Question 1

Which functionality is available in an HPE 3PAR StoreServ 8400 system that is not available in an HPE 3PAR StoreServ 7200 system?

Accepted Answer

A)  Persistent Checksum end-to-end data integrity 
B)  Adaptive Optimization and Dynamic Optimization 
C)  Data at Rest Encryption 
D)  Online Import license 
A)  Persistent Checksum end-to-end data integrity 
B)  Adaptive Optimization and Dynamic Optimization 
C)  Data at Rest Encryption 
D)  Online Import license C

Question 2

The storage integrator is about to add new HPE 3PAR StoreServ 8200 to a customer's existing SAN infrastructure. What must be taken into account when developing a technical action plan?

Accepted Answer

A)  customer change control procedures 
B)  action plan audience 
C)  environmental requirements 
D)  level of support 
A)  customer change control procedures 
B)  action plan audience 
C)  environmental requirements 
D)  level of support C

Question 3

Which storage sizing tool, designed for HPE 3PAR StoreServ, can be used to determine whether customers quality for the Get Thin Guarantee Program?

Accepted Answer

A)  NinjaProtected 
B)  NinjaStars 
C)  NinjaCrawler 
D)  StoreVista 
A)  NinjaProtected 
B)  NinjaStars 
C)  NinjaCrawler 
D)  StoreVista B

Question 4

During a technology workshop, the customer asks about differences between converged and Fibre Channel switches. What would be a benefit of using FlexFabric switches in a fibre channel storage environment?

Accepted Answer

A)  support for six Ethernet and two Fibre Channel, or six Ethernet and two iSCSI or eight Ethernet adapters per server 
B)  zones can be configured for QoS with high, medium, and low priorities within a fabric on a zone by zone basis 
C)  in-flight compression and encryption provides efficient link utilization and security 
D)  support for combining multiple physical switches into one virtual switch with a single IP address 
A)  support for six Ethernet and two Fibre Channel, or six Ethernet and two iSCSI or eight Ethernet adapters per server 
B)  zones can be configured for QoS with high, medium, and low priorities within a fabric on a zone by zone basis 
C)  in-flight compression and encryption provides efficient link utilization and security 
D)  support for combining multiple physical switches into one virtual switch with a single IP address

Question 5

How does the HPE StoreVirtual VSA storage platform scale performance and capacity?

Accepted Answer

A)  eliminates the need for storage controllers 
B)  enables access through multiple protocols 
C)  aggregates all resources into a single storage pool 
D)  recreates storage pools on multiple devices 
A)  eliminates the need for storage controllers 
B)  enables access through multiple protocols 
C)  aggregates all resources into a single storage pool 
D)  recreates storage pools on multiple devices

Question 6

A customer needs to expand an HPE StoreVirtual VSA based cluster with two additional VSA instances. What do you need to consider when designing the new VSA instances?

Accepted Answer

A)  They will require downtime to re-balance the resources within the cluster. 
B)  They must be configured into a new management group. 
C)  They must be of equal or greater capacity than the existing instances in a cluster. 
D)  They can only have equal to or smaller capacity compared to the existing instances. 
A)  They will require downtime to re-balance the resources within the cluster. 
B)  They must be configured into a new management group. 
C)  They must be of equal or greater capacity than the existing instances in a cluster. 
D)  They can only have equal to or smaller capacity compared to the existing instances.

Question 7

A storage administrator has deployed a Windows 2012 R2 server which needs to have a virtual volume exported from an HPE StoreServ 8200. After zoning the host to storage and installing the HPE 3PAR Host Explorer on the server, the administrator is not seeing the server name in SSMC host list when creating a host object. What are two valid options to correct the issue? (Choose two.)

Accepted Answer

A)  Enable host explorer discovery from the HPE 3PAR CLI. 
B)  Execute tpdhostagent push. 
C)  Restart the Host Explorer service. 
D)  Reinstall the Host Explorer service. 
E)  Restart the SSMC service. 
A)  Enable host explorer discovery from the HPE 3PAR CLI. 
B)  Execute tpdhostagent push. 
C)  Restart the Host Explorer service. 
D)  Reinstall the Host Explorer service. 
E)  Restart the SSMC service.

