flexible material to surfaces.

____ is bending laminate with heat to a radius of 3/4 inch or less.

The leaves of a ____ hinge are set into gains in the edges of the frame and the door, in the same manner as for entrance doors.

Manufactured cabinets are available in widths ranging from 18" to 42".

Cabinet doors styles are flush, overlay and lipped.

____ hinges are applied to the exterior surface of the door and frame.

Pieces of laminated adhered with contact cement may be easily adjusted into position after the glued surfaces touch.

Doors can be classified by their construction as solid or ____.

Many ____ (bathroom) cabinets are made 31 1/2 inches high and 21 inches deep.

Laminates are ordinarily used in ____ thicknesses.

It is often easier to install upper cabinets before base cabinets.