Question 1

Which file protocols are commonly used in HPE StoreOnce environments? (Choose two.)

Accepted Answer

A)  CIFS 
B)  NTFS 
C)  VFS 
D)  ZFS 
E)  NFS 
A)  CIFS 
B)  NTFS 
C)  VFS 
D)  ZFS 
E)  NFS

Question 2

What allows volume level data to be copied between an HPE 3PAR and an HPE StoreVirtual VSA?

Accepted Answer

A)  HPE StoreVirtual Peer Motion 
B)  HPE 3PAR Remote Copy 
C)  HPE Recovery Manager Central 
D)  HPE StoreServ Peer Motion 
A)  HPE StoreVirtual Peer Motion 
B)  HPE 3PAR Remote Copy 
C)  HPE Recovery Manager Central 
D)  HPE StoreServ Peer Motion

Question 3

During a proof-of-concept you need to implement an Inter-Switch-Link (ISL) between two HPE SN6000B SAN switches. Which port mode must be set to enable communication between the switches?

Accepted Answer

A)  N_Port 
B)  E_Port 
C)  F_Port 
D)  FL_Port 
A)  N_Port 
B)  E_Port 
C)  F_Port 
D)  FL_Port

Question 4

You are planning an upgrade to a customer's existing HPE 3PAR StoreServ 8200 to include 4-port 16Gb FC adapters. The servers are zoned to see the storage via four paths. The customer is concerned about storage availability during the upgrade. Which statement is correct about performing this upgrade?

Accepted Answer

A)  When NPIV is enabled, the HPE 3PAR Port persistence will show all four paths to the servers. 
B)  The MPIO service will do a failover, and the servers will continue to have access via two paths. 
C)  Windows servers require host explorer is installed to ensure MPIO is unaffected. 
D)  As long as MEM driver is installed on VMware vSphere, no path failures are seen. 
A)  When NPIV is enabled, the HPE 3PAR Port persistence will show all four paths to the servers. 
B)  The MPIO service will do a failover, and the servers will continue to have access via two paths. 
C)  Windows servers require host explorer is installed to ensure MPIO is unaffected. 
D)  As long as MEM driver is installed on VMware vSphere, no path failures are seen.

Question 5

What does DWPD (drive writes per day) for an SSD indicate?

Accepted Answer

A)  the maximum number of 4K host writes to the entire drive capacity of the SSD per day over a three-year period 
B)  the maximum number of erase operations to the entire drive capacity of the SSD per day over a three-year period 
C)  the maximum number of 4K host writes to the entire drive capacity of the SSD per day over a five-year period 
D)  the maximum number of drive rewrite cycles (erase and write) for the SSD over a five-year period 
A)  the maximum number of 4K host writes to the entire drive capacity of the SSD per day over a three-year period 
B)  the maximum number of erase operations to the entire drive capacity of the SSD per day over a three-year period 
C)  the maximum number of 4K host writes to the entire drive capacity of the SSD per day over a five-year period 
D)  the maximum number of drive rewrite cycles (erase and write) for the SSD over a five-year period

Question 6

A customer is concerned about media and transmission errors caused by any component in the I/O stack from the server host bus adapter (HBA) into the HPE 3PAR StoreServ ports. Which feature will address the customer's concern?

Accepted Answer

A)  Persistent Checksum 
B)  Persistent Cache 
C)  Peer Persistence 
D)  Persistent Ports 
A)  Persistent Checksum 
B)  Persistent Cache 
C)  Peer Persistence 
D)  Persistent Ports

Question 7

A customer is a cloud service provider with infrastructure powered by HPE 3PAR StoreServ 9000. The customer is concerned about their ability to ensure the quality of service and protect their tenants from unpredictable bursts of I/O from other tenants. What should you recommend to your customer?

