Question 1

When you troubleshoot H.323 call setup, which message informs you that the called party is being notified about the call?

Accepted Answer

A)  ALERTING 
B)  PROCEEDING 
C)  CONNECT 
D)  RINGING 
A)  ALERTING 
B)  PROCEEDING 
C)  CONNECT 
D)  RINGING

Question 2

Refer to the exhibit. An engineer is troubleshooting an issue where inbound calls are failing after they are transferred. The provider reports that UPDATE is not supported, and this is causing the calls to fail. Which command should resolve this issue?

Accepted Answer

A)  no midcall-signaling passthru 
B)  no update-callerid 
C)  no contact-passing 
D)  rel1xx require "100rel" 
A)  no midcall-signaling passthru 
B)  no update-callerid 
C)  no contact-passing 
D)  rel1xx require "100rel"

Question 3

Refer to the exhibit. An administrator is troubleshooting a situation where a call placed from a phone registered to Cisco Unified Communications Manager does not complete. The administrator wants to use the Dialed Number Analyzer on Cisco Unified CM to check which translation pattern the call is matching. However, when logging in to Cisco Unified Serviceability there is no option for Dialed Number Analyzer under the tool menu. Which two steps must be performed to resolve this issue? (Choose two.)

Accepted Answer

A)  Restart the subscriber 
B)  Activate the Cisco Extended Functions service. 
C)  Activate the Cisco CallManager service. 
D)  Activate the Cisco Dialed Number Analyzer service. 
E)  Activate the Cisco Dialed Number Analyzer Server service. 
A)  Restart the subscriber 
B)  Activate the Cisco Extended Functions service. 
C)  Activate the Cisco CallManager service. 
D)  Activate the Cisco Dialed Number Analyzer service. 
E)  Activate the Cisco Dialed Number Analyzer Server service.

Question 4

CollabCorp is a global company with two clusters, emea.collab.corp and apac.collab.corp. URI dialing is implemented and working in each cluster. The company configured routing between clusters to make inter-cluster calls via URI, but this is not working as expected. Which two configuration elements should be checked to resolve this issue? (Choose two.)

Accepted Answer

A)  intercluster trunk 
B)  calling search space and partition 
C)  SIP route pattern 
D)  directory URI partition 
E)  SIP trunk 
A)  intercluster trunk 
B)  calling search space and partition 
C)  SIP route pattern 
D)  directory URI partition 
E)  SIP trunk

Question 5

An administrator is troubleshooting call failures on an H323 gateway via the CLI. To see signaling for media and call setup, which debug must the Administrator turn on?

Accepted Answer

A)  debug H323 messages 
B)  debug H225 asn1 
C)  debug H246 asn 1 
D)  debug H225 media 
E)  debug H323 asn 1 
A)  debug H323 messages 
B)  debug H225 asn1 
C)  debug H246 asn 1 
D)  debug H225 media 
E)  debug H323 asn 1

Question 6

Which configuration element of a hunt group allows for changing Calling Party Transformations settings?

Accepted Answer

A)  line group 
B)  hunt pilot 
C)  route group 
D)  hunt list 
A)  line group 
B)  hunt pilot 
C)  route group 
D)  hunt list

Question 7

When locations-based Call Admission Control denies the call, which two masks can AAR apply when routing the call through the PSTN? (Choose two.)

Accepted Answer

A)  AAR destination mask 
B)  called party transform mask 
C)  external phone number mask 
D)  +E.164 alternate number mask 
E)  enterrise alternate number mask 
A)  AAR destination mask 
B)  called party transform mask 
C)  external phone number mask 
D)  +E.164 alternate number mask 
E)  enterrise alternate number mask

Question 8

Where is the dtmf-relay command configured on Cisco Unified Border Element?