Question 8

What performance benefit is provided by using the HPE StoreVirtual DSM for Microsoft MPIO instead of the standard MPIO?

Accepted Answer

A)  The HPE DSM increases availability and reduces latency and throughput. 
B)  The storage system, which holds a copy of the requested data, services the read I/Os. 
C)  The iSCSI connections are blocked to non-critical nodes in the cluster by default. 
D)  The storage system, which receives a copy of the data, does not service the write I/O. 
A)  The HPE DSM increases availability and reduces latency and throughput. 
B)  The storage system, which holds a copy of the requested data, services the read I/Os. 
C)  The iSCSI connections are blocked to non-critical nodes in the cluster by default. 
D)  The storage system, which receives a copy of the data, does not service the write I/O.

Question 9

Refer to the exhibit.   Which port can be used to connect the HPE MSA 2040 controller to hosts?

Accepted Answer

A)  4 
B)  5 
C)  6 
D)  8 
A)  4 
B)  5 
C)  6 
D)  8

Question 10

After a performance analysis, a customer plants to reorganize his Adaptive Flash Cache (AFC) configuration and wants to raise it from 256GB to 768 GB. Which action is needed to take advantage of the new AFC configuration?

Accepted Answer

A)  Increase the current AFC configuration to reflect the additional space. 
B)  Remove the old AO configuration and recreate a new one. 
C)  Run tunesys after raising the AFC to take advantage of the additional space. 
D)  Remove flash cache for all VVs and then run createflashcache. 
A)  Increase the current AFC configuration to reflect the additional space. 
B)  Remove the old AO configuration and recreate a new one. 
C)  Run tunesys after raising the AFC to take advantage of the additional space. 
D)  Remove flash cache for all VVs and then run createflashcache.

Question 11

A customer currently has a CS1000H and wants to upgrade to a CS3000. What must be considered before upgrading?

Accepted Answer

A)  This upgrade is disruptive and needs planned downtime. 
B)  A capacity upgrade to a fully populated array has to be performed first. 
C)  Timeless storage support is not offered for CS1000H entry-level systems. 
D)  A controller upgrade to a CS1000F has to be performed first. 
A)  This upgrade is disruptive and needs planned downtime. 
B)  A capacity upgrade to a fully populated array has to be performed first. 
C)  Timeless storage support is not offered for CS1000H entry-level systems. 
D)  A controller upgrade to a CS1000F has to be performed first.

Question 12

What factors does a storage integrator need to consider before implementing an Ethernet-based SAN?

Accepted Answer

A)  Data Center Bridging requires supported switches and NICs. 
B)  Remote Direct Memory Access (RDM
A)  support is mandatory for all components. 
C)  Data Center Bridging requires optical fiber cables. 
D)  Remote Direct Memory Access (RDM
A)  requires optical fiber cables. 
A)  Data Center Bridging requires supported switches and NICs. 
B)  Remote Direct Memory Access (RDM
A)  support is mandatory for all components. 
C)  Data Center Bridging requires optical fiber cables. 
D)  Remote Direct Memory Access (RDM
A)  requires optical fiber cables.

Question 13

Which command can be used to display license information on an HPE StoreOnce system?

Accepted Answer

A)  license show 
B)  info license 
C)  license display 
D)  show licenses 
A)  license show 
B)  info license 
C)  license display 
D)  show licenses

Question 14

A customer has the following components installed and running: - HPE 3PAR StoreServ 8400 with two nodes - three SFF drive shelves - FC-based host connections - a mixture of SSDs and SAS HDDs The task is to expand the solution with two nodes and another three SFF drive shelves, as well as SSDs and SAS HDDs. What must be checked at the customer site before beginning the installation?