Accepted Answer

A)  Use Priority Optimization to enable service levels for workloads. 
B)  Use Adaptive Optimization to optimize service levels autonomically. 
C)  Use Dynamic Optimization to automatically manage quality of service. 
D)  Use Virtual Domains to automatically set multi-tenant policies. 
A)  Use Priority Optimization to enable service levels for workloads. 
B)  Use Adaptive Optimization to optimize service levels autonomically. 
C)  Use Dynamic Optimization to automatically manage quality of service. 
D)  Use Virtual Domains to automatically set multi-tenant policies.

Question 8

A customer needs to serve 40 TB via file protocols including SMB and FTP to a board range of client operating systems in one location. Security protocols dictate that data must be encrypted with FIPS 140-2 compliance. Which HPE storage solution should you recommend?

Accepted Answer

A)  HPE 3PAR 8200 using self-encrypting drives with HPE 3PAR File Persona. 
B)  HPE MSA 2052 Storage with HPE StoreEasy 3850Gateway 
C)  HPE XP7 Storage with Encryption Ready Disk Adapters 
D)  HPE StoreOnce 5500 with Data in Flight encryption 
A)  HPE 3PAR 8200 using self-encrypting drives with HPE 3PAR File Persona. 
B)  HPE MSA 2052 Storage with HPE StoreEasy 3850Gateway 
C)  HPE XP7 Storage with Encryption Ready Disk Adapters 
D)  HPE StoreOnce 5500 with Data in Flight encryption

Question 9

A customer asks for a 50 TB disk-based backup solution with deduplication. They also need additional storage for test/dev purposes. Which single HPE storage platform can you present to the customer that will meet both of their needs?

Accepted Answer

A)  HPE Nimble SF series 
B)  HPE StoreEasy Gateway 
C)  HPE StoreOnce 
D)  HPE Nimble CS series 
A)  HPE Nimble SF series 
B)  HPE StoreEasy Gateway 
C)  HPE StoreOnce 
D)  HPE Nimble CS series

Question 10

You need to add SSD drives to a production HPE 3PAR StoreServ array configured with Adaptive Flash Cache (AFC). What do you need to consider?

Accepted Answer

A)  Online expansion is not supported if the AFC is running in simulation mode. 
B)  System performance might be affected during activation of the additional resources for AFC. 
C)  The system will automatically re-balance to use the additional resources for AFC. 
D)  The RAID configuration for the SSD drives might need adjustment if you want to use them for AFC. 
A)  Online expansion is not supported if the AFC is running in simulation mode. 
B)  System performance might be affected during activation of the additional resources for AFC. 
C)  The system will automatically re-balance to use the additional resources for AFC. 
D)  The RAID configuration for the SSD drives might need adjustment if you want to use them for AFC.

Question 11

Refer to the exhibit.   A storage integrator is planning to map an HPE StoreServ virtual volume to a server. Which tool can be used to gather required information, such as WWNs of the server, for exporting the volume?

Accepted Answer

A)  HPE 3PAR PowerShell cmdlets 
B)  HPE 3PAR Host Explorer 
C)  HPE 3PAR CLI 
D)  Multipath I/O parameters 
A)  HPE 3PAR PowerShell cmdlets 
B)  HPE 3PAR Host Explorer 
C)  HPE 3PAR CLI 
D)  Multipath I/O parameters

Question 12

You are advising a customer on a new backup strategy to deploy HPE StoreOnce. What should you recommend to ensure the best storage utilization and performance?

Accepted Answer

A)  consolidate activity windows for housekeeping tasks 
B)  size solution for a single backup device 
C)  combine management and backup Ethernet traffic 
D)  use separate backup targets for different data types 
A)  consolidate activity windows for housekeeping tasks 
B)  size solution for a single backup device 
C)  combine management and backup Ethernet traffic 
D)  use separate backup targets for different data types

Question 13

Refer to the exhibit.   A storage integrator is deploying an HPE StoreOnce VSA. Which command can be used to find available storage capacity before it can be added in the StoreOnce console?