Accepted Answer

A)  in the voice-class VoIP configuration 
B)  in the VoIP dial peer 
C)  in global SIP configuration 
D)  in the VoIP or POTS dial peers 
A)  in the voice-class VoIP configuration 
B)  in the VoIP dial peer 
C)  in global SIP configuration 
D)  in the VoIP or POTS dial peers

Question 9

Refer to the exhibit. An administrator is troubleshooting a situation where a call placed from a phone registered to Cisco UCM does not complete. The administrator wants to use the Dialed Number Analyzer on Cisco UCM to check which translation pattern the call is matching. However, when logging in to Cisco Unified Serviceability, there is no option for Dialed Number Analyzer under the tool menu. Which two steps should be taken to resolve this issue? (Choose two.)

Accepted Answer

A)  Restart the subscriber. 
B)  Activate the Cisco Extended Functions service. 
C)  Activate the Cisco CallManager service. 
D)  Activate the Cisco Dialed Number Analyzer service. 
E)  Activate the Cisco Dialed Number Analyzer Server service. 
A)  Restart the subscriber. 
B)  Activate the Cisco Extended Functions service. 
C)  Activate the Cisco CallManager service. 
D)  Activate the Cisco Dialed Number Analyzer service. 
E)  Activate the Cisco Dialed Number Analyzer Server service.

Question 10

An engineer must configure call queuing under a Hunt Pilot. After the engineer receives the audio file that will be played to callers during queuing, which two steps should be taken to complete the configuration? (Choose two.)

Accepted Answer

A)  Assign the uploaded audio file to "Network Hold MOH Source & Announcements" under Hunt Pilot's Queuing section. 
B)  Upload the audio file in "TFTP File Management" via OS Administration GUI. 
C)  Assign the uploaded audio file to the hunting Line Group member's "User Hold MOH Audio Source". 
D)  Assign the uploaded audio file to the hunting Line Group member's "Network Hold MOH Audio Source". 
E)  Upload the audio file in "MOH Audio File Management" via CM Administration GUI. 
A)  Assign the uploaded audio file to "Network Hold MOH Source & Announcements" under Hunt Pilot's Queuing section. 
B)  Upload the audio file in "TFTP File Management" via OS Administration GUI. 
C)  Assign the uploaded audio file to the hunting Line Group member's "User Hold MOH Audio Source". 
D)  Assign the uploaded audio file to the hunting Line Group member's "Network Hold MOH Audio Source". 
E)  Upload the audio file in "MOH Audio File Management" via CM Administration GUI.

Question 11

Cisco UCM has 100,000 entries in the database learned through the ILS Service. Parameter ILS Max Number of Learned Objects in Database value is set to 100,000. What will happen to learned data when the service parameter value is reduced to 50,000?

Accepted Answer

A)  Cisco UCM does not write additional ILS learned objects to the database and will delete the last 50,000 entries learned to keep it to the service parameter value. 
B)  Cisco UCM does not write additional ILS learned objects to the database and keeps the existing database entries. 
C)  Cisco UCM will overwrite an entry for newly learned data and keep the parameter value at 100,000. 
D)  Cisco UCM does not write additional ILS learned objects to the database and will delete the first 50,000 entries learned to keep it to the service parameter value. 
A)  Cisco UCM does not write additional ILS learned objects to the database and will delete the last 50,000 entries learned to keep it to the service parameter value. 
B)  Cisco UCM does not write additional ILS learned objects to the database and keeps the existing database entries. 
C)  Cisco UCM will overwrite an entry for newly learned data and keep the parameter value at 100,000. 
D)  Cisco UCM does not write additional ILS learned objects to the database and will delete the first 50,000 entries learned to keep it to the service parameter value.

Question 12

Refer to the exhibit. Within the North American Numbering Plan, gateways located in Ottawa, Canada and marked as "YOW" are assigned to the Calling Party Transformation CSS NANP_CgPTP, which contains partition NANP_calling_xforms. What is the calling-party number and the numbering type if the calling user +1613-555-1234 dials the number?

