Question 1

When the capacity of a power press is expressed in 100 tonnes, it implies that

Accepted Answer

A) Dead weight of the press is 100 tonnes 
B) Total production of material will be 100 tonnes in a day 
C) The maximum load that the press can apply is 50 tonnes 
D) All of the above 
E) None of the above 
A) Dead weight of the press is 100 tonnes 
B) Total production of material will be 100 tonnes in a day 
C) The maximum load that the press can apply is 50 tonnes 
D) All of the above 
E) None of the above

Question 2

For the measurement of viscosity the transduction method could be

Accepted Answer

A) Electron tube 
B) Magneto-electric 
C) Photoelectric 
D) Radioactive 
E) Capacitive 
A) Electron tube 
B) Magneto-electric 
C) Photoelectric 
D) Radioactive 
E) Capacitive

Question 3

When small castings are to be produced in large numbers, the type of pattern generally used is

Accepted Answer

A) Split pattern 
B) Loose piece pattern 
C) Sweep pattern 
D) Match-plate pattern 
E) Solid pattern 
A) Split pattern 
B) Loose piece pattern 
C) Sweep pattern 
D) Match-plate pattern 
E) Solid pattern

Question 4

In electrical resistance welding cleaning of metals to be welded

Accepted Answer

A) Is immaterial 
B) Is important 
C) Can be neglected 
D) Does not have any effect on the welding 
E) None of the above 
A) Is immaterial 
B) Is important 
C) Can be neglected 
D) Does not have any effect on the welding 
E) None of the above

Question 5

Warping may be avoided when quenching a long slender piece of work by

Accepted Answer

A) Holding the piece between clamps 
B) Holding the piece vertically over the quenching both and plunging it straight down 
C) Holding the piece on horizontally adequate supports 
D) Pulling the piece from both ends 
E) None of the above 
A) Holding the piece between clamps 
B) Holding the piece vertically over the quenching both and plunging it straight down 
C) Holding the piece on horizontally adequate supports 
D) Pulling the piece from both ends 
E) None of the above

Question 6

The weight of hammers used in a fitting ship is

Accepted Answer

A) 0.25 kg - 0.50 kg 
B) Parting off 
C) 0.45 kg - 0.70 kg 
D) 0.75 kg - 1 kg 
A) 0.25 kg - 0.50 kg 
B) Parting off 
C) 0.45 kg - 0.70 kg 
D) 0.75 kg - 1 kg

Question 7

Which turning aluminium the side rake angle is nearly

Accepted Answer

A) Parting off 
B) 5° 
C) 15° 
D) 10° 
E) 0° 
A) Parting off 
B) 5° 
C) 15° 
D) 10° 
E) 0°

Question 8

Which of the following does not represent the number of slip gauges in a metric set?

Accepted Answer

A) 110 
B) 45 
C) 88 
D) 65 
E) 103 
A) 110 
B) 45 
C) 88 
D) 65 
E) 103

Question 9

Machining allowance in case of die casting is

Accepted Answer

A) Same as in other methods of casting 
B) Generally not provided 
C) Small 
D) Very small 
E) Large 
A) Same as in other methods of casting 
B) Generally not provided 
C) Small 
D) Very small 
E) Large

Question 10

What multiple of basic unit is 'atto'?

Accepted Answer

A) 10-18 
B) 10-15 
C) 10-12 
D) 10-20 
E) 10-9 
A) 10-18 
B) 10-15 
C) 10-12 
D) 10-20 
E) 10-9

When the capacity of a power press is expressed in 100 tonnes, it implies that

For the measurement of viscosity the transduction method could be

When small castings are to be produced in large numbers, the type of pattern generally used is

In electrical resistance welding cleaning of metals to be welded

Warping may be avoided when quenching a long slender piece of work by

The weight of hammers used in a fitting ship is

Which turning aluminium the side rake angle is nearly

Which of the following does not represent the number of slip gauges in a metric set?

Machining allowance in case of die casting is

What multiple of basic unit is 'atto'?

Manufacturing Processes and Materials and Tools

Mechanical Engineering and Manufacturing Processes

Industrial Engineering and Manufacturing Processes and Materials

Mechanical Engineering: Casting, Machining, and Welding

Mechanical Engineering Processes and Concepts

Manufacturing and Machining Techniques

Mechanical Engineering: Foundry, Machining, and Materials

Metal Cleaning, Abrasives, and Machining Techniques

Manufacturing and Materials Engineering

Technical Manufacturing and Engineering

Manufacturing Processes: Wood Moisture, Alloyed Cast Iron, Cutting Tools, Welding

Techniques for Hardness Testing, Drilling, Machining, Welding, and Casting

Machining Processes, Techniques and Tools

Filters

Exam 6: Manufacturing and Welding Processes

When the capacity of a power press is expressed in 100 tonnes, it implies that

For the measurement of viscosity the transduction method could be

When small castings are to be produced in large numbers, the type of pattern generally used is

In electrical resistance welding cleaning of metals to be welded

Warping may be avoided when quenching a long slender piece of work by

The weight of hammers used in a fitting ship is

Which turning aluminium the side rake angle is nearly

Which of the following does not represent the number of slip gauges in a metric set?

Machining allowance in case of die casting is

What multiple of basic unit is 'atto'?

Manufacturing Processes and Materials and Tools

Mechanical Engineering and Manufacturing Processes

Industrial Engineering and Manufacturing Processes and Materials

Mechanical Engineering: Casting, Machining, and Welding

Mechanical Engineering Processes and Concepts

Manufacturing and Machining Techniques

Mechanical Engineering: Foundry, Machining, and Materials

Metal Cleaning, Abrasives, and Machining Techniques

Manufacturing and Materials Engineering

Technical Manufacturing and Engineering

Manufacturing Processes: Wood Moisture, Alloyed Cast Iron, Cutting Tools, Welding

Techniques for Hardness Testing, Drilling, Machining, Welding, and Casting

Machining Processes, Techniques and Tools

Filters