Accepted Answer

A)  hardware setup storage 
B)  hardware run setup 
C)  hardware discover storage 
D)  hardware discover disks 
A)  hardware setup storage 
B)  hardware run setup 
C)  hardware discover storage 
D)  hardware discover disks

Question 14

An HPE StoreVirtual 3200 system consists of 19x 1.2 TB Drives in a RAID5 with a capacity level of 75%. The network is built with four HPE FlexFabric 5900 switches. The customer complained about performance challenges with the given configuration, and the administrator identified the drive configuration as a bottleneck. A performance analysis shows latencies above 60ms. Installation of the systems was done by best practices. Which actions should be performed to solve these issues? (Choose two.)

Accepted Answer

A)  Advise additional tiering licenses. 
B)  Change RAID set to RAID 1 on both systems. 
C)  Offer SSD drives for tiering purposes and a performance boost. 
D)  Verify that a minimum of 4 RAID sets are built for optimal performance. 
E)  Set the bonding policy to ALB on both systems. 
A)  Advise additional tiering licenses. 
B)  Change RAID set to RAID 1 on both systems. 
C)  Offer SSD drives for tiering purposes and a performance boost. 
D)  Verify that a minimum of 4 RAID sets are built for optimal performance. 
E)  Set the bonding policy to ALB on both systems.

Question 15

Which software feature should an HPE 3PAR StoreServ 8000 customer use to optimize data protection and recovery, including rapid online recovery for his VMware environment? (Select two.)

Accepted Answer

A)  HPE 3PAR Virtual Copy Software 
B)  HPE StoreOnce Recovery Manager Central for VMware 
C)  HPE 3PAR Security Software Suite 
D)  HPE 3PAR File Persona Software Suite 
E)  HPE 3AR Remote Copy Software 
A)  HPE 3PAR Virtual Copy Software 
B)  HPE StoreOnce Recovery Manager Central for VMware 
C)  HPE 3PAR Security Software Suite 
D)  HPE 3PAR File Persona Software Suite 
E)  HPE 3AR Remote Copy Software

Question 16

A customer needs to store a large amount of unstructured data that must be queried quickly. Which type of storage meets the customer's needs?

Accepted Answer

A)  object 
B)  hash 
C)  file 
D)  flash 
A)  object 
B)  hash 
C)  file 
D)  flash

Question 17

A customer has an HPE 3PAR StoreServ 8000 system with three tiers of SSDs, SAS HDDs, and NL SAS. They are using Adaptive Flash Cache (AFC) and Adaptive Optimization (AO) across all three tiers. They want to implement a new virtual desktop infrastructure and want to use deduplication on the array for this workload. The integrator is in the process of implementing additional SSD drives to prepare the array for the new workload. What must the integrator do to implement this solution?

Accepted Answer

A)  Disable AO to enable deduplication. 
B)  Disable AFC to enable deduplication. 
C)  Configure a new CPG for the SSD tier. 
D)  Create a new Virtual Domain. 
A)  Disable AO to enable deduplication. 
B)  Disable AFC to enable deduplication. 
C)  Configure a new CPG for the SSD tier. 
D)  Create a new Virtual Domain.

Question 18

Which value does an HPE Nimble solution provide in addition to other HPE storage solutions?

Accepted Answer

A)  Flat support pricing for all hardware components 
B)  Tier 1 and tier 2 phone support 
C)  All-inclusive software licensing over 5 years and additional capacity upgrades 
D)  Upfront option for free controller upgrade after 3 years 
A)  Flat support pricing for all hardware components 
B)  Tier 1 and tier 2 phone support 
C)  All-inclusive software licensing over 5 years and additional capacity upgrades 
D)  Upfront option for free controller upgrade after 3 years

Question 19

A customer migrates their infrastructure from a 3 rd party storage to an HPE Nimble environment. During an architecture workshop, you discuss VMvision with the customer and the system engineer. Which statement is correct when implementing performance monitoring using VMvision?

