Question 1

Survivability requires a minimum rating of _________ to ensure the functional use of the system during a fire.

Accepted Answer

A)  1 hour 
B)  1.5 hours 
C)  2 hours 
D)  4 hours 
A)  1 hour 
B)  1.5 hours 
C)  2 hours 
D)  4 hours C

Question 2

To ensure survivability, the type of cable required is _________.

Accepted Answer

A)  MI or CI cable 
B)  Plenum cable 
C)  Multipurpose cable 
D)  Class 1 rated cable 
A)  MI or CI cable 
B)  Plenum cable 
C)  Multipurpose cable 
D)  Class 1 rated cable A

Question 3

Fire alarm circuits must be clearly labeled at every junction and terminal connection.

Accepted Answer

A) True 
 B)False  True

Question 4

Single conductor sizes for a power-limited fire alarm circuit cannot be smaller than ____________.

Accepted Answer

A)  16 AWG 
B)  18 AWG 
C)  22 AWG 
D)  26 AWG 
A)  16 AWG 
B)  18 AWG 
C)  22 AWG 
D)  26 AWG

Question 5

Emergency telephone must be part of the main telephone system.

Accepted Answer

A) True 
 B)False

Question 6

The power source for a nonpower-limited fire alarm system cannot output voltages greater than ________

Accepted Answer

A)  150V 
B)  300V 
C)  600V 
D)  1000V 
A)  150V 
B)  300V 
C)  600V 
D)  1000V

Question 7

End of line devices are required by addressable fire alarm systems.

Accepted Answer

A) True 
 B)False

Question 8

Heat detectors are considered to be life-safety devices.

Accepted Answer

A) True 
 B)False

Question 9

What statement about line seizure is not true?

Accepted Answer

A)  Achieved through an RJ-31X connector 
B)  The house phone will continue to operate 
C)  Cellular phone may be used as a backup 
D)  Gives the DACT priority access to the phone line 
A)  Achieved through an RJ-31X connector 
B)  The house phone will continue to operate 
C)  Cellular phone may be used as a backup 
D)  Gives the DACT priority access to the phone line

Question 10

How can the number of devices on an analog addressable circuit and the overall distance requirements from the control panel to the farthest device in the loop be determined ?

Accepted Answer

A)  It is determined by the manufacturer 
B)  By using end of line devices 
C)  By calculating the high-speed data requirements 
D)  By calculating the total current in the loop 
A)  It is determined by the manufacturer 
B)  By using end of line devices 
C)  By calculating the high-speed data requirements 
D)  By calculating the total current in the loop

Question 11

Heat detectors are a suitable substitute for smoke detectors.

Accepted Answer

A) True 
 B)False

Question 12

The power source for a power-limited fire alarm system cannot output voltages greater than ________

Accepted Answer

A)  150V 
B)  300V 
C)  600V 
D)  1000V 
A)  150V 
B)  300V 
C)  600V 
D)  1000V

Question 13

Maximum allowable ceiling temperatures are typically _________ less than the temperature rating of the heat detector.

Accepted Answer

A)  1  ◦  F 
B)  5  ◦  F 
C)  10  ◦  F 
D)  20  ◦  F 
A)  1  ◦  F 
B)  5  ◦  F 
C)  10  ◦  F 
D)  20  ◦  F

Question 14

Audible alarm indicators, for commercial spaces, must output a minimum level of _____dB at 10ft. and be _______dB greater than the ambient noise level.

Accepted Answer

A)  60dB, 6dB 
B)  60dB, 15dB 
C)  75dB, 15dB 
D)  85dB, 15dB 
A)  60dB, 6dB 
B)  60dB, 15dB 
C)  75dB, 15dB 
D)  85dB, 15dB

Question 15

Fire alarm systems, classified for residential use, cannot be used in commercial space s.

Accepted Answer

A) True 
 B)False

Question 16

Class A circuits are four wire circuits that do not use end of line devices.

Accepted Answer

A) True 
 B)False

Question 17

The fire alarm annunciator panel, monitors all input sensors and initiating devices.

Accepted Answer

A) True 
 B)False

Question 18

What type of detector technology is nonrestorable?

Accepted Answer

A)  Thermopiles 
B)  Temperature sensitive resistors 
C)  Fusible links 
D)  Thermistors 
A)  Thermopiles 
B)  Temperature sensitive resistors 
C)  Fusible links 
D)  Thermistors

Question 19

What type of heat detector responds to shifting temperatures that vary excessively beyond a predetermined value?

Accepted Answer

A)  Rate-of-rise 
B)  Rate compensation 
C)  Fixed temperature 
D)  Spot detector 
A)  Rate-of-rise 
B)  Rate compensation 
C)  Fixed temperature 
D)  Spot detector

Question 20

Carbon monoxide detectors are required in all _________.

