Question 1

Select the following reference guide to look up specific information about pipe thread tapping.

Accepted Answer

A)  Thomas Records 
B)  Machinery's Handbook 
C)  Grainger Vendor Catalog 
D)  none of the above 
A)  Thomas Records 
B)  Machinery's Handbook 
C)  Grainger Vendor Catalog 
D)  none of the above

Question 2

Bottoming taps have lead in chamfer equal to ____ pitches.

Accepted Answer

A)  5 
B)  10 
C)  3 
D)  2 
A)  5 
B)  10 
C)  3 
D)  2

Question 3

No matter which spring representation method is used, several important specifications accompany the spring print. Name and describe these specifications, and list at least five types of information found in the spring specifications.

Accepted Answer

This information or specifications are a

Question 4

Give the ASME definition for mechanical spring.

Accepted Answer

A mechanical spring is defined

Question 5

A key is an important machine element that is employed to provide a negative connection for transmitting torque between a shaft and a hub, pulley, or wheels.

Accepted Answer

A) True 
 B)False

Question 6

Screw thread inserts are conically formed coils of diamond shaped wire made of stainless steel or phosphor bronze.

Accepted Answer

A) True 
 B)False

Question 7

The reciprocal of the pitch in inches is the ____.

Accepted Answer

A)  depth of thread 
B)  included angle 
C)  number of threads per inch 
D)  pitch diameter 
E)  none of the above 
A)  depth of thread 
B)  included angle 
C)  number of threads per inch 
D)  pitch diameter 
E)  none of the above

Question 8

____ transmit energy by a turning or twisting action.

Accepted Answer

A)  Helix springs 
B)  Torsion springs 
C)  Flat springs 
D)  Compression springs 
E)  none of the above 
A)  Helix springs 
B)  Torsion springs 
C)  Flat springs 
D)  Compression springs 
E)  none of the above

Question 9

Screw threads are a helix or conical spiral form on the external surface of a shaft, or internal surface of a cylindrical hole.

Accepted Answer

A) True 
 B)False

Question 10

Give the term used to define a helix or conical spiral formed on the external surface of a shaft or internal surface of a cylindrical hole.

Accepted Answer

The answer of Give the term used to define a...

Question 11

Cap screws are fine finished machine screws that are generally used with a nut.

Accepted Answer

A) True 
 B)False

Question 12

The most common method of producing an internal thread is the process of boring.

Accepted Answer

A) True 
 B)False

Question 13

MATCHING
Match the word or phrase with its correct meaning.
-The top of the external and bottom of the internal threads.

Accepted Answer

A) axis 
B) body 
C) chamfer 
D) root 
E) tap
F)pitch
G)die
H)crest
I)classes of threads
J)depth of thread
K)lead
L)included angle
M)left-hand thread
N)major diameter
O)minor diameter
P)thread
Q)right-hand thread
R)tap drill 
A) axis 
B) body 
C) chamfer 
D) root 
E) tap
F)pitch
G)die
H)crest
I)classes of threads
J)depth of thread
K)lead
L)included angle
M)left-hand thread
N)major diameter
O)minor diameter
P)thread
Q)right-hand thread
R)tap drill

Question 14

Spring function depends on ____.

Accepted Answer

A)  retraction 
B)  compression 
C)  extension 
D)  both b and c 
E)  all of the above 
A)  retraction 
B)  compression 
C)  extension 
D)  both b and c 
E)  all of the above

Question 15

Detailed threads are not common on most manufacturing prints because ____.

Accepted Answer

A)  they cannot be drawn accurately enough 
B)  they are much too time consuming to draw unless CADD is used 
C)  simplified thread representations are always used for print threads 
D)  both a and b 
E)  none of the above 
A)  they cannot be drawn accurately enough 
B)  they are much too time consuming to draw unless CADD is used 
C)  simplified thread representations are always used for print threads 
D)  both a and b 
E)  none of the above

Question 16

Vanish thread is also referred to as a partial thread, washout thread, or thread runout, and is that portion of the incomplete thread which is not fully formed at root or at crest and root.

Accepted Answer

A) True 
 B)False

Question 17

Flat springs are arched or bent flat metal shapes designed so when placed in machinery they create flexibility on adjacent parts.

Accepted Answer

A) True 
 B)False

Question 18

The detailed thread prints for American National Standard taper pipe threads are the same as Unified threads except that the major and minor diameters taper at a rate of .0625 inches per inch.

Accepted Answer

A) True 
 B)False

Question 19

Bolts can be ____ by torque applied to the head or to the nut.

Accepted Answer

A)  driven 
B)  tightened 
C)  released 
D)  both b and c 
E)  all of the above 
A)  driven 
B)  tightened 
C)  released 
D)  both b and c 
E)  all of the above

Question 20

____ is the bottom of external and the top of internal threads.

Accepted Answer

A)  Root 
B)  Clevis 
C)  Keyseat 
D)  Pitch 
E)  none of the above 
A)  Root 
B)  Clevis 
C)  Keyseat 
D)  Pitch 
E)  none of the above

Select the following reference guide to look up specific information about pipe thread tapping.