Accepted Answer

A)  SNMP trap service has to be configured to send traps to Infosight and integrate performance data using VMvision. 
B)  VMvision is an agentless integration into Infosight and needs only the vCenter Server Appliance credentials to connect. 
C)  VMware vSphere Storage APIs Array Integration (VAAI) has to be configured to combine storage and VM performance metrics. 
D)  HPE Nimble Service Processor collects relevant per-VM performance data and sends them using SSL port 443 to VMvision. 
A)  SNMP trap service has to be configured to send traps to Infosight and integrate performance data using VMvision. 
B)  VMvision is an agentless integration into Infosight and needs only the vCenter Server Appliance credentials to connect. 
C)  VMware vSphere Storage APIs Array Integration (VAAI) has to be configured to combine storage and VM performance metrics. 
D)  HPE Nimble Service Processor collects relevant per-VM performance data and sends them using SSL port 443 to VMvision.

Question 20

When is write throttling of HDDs invoked?

Accepted Answer

A)  to synchronize speed of writing to multiple solid-state drives combined with rotational drives 
B)  to synchronize speed of writing to multiple solid-state drives 
C)  when drive wearing rate will cause the drive to fail before the warrantied time 
D)  when the power consumption of a drive exceeds the power cap 
A)  to synchronize speed of writing to multiple solid-state drives combined with rotational drives 
B)  to synchronize speed of writing to multiple solid-state drives 
C)  when drive wearing rate will cause the drive to fail before the warrantied time 
D)  when the power consumption of a drive exceeds the power cap

Which file protocols are commonly used in HPE StoreOnce environments? (Choose two.)

What allows volume level data to be copied between an HPE 3PAR and an HPE StoreVirtual VSA?

During a proof-of-concept you need to implement an Inter-Switch-Link (ISL) between two HPE SN6000B SAN switches. Which port mode must be set to enable communication between the switches?

You are planning an upgrade to a customer's existing HPE 3PAR StoreServ 8200 to include 4-port 16Gb FC adapters. The servers are zoned to see the storage via four paths. The customer is concerned about storage availability during the upgrade. Which statement is correct about performing this upgrade?

What does DWPD (drive writes per day) for an SSD indicate?

A customer is concerned about media and transmission errors caused by any component in the I/O stack from the server host bus adapter (HBA) into the HPE 3PAR StoreServ ports. Which feature will address the customer's concern?

A customer is a cloud service provider with infrastructure powered by HPE 3PAR StoreServ 9000. The customer is concerned about their ability to ensure the quality of service and protect their tenants from unpredictable bursts of I/O from other tenants. What should you recommend to your customer?

A customer needs to serve 40 TB via file protocols including SMB and FTP to a board range of client operating systems in one location. Security protocols dictate that data must be encrypted with FIPS 140-2 compliance. Which HPE storage solution should you recommend?

A customer asks for a 50 TB disk-based backup solution with deduplication. They also need additional storage for test/dev purposes. Which single HPE storage platform can you present to the customer that will meet both of their needs?

You need to add SSD drives to a production HPE 3PAR StoreServ array configured with Adaptive Flash Cache (AFC). What do you need to consider?

Refer to the exhibit. A storage integrator is planning to map an HPE StoreServ virtual volume to a server. Which tool can be used to gather required information, such as WWNs of the server, for exporting the volume?

You are advising a customer on a new backup strategy to deploy HPE StoreOnce. What should you recommend to ensure the best storage utilization and performance?

Refer to the exhibit. A storage integrator is deploying an HPE StoreOnce VSA. Which command can be used to find available storage capacity before it can be added in the StoreOnce console?

Which software feature should an HPE 3PAR StoreServ 8000 customer use to optimize data protection and recovery, including rapid online recovery for his VMware environment? (Select two.)

A customer needs to store a large amount of unstructured data that must be queried quickly. Which type of storage meets the customer's needs?

Which value does an HPE Nimble solution provide in addition to other HPE storage solutions?

A customer migrates their infrastructure from a 3 rd party storage to an HPE Nimble environment. During an architecture workshop, you discuss VMvision with the customer and the system engineer. Which statement is correct when implementing performance monitoring using VMvision?

When is write throttling of HDDs invoked?