Accepted Answer

A)  calling number 613-555-1234 and numbering type "subscriber" 
B)  calling number 011-1-613-555-1234 and numbering type "subscriber" 
C)  calling number 011613-555-1234 and numbering type "international" 
D)  calling number 613-555-1234 and numbering type "national" 
A)  calling number 613-555-1234 and numbering type "subscriber" 
B)  calling number 011-1-613-555-1234 and numbering type "subscriber" 
C)  calling number 011613-555-1234 and numbering type "international" 
D)  calling number 613-555-1234 and numbering type "national"

Question 13

An engineer is configuring a call park feature in Cisco Unified Communications Manager Express. Which command does the engineer use to ensure that the call is reverted to the user after 60 seconds?

Accepted Answer

A)  R2(config-ephone-dn)# park reservation-group 60 R2(config-ephone-dn)# park reservation-group 60 
B)  R2(config-ephone-dn)# park-slot timeout 60 limit 2 recall alternate 3002 park-slot timeout 60 limit 2 recall alternate 3002 
C)  R2(config-ephone-dn)# park reservation-group 1 park reservation-group 1 
D)  R2(config-ephone-dn)# park-slot timeout 30 limit 2 recall alternate 3002 park-slot timeout 30 limit 2 recall alternate 3002 
A)  R2(config-ephone-dn)# park reservation-group 60 R2(config-ephone-dn)# park reservation-group 60 
B)  R2(config-ephone-dn)# park-slot timeout 60 limit 2 recall alternate 3002 park-slot timeout 60 limit 2 recall alternate 3002 
C)  R2(config-ephone-dn)# park reservation-group 1 park reservation-group 1 
D)  R2(config-ephone-dn)# park-slot timeout 30 limit 2 recall alternate 3002 park-slot timeout 30 limit 2 recall alternate 3002

Question 14

Calls to a particular extension are not routing to voicemail. The user reaches the voicemail system from the handset by pressing the Messages button. Which configuration parameter causes this problem?

Accepted Answer

A)  The voicemail pilot number for call forwarding is missing from the ephone-dn. 
B)  The voicemail pilot number is missing from the telephony service configuration on Cisco UCME. 
C)  The voicemail pilot number is missing from the call handling on Cisco Unity Express. 
D)  The voicemail pilot number for call forwarding is missing from the ephone. 
A)  The voicemail pilot number for call forwarding is missing from the ephone-dn. 
B)  The voicemail pilot number is missing from the telephony service configuration on Cisco UCME. 
C)  The voicemail pilot number is missing from the call handling on Cisco Unity Express. 
D)  The voicemail pilot number for call forwarding is missing from the ephone.

Question 15

Cisco SIP IP telephony is implemented on two floors of your company. Afterward, users report intermittent voice issues in calls established between floors. All calls are established, and sometimes they work well, but sometimes there is one-way audio or no audio. It is determined that there is a firewall between the floors, and the administrator reports that it is allowing SIP signaling and UDP ports from 20000 to 22000 bidirectionally. What are two solutions for this issue? (Choose two.)

Accepted Answer

A)  Go to the SIP profile assigned to these IP phones in Cisco UCM and change the range of media ports to 16384-32767 
B)  Ask the firewall administrator to change the ports to TCP. 
C)  Ask the firewall administrator to change the range of UDP ports to 16384-32767. 
D)  Go to the SIP profile assigned to these IP phones in Cisco UCM and change the range of media ports to 20000-22000. 
E)  Go to System Parameters in Cisco UCM and change the range of media ports to 20000-22000. 
A)  Go to the SIP profile assigned to these IP phones in Cisco UCM and change the range of media ports to 16384-32767 
B)  Ask the firewall administrator to change the ports to TCP. 
C)  Ask the firewall administrator to change the range of UDP ports to 16384-32767. 
D)  Go to the SIP profile assigned to these IP phones in Cisco UCM and change the range of media ports to 20000-22000. 
E)  Go to System Parameters in Cisco UCM and change the range of media ports to 20000-22000.

Question 16

Refer to the exhibit. How many maximum hops can an ILS updarte traverse?

