Question 1

If a cylinder needs to be placed in the horizontal position for a transport,which type of flowmeter would be the best to use?

Accepted Answer

A)  Multi-stage regulator 
B)  Back-pressure compensated flowmeter 
C)  Uncompensated Thorpe Tube flowmeter 
D)  Bourdon gauge 
A)  Multi-stage regulator 
B)  Back-pressure compensated flowmeter 
C)  Uncompensated Thorpe Tube flowmeter 
D)  Bourdon gauge

Question 2

Each floor of a building is divided into several zones.Each zone has a safety shutoff valve called a _______________

Accepted Answer

A)  zone valve. 
B)  riser. 
C)  reserve valve. 
D)  reducing valve. 
A)  zone valve. 
B)  riser. 
C)  reserve valve. 
D)  reducing valve.

Question 3

Which cylinder valve is found on gas cylinders containing less than 1500 psi of pressure?

Accepted Answer

A)  Direct-acting cylinder valve 
B)  Stem valve 
C)  Diaphragm cylinder valve 
D)  Outlet valve 
A)  Direct-acting cylinder valve 
B)  Stem valve 
C)  Diaphragm cylinder valve 
D)  Outlet valve

Question 4

Medical gas supply systems include all of the following EXCEPT ______________

Accepted Answer

A)  medical gas cylinders. 
B)  liquid systems. 
C)  oxygen concentrators. 
D)  oxygen regulators. 
A)  medical gas cylinders. 
B)  liquid systems. 
C)  oxygen concentrators. 
D)  oxygen regulators.

Question 5

A patient needs to be transported from the emergency department to the ICU on a 50% Venturi mask.What oxygen equipment is needed for you to accomplish the transport?

Accepted Answer

An oxygen cylinder is needed to provide

Question 6

What is the color code for a helium and oxygen mixture?

Accepted Answer

A)  White 
B)  Brown 
C)  Brown and green 
D)  Gray and green 
A)  White 
B)  Brown 
C)  Brown and green 
D)  Gray and green

Question 7

The most common service pressure indicated on an oxygen cylinder that is followed by a (+)sign is ___________.

Accepted Answer

A)  50 psi 
B)  2200 psi 
C)  2015 psi 
D)  2 psi 
A)  50 psi 
B)  2200 psi 
C)  2015 psi 
D)  2 psi

Question 8

The connection for attaching equipment for patient use is termed a station outlet.These outlets have what kind of fittings?

Accepted Answer

A)  Quick-connect fittings 
B)  Diameter-index safety system fittings 
C)  Reducing valve fittings 
D)  Either a or b 
A)  Quick-connect fittings 
B)  Diameter-index safety system fittings 
C)  Reducing valve fittings 
D)  Either a or b

If a cylinder needs to be placed in the horizontal position for a transport,which type of flowmeter would be the best to use?

Each floor of a building is divided into several zones.Each zone has a safety shutoff valve called a _______________

Which cylinder valve is found on gas cylinders containing less than 1500 psi of pressure?

Medical gas supply systems include all of the following EXCEPT ______________

A patient needs to be transported from the emergency department to the ICU on a 50% Venturi mask.What oxygen equipment is needed for you to accomplish the transport?

What is the color code for a helium and oxygen mixture?

The most common service pressure indicated on an oxygen cylinder that is followed by a (+)sign is ___________.

The connection for attaching equipment for patient use is termed a station outlet.These outlets have what kind of fittings?

Basics of Asepsis

Basic Patient Assessment: Vital Signs and Breath Sounds

Advanced Patient Assessment: Inspection, Palpation, and Percussion

Radiologic Assessment

Pulmonary Function Testing

Electrocardiography

Phlebotomy

Arterial Blood Gas Sampling

Hemodynamic Monitoring

Noninvasive Monitoring

Documentation and Goals Assessment

Oxygen Administration

Introduction to Respiratory Care Pharmacology

Humidity and Aerosol Therapy

Bronchial Hygiene Therapy

Hyperinflation Therapy

Bronchoscopy Assisting

Equipment Processing and Surveillance

Emergency Airway Management

Artificial Airway Care

Chest Tubes

Insertion and Maintenance of Intravenous Lines

Noninvasive Positive-Pressure Ventilation

Continuous Mechanical Ventilation

Advanced Modes of Mechanical Ventilation

Wave Form Analysis

Weaning and Discontinuance of Mechanical Ventilation

Neonatal Mechanical Ventilation

Filters

Exam 12: Oxygen Supply Systems

If a cylinder needs to be placed in the horizontal position for a transport,which type of flowmeter would be the best to use?

Each floor of a building is divided into several zones.Each zone has a safety shutoff valve called a _______________

Which cylinder valve is found on gas cylinders containing less than 1500 psi of pressure?

Medical gas supply systems include all of the following EXCEPT ______________

A patient needs to be transported from the emergency department to the ICU on a 50% Venturi mask.What oxygen equipment is needed for you to accomplish the transport?

What is the color code for a helium and oxygen mixture?

The most common service pressure indicated on an oxygen cylinder that is followed by a (+)sign is ___________.

The connection for attaching equipment for patient use is termed a station outlet.These outlets have what kind of fittings?

Basics of Asepsis

Basic Patient Assessment: Vital Signs and Breath Sounds

Advanced Patient Assessment: Inspection, Palpation, and Percussion

Radiologic Assessment

Pulmonary Function Testing

Electrocardiography

Phlebotomy

Arterial Blood Gas Sampling

Hemodynamic Monitoring

Noninvasive Monitoring

Documentation and Goals Assessment

Oxygen Administration

Introduction to Respiratory Care Pharmacology

Humidity and Aerosol Therapy

Bronchial Hygiene Therapy

Hyperinflation Therapy

Bronchoscopy Assisting

Equipment Processing and Surveillance

Emergency Airway Management

Artificial Airway Care

Chest Tubes

Insertion and Maintenance of Intravenous Lines

Noninvasive Positive-Pressure Ventilation

Continuous Mechanical Ventilation

Advanced Modes of Mechanical Ventilation

Wave Form Analysis

Weaning and Discontinuance of Mechanical Ventilation

Neonatal Mechanical Ventilation

Filters