Question 1

The material note is usually found ____.

Accepted Answer

A)  in the title block 
B)  near the revision block 
C)  with a leader pointing to one of the parts 
D)  both b and c 
E)  none of the above 
A)  in the title block 
B)  near the revision block 
C)  with a leader pointing to one of the parts 
D)  both b and c 
E)  none of the above

Question 2

The taper of a pin is 0.35:12. What is the taper for a 4 inch long pin?

Accepted Answer

A)  0.08 inches 
B)  0.12 inches 
C)  16.8 inches 
D)  137.14 inches 
E)  none of the above 
A)  0.08 inches 
B)  0.12 inches 
C)  16.8 inches 
D)  137.14 inches 
E)  none of the above

Question 3

Threads per inch is the number of threads measured in one inch. The reciprocal of the pitch in inches.

Accepted Answer

A) True 
 B)False

Question 4

Select the abbreviation for taper pipe treads.

Accepted Answer

A)  TPT 
B)  NPTF 
C)  NPT 
D)  none of the above 
A)  TPT 
B)  NPTF 
C)  NPT 
D)  none of the above

Question 5

A lathe is a machine that holds a piece of material between two centers or in a chucking device.

Accepted Answer

A) True 
 B)False

Question 6

Define helix direction as used in spring terminology, and provide how it is specified on the print.

Accepted Answer

The helix direction can be spe

Question 7

A thread note must always be in the same order and be accurate; otherwise, the thread cannot be manufactured correctly.

Accepted Answer

A) True 
 B)False

Question 8

A blind hole is a hole that goes through the material in a way that you cannot see it.

Accepted Answer

A) True 
 B)False

Question 9

Washers serve as a cushion or a bearing surface for a bold head or nut.

Accepted Answer

A) True 
 B)False

Question 10

Threaded rod is an external thread machined on a shaft without a head.

Accepted Answer

A) True 
 B)False

Question 11

Rivets are classified by ____.

Accepted Answer

A)  length 
B)  head type 
C)  body diameter 
D)  all of the above 
E)  none of the above 
A)  length 
B)  head type 
C)  body diameter 
D)  all of the above 
E)  none of the above

Question 12

A note is used to specify a pipe thread on a print.

Accepted Answer

A) True 
 B)False

Question 13

MATCHING
Match the word or phrase with its correct meaning.
-A thread that engages with the mating thread by rotating counter-clockwise.

Accepted Answer

A) axis 
B) body 
C) chamfer 
D) root 
E) tap
F)pitch
G)die
H)crest
I)classes of threads
J)depth of thread
K)lead
L)included angle
M)left-hand thread
N)major diameter
O)minor diameter
P)thread
Q)right-hand thread
R)tap drill 
A) axis 
B) body 
C) chamfer 
D) root 
E) tap
F)pitch
G)die
H)crest
I)classes of threads
J)depth of thread
K)lead
L)included angle
M)left-hand thread
N)major diameter
O)minor diameter
P)thread
Q)right-hand thread
R)tap drill

Question 14

Self-clinching nuts are used when strong internal threads are needed for component attachment or fabrication assembly.

Accepted Answer

A) True 
 B)False

Question 15

____ is the dimension from root to root through the axis on an external thread and measured across the crests through the center for an internal thread.

Accepted Answer

A)  Minor diameter 
B)  Pitch diameter 
C)  Major diameter 
D)  Chamfer angle 
E)  none of the above 
A)  Minor diameter 
B)  Pitch diameter 
C)  Major diameter 
D)  Chamfer angle 
E)  none of the above

Question 16

For what are machine screws used?

Accepted Answer

Machine screws are u

Question 17

Sometimes referred to as the shank, that portion of a screw shaft that is left unthreaded.

Accepted Answer

The answer of Sometimes referred to as the shank, that...

Question 18

MATCHING
Match the word or phrase with its correct meaning.
-The centerline of the cylindrical thread shape.

Accepted Answer

A) axis 
B) body 
C) chamfer 
D) root 
E) tap
F)pitch
G)die
H)crest
I)classes of threads
J)depth of thread
K)lead
L)included angle
M)left-hand thread
N)major diameter
O)minor diameter
P)thread
Q)right-hand thread
R)tap drill 
A) axis 
B) body 
C) chamfer 
D) root 
E) tap
F)pitch
G)die
H)crest
I)classes of threads
J)depth of thread
K)lead
L)included angle
M)left-hand thread
N)major diameter
O)minor diameter
P)thread
Q)right-hand thread
R)tap drill

Question 19

Schematic spring representations show ____.