Accepted Answer

A)  3 
B)  6 
C)  9 
D)  12 
A)  3 
B)  6 
C)  9 
D)  12

Question 17

When locations-based Call Admission Control denies the call, which two masks can AAR apply when routing the call through the PSTN? (Choose two.)

Accepted Answer

A)  AAR destination mask 
B)  called party transform mask 
C)  external phone number mask 
D)  +E.164 alternate number mask 
E)  enterprise alternate number mask 
A)  AAR destination mask 
B)  called party transform mask 
C)  external phone number mask 
D)  +E.164 alternate number mask 
E)  enterprise alternate number mask

Question 18

An engineer must configure a secure SIP trunk with a remote provider, with a specific requirement to use port 5065 for inbound and otubound traffic. Which two items must be configured to complete this configuration? (Choose two.)

Accepted Answer

A)  Incoming Port in SIP Information section of the SIP Trunk configuration. 
B)  Incoming Port in Security Information of the SIP Profile configuration. 
C)  Destination Port in SIP Information section of the SIP Trunk configuration 
D)  Incoming Port in SIP Trunk Security Profile configuration 
E)  Destination Port in SIP Trunk Security Profile configuration 
A)  Incoming Port in SIP Information section of the SIP Trunk configuration. 
B)  Incoming Port in Security Information of the SIP Profile configuration. 
C)  Destination Port in SIP Information section of the SIP Trunk configuration 
D)  Incoming Port in SIP Trunk Security Profile configuration 
E)  Destination Port in SIP Trunk Security Profile configuration

Question 19

Which two types of distribution algorithm are within a line group? (Choose two.)

Accepted Answer

A)  random 
B)  circular 
C)  highest preference 
D)  top down 
E)  bottom up 
A)  random 
B)  circular 
C)  highest preference 
D)  top down 
E)  bottom up

Question 20

A user reports that when they attempt to log out from the Cisco Extension Mobility service by pressing the services button, they cannot log out. What is cause of this issue?

Accepted Answer

A)  The Cisco Extension Mobility service has not been configured on the phone. 
B)  Network latency should be checked since there might be a significant delay between the button being pressed and it being recognized by the Cisco Extension Mobility service. 
C)  The user device profile has not been assigned to the user. 
D)  The user device profile is not subscribed to the Cisco Extension Mobility service. 
A)  The Cisco Extension Mobility service has not been configured on the phone. 
B)  Network latency should be checked since there might be a significant delay between the button being pressed and it being recognized by the Cisco Extension Mobility service. 
C)  The user device profile has not been assigned to the user. 
D)  The user device profile is not subscribed to the Cisco Extension Mobility service.

Exam 30: Implementing Cisco Collaboration Cloud and Edge Solutions

When you troubleshoot H.323 call setup, which message informs you that the called party is being notified about the call?

Refer to the exhibit. An engineer is troubleshooting an issue where inbound calls are failing after they are transferred. The provider reports that UPDATE is not supported, and this is causing the calls to fail. Which command should resolve this issue?

An administrator is troubleshooting call failures on an H323 gateway via the CLI. To see signaling for media and call setup, which debug must the Administrator turn on?

Which configuration element of a hunt group allows for changing Calling Party Transformations settings?

When locations-based Call Admission Control denies the call, which two masks can AAR apply when routing the call through the PSTN? (Choose two.)

Where is the dtmf-relay command configured on Cisco Unified Border Element?

An engineer must configure call queuing under a Hunt Pilot. After the engineer receives the audio file that will be played to callers during queuing, which two steps should be taken to complete the configuration? (Choose two.)

Cisco UCM has 100,000 entries in the database learned through the ILS Service. Parameter ILS Max Number of Learned Objects in Database value is set to 100,000. What will happen to learned data when the service parameter value is reduced to 50,000?

An engineer is configuring a call park feature in Cisco Unified Communications Manager Express. Which command does the engineer use to ensure that the call is reverted to the user after 60 seconds?

Calls to a particular extension are not routing to voicemail. The user reaches the voicemail system from the handset by pressing the Messages button. Which configuration parameter causes this problem?