Accepted Answer

A)  Installations 
B)  Industrial installations 
C)  Commercial Installations 
D)  Residential Installation 
A)  Installations 
B)  Industrial installations 
C)  Commercial Installations 
D)  Residential Installation

Survivability requires a minimum rating of _________ to ensure the functional use of the system during a fire.

To ensure survivability, the type of cable required is _________.

Fire alarm circuits must be clearly labeled at every junction and terminal connection.

Single conductor sizes for a power-limited fire alarm circuit cannot be smaller than ____________.

Emergency telephone must be part of the main telephone system.

The power source for a nonpower-limited fire alarm system cannot output voltages greater than ________

End of line devices are required by addressable fire alarm systems.

Heat detectors are considered to be life-safety devices.

What statement about line seizure is not true?

How can the number of devices on an analog addressable circuit and the overall distance requirements from the control panel to the farthest device in the loop be determined ?

Heat detectors are a suitable substitute for smoke detectors.

The power source for a power-limited fire alarm system cannot output voltages greater than ________

Maximum allowable ceiling temperatures are typically _________ less than the temperature rating of the heat detector.

Audible alarm indicators, for commercial spaces, must output a minimum level of _dB at 10ft. and be ___dB greater than the ambient noise level.

Fire alarm systems, classified for residential use, cannot be used in commercial space s.

Class A circuits are four wire circuits that do not use end of line devices.

The fire alarm annunciator panel, monitors all input sensors and initiating devices.

What type of detector technology is nonrestorable?

What type of heat detector responds to shifting temperatures that vary excessively beyond a predetermined value?

Carbon monoxide detectors are required in all _________.

Introduction to the National Electrical Code

Electrical Conductors and Cable

Grounding and Bonding and the 2011 National Electrical Code, Articles 250, 800, 810, and 820

Audio Physics

Audio Signal-Processing, Amplification, and Reproduction Equipment and National Electrical Code Article 640

Networking and Information Technology Equipment

Power Supplies, Batteries, and Emergency Systems

Article 725 of the National Electrical Code; Classification of Circuits

Fiber-Optic Cable and National Electrical Code Article 770

Telecommunications, and National Electrical Code Article 800

Security and Card Access System Basics

Wireless Communications and National Electrical Code Article 810

Close Circuit Television Camera Systems and National Electrical Code Article 820

Filters

Exam 9: Fire Alarm Systems and National Electrical Code Article 760

Survivability requires a minimum rating of _________ to ensure the functional use of the system during a fire.

To ensure survivability, the type of cable required is _________.

Fire alarm circuits must be clearly labeled at every junction and terminal connection.

Single conductor sizes for a power-limited fire alarm circuit cannot be smaller than ____________.

Emergency telephone must be part of the main telephone system.

The power source for a nonpower-limited fire alarm system cannot output voltages greater than ________

End of line devices are required by addressable fire alarm systems.

Heat detectors are considered to be life-safety devices.

What statement about line seizure is not true?

How can the number of devices on an analog addressable circuit and the overall distance requirements from the control panel to the farthest device in the loop be determined ?

Heat detectors are a suitable substitute for smoke detectors.

The power source for a power-limited fire alarm system cannot output voltages greater than ________

Maximum allowable ceiling temperatures are typically _________ less than the temperature rating of the heat detector.

Audible alarm indicators, for commercial spaces, must output a minimum level of _____dB at 10ft. and be _______dB greater than the ambient noise level.

Fire alarm systems, classified for residential use, cannot be used in commercial space s.

Class A circuits are four wire circuits that do not use end of line devices.

The fire alarm annunciator panel, monitors all input sensors and initiating devices.

What type of detector technology is nonrestorable?

What type of heat detector responds to shifting temperatures that vary excessively beyond a predetermined value?

Carbon monoxide detectors are required in all _________.

Introduction to the National Electrical Code

Electrical Conductors and Cable

Grounding and Bonding and the 2011 National Electrical Code, Articles 250, 800, 810, and 820

Audio Physics

Audio Signal-Processing, Amplification, and Reproduction Equipment and National Electrical Code Article 640

Networking and Information Technology Equipment

Power Supplies, Batteries, and Emergency Systems

Article 725 of the National Electrical Code; Classification of Circuits

Fiber-Optic Cable and National Electrical Code Article 770

Telecommunications, and National Electrical Code Article 800

Security and Card Access System Basics

Wireless Communications and National Electrical Code Article 810

Close Circuit Television Camera Systems and National Electrical Code Article 820

Filters

Audible alarm indicators, for commercial spaces, must output a minimum level of _dB at 10ft. and be ___dB greater than the ambient noise level.