HPE Storage Solutions

Configuring HPE GreenLake Solutions

Architecting Advanced HPE Server Solutions

Designing HPE Server Solutions

Delta - Designing HPE Server Solutions

Designing HPE Hybrid IT Solutions

Implementing HPE Composable Infrastructure Solutions

Designing HPE Software-Defined Infrastructure Solutions

Building HPE Hybrid IT Solutions

Designing HPE Nimble Solutions

Using HPE OneView

Selling Aruba Products and Solutions

Designing Aruba Solutions

Aruba Certified Design Associate

Aruba Certified ClearPass Professional (ACCP) V6.7

Aruba Certified Mobility Associate Exam

Aruba Certified Mobility Professional Exam

Aruba Certified Switching Associate

Aruba Certified Switching Professional

Aruba Certified Mobility Expert Written Exam

HPE Sales Certified - Aruba Products and Solutions

Filters

Exam 1: Designing Multi-Site HPE Storage Solutions

Which file protocols are commonly used in HPE StoreOnce environments? (Choose two.)

What allows volume level data to be copied between an HPE 3PAR and an HPE StoreVirtual VSA?

During a proof-of-concept you need to implement an Inter-Switch-Link (ISL) between two HPE SN6000B SAN switches. Which port mode must be set to enable communication between the switches?

What does DWPD (drive writes per day) for an SSD indicate?

A customer is concerned about media and transmission errors caused by any component in the I/O stack from the server host bus adapter (HBA) into the HPE 3PAR StoreServ ports. Which feature will address the customer's concern?

A customer is a cloud service provider with infrastructure powered by HPE 3PAR StoreServ 9000. The customer is concerned about their ability to ensure the quality of service and protect their tenants from unpredictable bursts of I/O from other tenants. What should you recommend to your customer?

A customer needs to serve 40 TB via file protocols including SMB and FTP to a board range of client operating systems in one location. Security protocols dictate that data must be encrypted with FIPS 140-2 compliance. Which HPE storage solution should you recommend?

A customer asks for a 50 TB disk-based backup solution with deduplication. They also need additional storage for test/dev purposes. Which single HPE storage platform can you present to the customer that will meet both of their needs?

You need to add SSD drives to a production HPE 3PAR StoreServ array configured with Adaptive Flash Cache (AFC). What do you need to consider?

Refer to the exhibit. A storage integrator is planning to map an HPE StoreServ virtual volume to a server. Which tool can be used to gather required information, such as WWNs of the server, for exporting the volume?

You are advising a customer on a new backup strategy to deploy HPE StoreOnce. What should you recommend to ensure the best storage utilization and performance?

Refer to the exhibit. A storage integrator is deploying an HPE StoreOnce VSA. Which command can be used to find available storage capacity before it can be added in the StoreOnce console?

Which software feature should an HPE 3PAR StoreServ 8000 customer use to optimize data protection and recovery, including rapid online recovery for his VMware environment? (Select two.)

A customer needs to store a large amount of unstructured data that must be queried quickly. Which type of storage meets the customer's needs?

Which value does an HPE Nimble solution provide in addition to other HPE storage solutions?

A customer migrates their infrastructure from a 3 rd party storage to an HPE Nimble environment. During an architecture workshop, you discuss VMvision with the customer and the system engineer. Which statement is correct when implementing performance monitoring using VMvision?

When is write throttling of HDDs invoked?

HPE Storage Solutions

Configuring HPE GreenLake Solutions

Architecting Advanced HPE Server Solutions

Designing HPE Server Solutions

Delta - Designing HPE Server Solutions

Designing HPE Hybrid IT Solutions

Implementing HPE Composable Infrastructure Solutions

Designing HPE Software-Defined Infrastructure Solutions

Building HPE Hybrid IT Solutions

Designing HPE Nimble Solutions

Using HPE OneView

Selling Aruba Products and Solutions

Designing Aruba Solutions

Aruba Certified Design Associate

Aruba Certified ClearPass Professional (ACCP) V6.7

Aruba Certified Mobility Associate Exam

Aruba Certified Mobility Professional Exam

Aruba Certified Switching Associate

Aruba Certified Switching Professional

Aruba Certified Mobility Expert Written Exam

HPE Sales Certified - Aruba Products and Solutions

Filters