Exam 18: Interior Finish

Flooring is blind nailed by driving nails at about a ____-degree angle through the flooring.

Prefinished strip flooring should be sanded after installation.

Coped joints are performed on outside miters.

A ____ box is a tool that cuts material at an angle.

Oak flooring is available ____-sawed and plain-sawed.

Muntins are window grills and are often removable.

Designated by location, base, base shoe, and ____ are moldings applied at the bottom of walls where they meet the floor.

A suspended ceiling system consists of panels that are laid into a metal grid.

A ____ is a bevel on the edge of a board that extends only partway through the thickness of the stock.

____ flooring is installed like strip flooring.

____ grades of pecan flooring contain all heartwood.

One head of the heavy hammer used with a power nailer is ____ and the other is steel.

S4S is the abbreviation for "____ four sides."

On the same window, aprons should have the same molded shape as casings.

If a floor that is 384 square feet is to be covered with standard 2 1/4-inch flooring, ____ board feet of flooring will be required.

The first piece of window trim installed is usually the apron.

____ are L-shaped pieces that are fastened to the wall to support the other components of the ceiling system.

Molding usually comes in lengths of 8, 10, 12, 14, and ____ feet.

Door ____ are moldings applied around the door opening.

A piece of 1 * 4 or 1 * 6 stock called a ____ is installed around the walls of a closet to support the shelf and the rod.