Accepted Answer

A)  major diameter; diagonal lines 
B)  approximate representation of the coils using lines 
C)  minor diameter and free length; diagonal lines 
D)  free length and pitch; horizontal lines 
E)  none of the above 
A)  major diameter; diagonal lines 
B)  approximate representation of the coils using lines 
C)  minor diameter and free length; diagonal lines 
D)  free length and pitch; horizontal lines 
E)  none of the above

Question 20

Through holes are preferred over blind holes.

Accepted Answer

A) True 
 B)False

The material note is usually found ____.

The taper of a pin is 0.35:12. What is the taper for a 4 inch long pin?

Threads per inch is the number of threads measured in one inch. The reciprocal of the pitch in inches.

Select the abbreviation for taper pipe treads.

A lathe is a machine that holds a piece of material between two centers or in a chucking device.

Define helix direction as used in spring terminology, and provide how it is specified on the print.

A thread note must always be in the same order and be accurate; otherwise, the thread cannot be manufactured correctly.

A blind hole is a hole that goes through the material in a way that you cannot see it.

Washers serve as a cushion or a bearing surface for a bold head or nut.

Threaded rod is an external thread machined on a shaft without a head.

Rivets are classified by ____.

A note is used to specify a pipe thread on a print.

MATCHING Match the word or phrase with its correct meaning. -A thread that engages with the mating thread by rotating counter-clockwise.

Self-clinching nuts are used when strong internal threads are needed for component attachment or fabrication assembly.

____ is the dimension from root to root through the axis on an external thread and measured across the crests through the center for an internal thread.

For what are machine screws used?

Sometimes referred to as the shank, that portion of a screw shaft that is left unthreaded.

MATCHING Match the word or phrase with its correct meaning. -The centerline of the cylindrical thread shape.

Schematic spring representations show ____.

Through holes are preferred over blind holes.

Introduction to Engineering and Manufacturing Technology Print Reading

Communicating with a Sketch

Scales and Precision Measurement

Reading Lines and Lettering on a Print

Reading Multiviews

Reading Auxiliary Views

Manufacturing Materials and Processes

Reading Dimensions

Reading Sections, Revolutions, and Conventional Breaks

Reading Geometric Dimensioning and Tolerancing

Reading Linkage, Cam, Gear, and Bearing Prints

Reading Precision Sheet Metal Prints

Reading Prints of Working Drawings

Welding Processes and Reading Welding Representations

Reading Prints of Pictorial Drawings

Reading Electrical Diagrams and Schematics

Filters

Exam 9: Reading Prints With Fasteners and Springs

The material note is usually found ____.

The taper of a pin is 0.35:12. What is the taper for a 4 inch long pin?

Threads per inch is the number of threads measured in one inch. The reciprocal of the pitch in inches.

Select the abbreviation for taper pipe treads.

A lathe is a machine that holds a piece of material between two centers or in a chucking device.

Define helix direction as used in spring terminology, and provide how it is specified on the print.

A thread note must always be in the same order and be accurate; otherwise, the thread cannot be manufactured correctly.

A blind hole is a hole that goes through the material in a way that you cannot see it.

Washers serve as a cushion or a bearing surface for a bold head or nut.

Threaded rod is an external thread machined on a shaft without a head.

Rivets are classified by ____.

A note is used to specify a pipe thread on a print.

MATCHING Match the word or phrase with its correct meaning. -A thread that engages with the mating thread by rotating counter-clockwise.

Self-clinching nuts are used when strong internal threads are needed for component attachment or fabrication assembly.

____ is the dimension from root to root through the axis on an external thread and measured across the crests through the center for an internal thread.

For what are machine screws used?

Sometimes referred to as the shank, that portion of a screw shaft that is left unthreaded.

MATCHING Match the word or phrase with its correct meaning. -The centerline of the cylindrical thread shape.

Schematic spring representations show ____.

Through holes are preferred over blind holes.

Introduction to Engineering and Manufacturing Technology Print Reading

Communicating with a Sketch

Scales and Precision Measurement

Reading Lines and Lettering on a Print

Reading Multiviews

Reading Auxiliary Views

Manufacturing Materials and Processes

Reading Dimensions

Reading Sections, Revolutions, and Conventional Breaks

Reading Geometric Dimensioning and Tolerancing

Reading Linkage, Cam, Gear, and Bearing Prints

Reading Precision Sheet Metal Prints

Reading Prints of Working Drawings

Welding Processes and Reading Welding Representations

Reading Prints of Pictorial Drawings

Reading Electrical Diagrams and Schematics

Filters