Refer to the exhibit. How many maximum hops can an ILS updarte traverse?

When locations-based Call Admission Control denies the call, which two masks can AAR apply when routing the call through the PSTN? (Choose two.)

An engineer must configure a secure SIP trunk with a remote provider, with a specific requirement to use port 5065 for inbound and otubound traffic. Which two items must be configured to complete this configuration? (Choose two.)

Which two types of distribution algorithm are within a line group? (Choose two.)

A user reports that when they attempt to log out from the Cisco Extension Mobility service by pressing the services button, they cannot log out. What is cause of this issue?

Supporting Cisco Data Center System Devices (DCTECH)

Cisco Certified Technician Routing & Switching (RSTECH)

Understanding Cisco Cybersecurity Operations Fundamentals (CBROPS)

Cisco Certified Network Associate (CCNA)

Managing Industrial Networks with Cisco Networking Technologies (IMINS)

DevNet Associate (DEVASC)

Conducting Forensic Analysis and Incident Response Using Cisco CyberOps Technologies (CBRFIR)

Implementing Cisco Enterprise Advanced Routing and Services (ENARSI)

Implementing Cisco SD-WAN Solutions (ENSDWI)

Designing Cisco Enterprise Networks (ENSLD)

Designing Cisco Enterprise Wireless Networks (300-425 ENWLSD)

Implementing Cisco Enterprise Wireless Networks (300-430 ENWLSI)

Automating Cisco Enterprise Solutions (ENAUTO)

Implementing Cisco Service Provider Advanced Routing Solutions (SPRI)

Implementing Cisco Service Provider VPN Services (SPVI)

Designing Cisco Data Center Infrastructure (DCID)

Troubleshooting Cisco Data Center Infrastructure (DCIT)

Implementing Cisco Application Centric Infrastructure (DCACI)

Configuring Cisco MDS 9000 Series Switches (DCSAN)

Implementing Cisco Application Centric Infrastructure - Advanced

Automating Cisco Data Center Solutions (DCAUTO)

Securing Networks with Cisco Firepower (300-710 SNCF)

Implementing and Configuring Cisco Identity Services Engine (300-715 SISE)

Securing Email with Cisco Email Security Appliance (300-720 SESA)

Securing the Web with Cisco Web Security Appliance (300-725 SWSA)

Implementing Secure Solutions with Virtual Private Networks (SVPN 300-730)

Automating Cisco Security Solutions (SAUTO)

Implementing Cisco Collaboration Applications (CLICA)

Implementing Cisco Advanced Call Control and Mobility Services (CLASSM)

Implementing Cisco Collaboration Conferencing

Automating Cisco Collaboration Solutions (CLAUTO)

Implementing DevOps Solutions and Practices using Cisco Platforms (DEVOPS)

Developing Solutions Using Cisco IoT and Edge Platforms (DEVIOT)

Developing Applications for Cisco Webex and Webex Devices (DEVWBX)

Performing CyberOps Using Core Security Technologies (CBRCOR)

Implementing Cisco Enterprise Network Core Technologies (ENCOR)

Implementing and Operating Cisco Service Provider Network Core Technologies (SPCOR)

Implementing and Operating Cisco Data Center Core Technologies (DCCOR)

Implementing and Operating Cisco Security Core Technologies

Implementing Cisco Collaboration Core Technologies (CLCOR)

Developing Applications using Cisco Core Platforms and APIs (DEVCOR)

CCDE Design Written

Deploying Cisco Unified Contact Center Express

Cisco Meraki Solutions Specialist

Securing Cisco Networks with Sourcefire FireAMP Endpoints

Designing Cisco Unified Contact Center Enterprise (UCCED)

Implementing and Supporting Cisco Unified Contact Center Enterprise (UCCEIS)

Cisco Collaboration SaaS Authorization Exam

Cisco Security Architecture for System Engineers

Adopting The Cisco Business Architecture Approach (DTBAA)

Cisco Customer Success Manager (CSM)

Mastering The Cisco Business Architecture Discipline (DTBAD)

Filters