Bottoming taps have lead in chamfer equal to ____ pitches.

No matter which spring representation method is used, several important specifications accompany the spring print. Name and describe these specifications, and list at least five types of information found in the spring specifications.

Give the ASME definition for mechanical spring.

A key is an important machine element that is employed to provide a negative connection for transmitting torque between a shaft and a hub, pulley, or wheels.

Screw thread inserts are conically formed coils of diamond shaped wire made of stainless steel or phosphor bronze.

The reciprocal of the pitch in inches is the ____.

____ transmit energy by a turning or twisting action.

Screw threads are a helix or conical spiral form on the external surface of a shaft, or internal surface of a cylindrical hole.

Give the term used to define a helix or conical spiral formed on the external surface of a shaft or internal surface of a cylindrical hole.

Cap screws are fine finished machine screws that are generally used with a nut.

The most common method of producing an internal thread is the process of boring.

MATCHING Match the word or phrase with its correct meaning. -The top of the external and bottom of the internal threads.

Spring function depends on ____.

Detailed threads are not common on most manufacturing prints because ____.

Vanish thread is also referred to as a partial thread, washout thread, or thread runout, and is that portion of the incomplete thread which is not fully formed at root or at crest and root.

Flat springs are arched or bent flat metal shapes designed so when placed in machinery they create flexibility on adjacent parts.

The detailed thread prints for American National Standard taper pipe threads are the same as Unified threads except that the major and minor diameters taper at a rate of .0625 inches per inch.

Bolts can be ____ by torque applied to the head or to the nut.

____ is the bottom of external and the top of internal threads.

Introduction to Engineering and Manufacturing Technology Print Reading

Communicating with a Sketch

Scales and Precision Measurement

Reading Lines and Lettering on a Print

Reading Multiviews

Reading Auxiliary Views

Manufacturing Materials and Processes

Reading Dimensions

Reading Sections, Revolutions, and Conventional Breaks

Reading Geometric Dimensioning and Tolerancing

Reading Linkage, Cam, Gear, and Bearing Prints

Reading Precision Sheet Metal Prints

Reading Prints of Working Drawings

Welding Processes and Reading Welding Representations

Reading Prints of Pictorial Drawings

Reading Electrical Diagrams and Schematics

Filters

Exam 9: Reading Prints With Fasteners and Springs

Select the following reference guide to look up specific information about pipe thread tapping.

Bottoming taps have lead in chamfer equal to ____ pitches.

No matter which spring representation method is used, several important specifications accompany the spring print. Name and describe these specifications, and list at least five types of information found in the spring specifications.

Give the ASME definition for mechanical spring.

A key is an important machine element that is employed to provide a negative connection for transmitting torque between a shaft and a hub, pulley, or wheels.

Screw thread inserts are conically formed coils of diamond shaped wire made of stainless steel or phosphor bronze.

The reciprocal of the pitch in inches is the ____.

____ transmit energy by a turning or twisting action.

Screw threads are a helix or conical spiral form on the external surface of a shaft, or internal surface of a cylindrical hole.

Give the term used to define a helix or conical spiral formed on the external surface of a shaft or internal surface of a cylindrical hole.

Cap screws are fine finished machine screws that are generally used with a nut.

The most common method of producing an internal thread is the process of boring.

MATCHING Match the word or phrase with its correct meaning. -The top of the external and bottom of the internal threads.

Spring function depends on ____.

Detailed threads are not common on most manufacturing prints because ____.

Vanish thread is also referred to as a partial thread, washout thread, or thread runout, and is that portion of the incomplete thread which is not fully formed at root or at crest and root.

Flat springs are arched or bent flat metal shapes designed so when placed in machinery they create flexibility on adjacent parts.

The detailed thread prints for American National Standard taper pipe threads are the same as Unified threads except that the major and minor diameters taper at a rate of .0625 inches per inch.

Bolts can be ____ by torque applied to the head or to the nut.

____ is the bottom of external and the top of internal threads.

Introduction to Engineering and Manufacturing Technology Print Reading

Communicating with a Sketch

Scales and Precision Measurement

Reading Lines and Lettering on a Print

Reading Multiviews

Reading Auxiliary Views

Manufacturing Materials and Processes

Reading Dimensions

Reading Sections, Revolutions, and Conventional Breaks

Reading Geometric Dimensioning and Tolerancing

Reading Linkage, Cam, Gear, and Bearing Prints

Reading Precision Sheet Metal Prints

Reading Prints of Working Drawings

Welding Processes and Reading Welding Representations

Reading Prints of Pictorial Drawings

Reading Electrical Diagrams and Schematics

Filters