Accepted Answer

A)  if there is space for the additional three SFF drive shelves adjacent to the existing drive shelves 
B)  if there is space for the second node pair adjacent to the first node pair 
C)  if there is the required number of High Density Active Optical Cables to connect the two node pairs 
D)  if the license for enabling the second node pair is installed before starting the expansion 
A)  if there is space for the additional three SFF drive shelves adjacent to the existing drive shelves 
B)  if there is space for the second node pair adjacent to the first node pair 
C)  if there is the required number of High Density Active Optical Cables to connect the two node pairs 
D)  if the license for enabling the second node pair is installed before starting the expansion

Question 15

A customer asks for an integrated solution for their remote office with All-Flash storage and ease of management. Application-aware replication to their main office is an important requirement. Which HPE solution component should you discuss with the customer first?

Accepted Answer

A)  HPE SimpliVity 380 
B)  HPE MSA 2052 Storage 
C)  HPE Nimble HF series 
D)  HPE 3PAR StoreServ 8200 
A)  HPE SimpliVity 380 
B)  HPE MSA 2052 Storage 
C)  HPE Nimble HF series 
D)  HPE 3PAR StoreServ 8200

Question 16

A customer wants to expand his cascaded B-series based SAN but is concerned about latencies within the SAN backend. You recommend changing the topology to a full mesh. Which switch feature will ensure that the latencies in the backend are at the lowest possible level?

Accepted Answer

A)  LACP 
B)  NPIV 
C)  FSPF 
D)  VSF 
A)  LACP 
B)  NPIV 
C)  FSPF 
D)  VSF

Question 17

A customer runs several HPE 3PAR StoreServ systems in their environment using Data at Rest Encryption. The customer needs to add an HPE 3PAR StoreServ 8000 system to the storage pool and an external key manager for all systems. What is a requirement for this solution?

Accepted Answer

A)  HPE ESKM FIPS mode must be disabled by the Administrator. 
B)  Boot devices of the existing HPE 3PAR StoreServ arrays must be replaced with self-encrypting drives. 
C)  Data on the existing HPE 3PAR StoreServ arrays must be decrypted and re-encrypted with new keys. 
D)  All drives of the new HPE 3PAR StoreServ array must be self-encrypting. 
A)  HPE ESKM FIPS mode must be disabled by the Administrator. 
B)  Boot devices of the existing HPE 3PAR StoreServ arrays must be replaced with self-encrypting drives. 
C)  Data on the existing HPE 3PAR StoreServ arrays must be decrypted and re-encrypted with new keys. 
D)  All drives of the new HPE 3PAR StoreServ array must be self-encrypting.

Question 18

A storage integrator is planning an HPE MSA Storage installation. What needs to be taken into consideration when implementing a SAS connected model?

Accepted Answer

A)  SAS expander or a SAS switch is supported only with non-redundant paths. 
B)  SAS expander or a SAS switch is required if eight or more servers are connected. 
C)  Up to four servers with redundant paths can be connected. 
D)  Up to four servers with non-redundant paths can be connected. 
A)  SAS expander or a SAS switch is supported only with non-redundant paths. 
B)  SAS expander or a SAS switch is required if eight or more servers are connected. 
C)  Up to four servers with redundant paths can be connected. 
D)  Up to four servers with non-redundant paths can be connected.

Question 19

A storage integrator is validating an HPE 3PAR StoreServ implementation. The integrator created a volume in the HPE 3PAR StoreServ Management Console (SSMC) and needs to verify read/write access from a Linux operating system. Which steps are part of the verification process? (Choose two.)

Accepted Answer

A)  Select Hosts under the Servers menu section, and click Create server. 
B)  Select the volume in the Virtual Volumes section. and click Map Volume in the Actions menu. 
C)  Select the host in the Servers section, and click Add permission in the Actions menu. 
D)  Select the volume in the Virtual Volumes section, and click Export in the Actions menu. 
E)  Select Hosts in the Block Persona menu section, and click Create host. 
A)  Select Hosts under the Servers menu section, and click Create server. 
B)  Select the volume in the Virtual Volumes section. and click Map Volume in the Actions menu. 
C)  Select the host in the Servers section, and click Add permission in the Actions menu. 
D)  Select the volume in the Virtual Volumes section, and click Export in the Actions menu. 
E)  Select Hosts in the Block Persona menu section, and click Create host.

Question 20

Which statement is correct when discussing the RAID layout of an HPE Nimble HF-series storage system?

Accepted Answer

A)  RAID 6 triple parity is set up -21 data drives are used for RAID stripes. 
B)  RAID 6 triple parity is set up -18 data drives are used for RAID stripes. 
C)  RAID 6 or RAID 1 can be set up -24 data drives are used for RAID stripes. 
D)  RAID 6 or RAID 1 can be set up -18 data drives are used for RAID stripes. 
A)  RAID 6 triple parity is set up -21 data drives are used for RAID stripes. 
B)  RAID 6 triple parity is set up -18 data drives are used for RAID stripes. 
C)  RAID 6 or RAID 1 can be set up -24 data drives are used for RAID stripes. 
D)  RAID 6 or RAID 1 can be set up -18 data drives are used for RAID stripes.

Which functionality is available in an HPE 3PAR StoreServ 8400 system that is not available in an HPE 3PAR StoreServ 7200 system?

The storage integrator is about to add new HPE 3PAR StoreServ 8200 to a customer's existing SAN infrastructure. What must be taken into account when developing a technical action plan?

Which storage sizing tool, designed for HPE 3PAR StoreServ, can be used to determine whether customers quality for the Get Thin Guarantee Program?

During a technology workshop, the customer asks about differences between converged and Fibre Channel switches. What would be a benefit of using FlexFabric switches in a fibre channel storage environment?

How does the HPE StoreVirtual VSA storage platform scale performance and capacity?

A customer needs to expand an HPE StoreVirtual VSA based cluster with two additional VSA instances. What do you need to consider when designing the new VSA instances?

What performance benefit is provided by using the HPE StoreVirtual DSM for Microsoft MPIO instead of the standard MPIO?

Refer to the exhibit. Which port can be used to connect the HPE MSA 2040 controller to hosts?

After a performance analysis, a customer plants to reorganize his Adaptive Flash Cache (AFC) configuration and wants to raise it from 256GB to 768 GB. Which action is needed to take advantage of the new AFC configuration?

A customer currently has a CS1000H and wants to upgrade to a CS3000. What must be considered before upgrading?

What factors does a storage integrator need to consider before implementing an Ethernet-based SAN?

Which command can be used to display license information on an HPE StoreOnce system?

A customer asks for an integrated solution for their remote office with All-Flash storage and ease of management. Application-aware replication to their main office is an important requirement. Which HPE solution component should you discuss with the customer first?

A customer wants to expand his cascaded B-series based SAN but is concerned about latencies within the SAN backend. You recommend changing the topology to a full mesh. Which switch feature will ensure that the latencies in the backend are at the lowest possible level?

A customer runs several HPE 3PAR StoreServ systems in their environment using Data at Rest Encryption. The customer needs to add an HPE 3PAR StoreServ 8000 system to the storage pool and an external key manager for all systems. What is a requirement for this solution?

A storage integrator is planning an HPE MSA Storage installation. What needs to be taken into consideration when implementing a SAS connected model?

A storage integrator is validating an HPE 3PAR StoreServ implementation. The integrator created a volume in the HPE 3PAR StoreServ Management Console (SSMC) and needs to verify read/write access from a Linux operating system. Which steps are part of the verification process? (Choose two.)

Which statement is correct when discussing the RAID layout of an HPE Nimble HF-series storage system?

HPE Storage Solutions

Configuring HPE GreenLake Solutions

Architecting Advanced HPE Server Solutions

Designing HPE Server Solutions

Delta - Designing HPE Server Solutions

Designing HPE Hybrid IT Solutions

Implementing HPE Composable Infrastructure Solutions

Designing HPE Software-Defined Infrastructure Solutions

Building HPE Hybrid IT Solutions

Designing HPE Nimble Solutions

Using HPE OneView

Selling Aruba Products and Solutions

Designing Aruba Solutions

Aruba Certified Design Associate

Aruba Certified ClearPass Professional (ACCP) V6.7

Aruba Certified Mobility Associate Exam

Aruba Certified Mobility Professional Exam

Aruba Certified Switching Associate

Aruba Certified Switching Professional

Aruba Certified Mobility Expert Written Exam

HPE Sales Certified - Aruba Products and Solutions

Filters

Exam 1: Designing Multi-Site HPE Storage Solutions

Which functionality is available in an HPE 3PAR StoreServ 8400 system that is not available in an HPE 3PAR StoreServ 7200 system?

The storage integrator is about to add new HPE 3PAR StoreServ 8200 to a customer's existing SAN infrastructure. What must be taken into account when developing a technical action plan?

Which storage sizing tool, designed for HPE 3PAR StoreServ, can be used to determine whether customers quality for the Get Thin Guarantee Program?

During a technology workshop, the customer asks about differences between converged and Fibre Channel switches. What would be a benefit of using FlexFabric switches in a fibre channel storage environment?

How does the HPE StoreVirtual VSA storage platform scale performance and capacity?

A customer needs to expand an HPE StoreVirtual VSA based cluster with two additional VSA instances. What do you need to consider when designing the new VSA instances?

What performance benefit is provided by using the HPE StoreVirtual DSM for Microsoft MPIO instead of the standard MPIO?

Refer to the exhibit. Which port can be used to connect the HPE MSA 2040 controller to hosts?

After a performance analysis, a customer plants to reorganize his Adaptive Flash Cache (AFC) configuration and wants to raise it from 256GB to 768 GB. Which action is needed to take advantage of the new AFC configuration?

A customer currently has a CS1000H and wants to upgrade to a CS3000. What must be considered before upgrading?

What factors does a storage integrator need to consider before implementing an Ethernet-based SAN?

Which command can be used to display license information on an HPE StoreOnce system?

A customer asks for an integrated solution for their remote office with All-Flash storage and ease of management. Application-aware replication to their main office is an important requirement. Which HPE solution component should you discuss with the customer first?

A customer wants to expand his cascaded B-series based SAN but is concerned about latencies within the SAN backend. You recommend changing the topology to a full mesh. Which switch feature will ensure that the latencies in the backend are at the lowest possible level?

A customer runs several HPE 3PAR StoreServ systems in their environment using Data at Rest Encryption. The customer needs to add an HPE 3PAR StoreServ 8000 system to the storage pool and an external key manager for all systems. What is a requirement for this solution?

A storage integrator is planning an HPE MSA Storage installation. What needs to be taken into consideration when implementing a SAS connected model?

A storage integrator is validating an HPE 3PAR StoreServ implementation. The integrator created a volume in the HPE 3PAR StoreServ Management Console (SSMC) and needs to verify read/write access from a Linux operating system. Which steps are part of the verification process? (Choose two.)

Which statement is correct when discussing the RAID layout of an HPE Nimble HF-series storage system?

HPE Storage Solutions

Configuring HPE GreenLake Solutions

Architecting Advanced HPE Server Solutions

Designing HPE Server Solutions

Delta - Designing HPE Server Solutions

Designing HPE Hybrid IT Solutions

Implementing HPE Composable Infrastructure Solutions

Designing HPE Software-Defined Infrastructure Solutions

Building HPE Hybrid IT Solutions

Designing HPE Nimble Solutions

Using HPE OneView

Selling Aruba Products and Solutions

Designing Aruba Solutions

Aruba Certified Design Associate

Aruba Certified ClearPass Professional (ACCP) V6.7

Aruba Certified Mobility Associate Exam

Aruba Certified Mobility Professional Exam

Aruba Certified Switching Associate

Aruba Certified Switching Professional

Aruba Certified Mobility Expert Written Exam

HPE Sales Certified - Aruba Products and Solutions

Filters