Question 1

In the National Electrical Code , the word shall means "mandatory".

Accepted Answer

A) True 
 B)False  True

Question 2

According to the National Electrical Code, the word listed is defined as ________.

Accepted Answer

A)  Equipment and materials that have been attached a label 
B)  Devices that have been identified for future use with a tag 
C)  Equipment and materials that have been included in a list published by an approved agency 
D)  Equipment that has clearly been identified by the manufacture as suitable for use 
A)  Equipment and materials that have been attached a label 
B)  Devices that have been identified for future use with a tag 
C)  Equipment and materials that have been included in a list published by an approved agency 
D)  Equipment that has clearly been identified by the manufacture as suitable for use C

Question 3

An example of a national listing and labeling laboratory is _________.

Accepted Answer

A)  NTA 
B)  UL 
C)  CSA 
D)  All the above 
A)  NTA 
B)  UL 
C)  CSA 
D)  All the above D

Question 4

Match between columns
                        Premises: ________ Article 700

Accepted Answer

The Answer of Optical Fiber Cables and Raceways and Fire is...

Question 5

Match between columns
                        Premises: ________ Chapter 9

Accepted Answer

The Answer of Emergency Systems and Audio Signal Processing, Amplification is...

Question 6

The National Electrical Code is also referred to as _________.

Accepted Answer

A)  NFPA 70 
B)  ANSI 6270-B 
C)  NEC 70 
D)  NEC 1997 
A)  NFPA 70 
B)  ANSI 6270-B 
C)  NEC 70 
D)  NEC 1997

Question 7

The purpose of the  National Electrical Code is the practical ________ of persons and property from hazards arising from the use of electricity.

Accepted Answer

A)  Principles 
B)  Safeguarding 
C)  Fundamentals 
D)  Protection 
A)  Principles 
B)  Safeguarding 
C)  Fundamentals 
D)  Protection

Question 8

Formal interpretations of the National Electrical Code are permitted to be made by the authority having jurisdiction.

Accepted Answer

A) True 
 B)False

Question 9

The National Electrical Code is intended as a design specification and instruction manual for untrained persons.

Accepted Answer

A) True 
 B)False

Question 10

The organization, office or individual responsible for approving equipment, materials, and installation procedures, is the ________.

Accepted Answer

A)  Chief Electrical Inspector 
B)  Electrical Inspector 
C)  Authority Having Jurisdiction 
D)  Chief Fire Inspector 
A)  Chief Electrical Inspector 
B)  Electrical Inspector 
C)  Authority Having Jurisdiction 
D)  Chief Fire Inspector

Question 11

The National Electrical Code specifically states that is does not cover installation in ships, mines, railways and communications equipment under the exclusive control of the utilities.

Accepted Answer

A) True 
 B)False

Question 12

In the National Electrical Code , measurements are given in metric units first.

Accepted Answer

A) True 
 B)False

Question 13

Vertical lines in the margins of the National Electrical Code denote ________.

Accepted Answer

A)  Wiring in hazardous locations 
B)  Wiring in special occupancies 
C)  Notable definitions 
D)  Changes in this edition of the NEC 
A)  Wiring in hazardous locations 
B)  Wiring in special occupancies 
C)  Notable definitions 
D)  Changes in this edition of the NEC

Question 14

There are a total of ten chapters in the National Electrical Code .

Accepted Answer

A) True 
 B)False

Question 15

The National Electrical Code is revised and updated every five years.

Accepted Answer

A) True 
 B)False

Question 16

Match between columns
                        Premises: ________ Article 640

Accepted Answer

The Answer of Tables and Definitions and Optical Fiber Cables is...

Question 17

Match between columns
                        Premises: ________ Article 770

Accepted Answer

The Answer of Radio and Television Equipment and Network Powered is...

Question 18

Code rules that provide an alternate method to a specific requirements are called exceptions.

Accepted Answer

A) True 
 B)False

Question 19

When an article in the National Electrical Code is significantly large it is divided into __________.

Accepted Answer

A)  parts 
B)  chapters 
C)  subsections 
D)  lists 
A)  parts 
B)  chapters 
C)  subsections 
D)  lists

Question 20

All definitions contained in the National Electrical Code are found in article 100.

Accepted Answer

A) True 
 B)False

In the National Electrical Code , the word shall means "mandatory".

According to the National Electrical Code, the word listed is defined as ________.

An example of a national listing and labeling laboratory is _________.

The National Electrical Code is also referred to as _________.

The purpose of the National Electrical Code is the practical ________ of persons and property from hazards arising from the use of electricity.

Formal interpretations of the National Electrical Code are permitted to be made by the authority having jurisdiction.

The National Electrical Code is intended as a design specification and instruction manual for untrained persons.

The organization, office or individual responsible for approving equipment, materials, and installation procedures, is the ________.

The National Electrical Code specifically states that is does not cover installation in ships, mines, railways and communications equipment under the exclusive control of the utilities.

In the National Electrical Code , measurements are given in metric units first.

Vertical lines in the margins of the National Electrical Code denote ________.

There are a total of ten chapters in the National Electrical Code .

The National Electrical Code is revised and updated every five years.

Code rules that provide an alternate method to a specific requirements are called exceptions.

When an article in the National Electrical Code is significantly large it is divided into __________.

All definitions contained in the National Electrical Code are found in article 100.

Electrical Conductors and Cable

Grounding and Bonding and the 2011 National Electrical Code, Articles 250, 800, 810, and 820

Audio Physics

Audio Signal-Processing, Amplification, and Reproduction Equipment and National Electrical Code Article 640

Networking and Information Technology Equipment

Power Supplies, Batteries, and Emergency Systems

Article 725 of the National Electrical Code; Classification of Circuits

Fire Alarm Systems and National Electrical Code Article 760

Fiber-Optic Cable and National Electrical Code Article 770

Telecommunications, and National Electrical Code Article 800

Security and Card Access System Basics

Wireless Communications and National Electrical Code Article 810

Close Circuit Television Camera Systems and National Electrical Code Article 820

Filters

Exam 1: Introduction to the National Electrical Code

In the National Electrical Code , the word shall means "mandatory".

According to the National Electrical Code, the word listed is defined as ________.

An example of a national listing and labeling laboratory is _________.

The National Electrical Code is also referred to as _________.

The purpose of the National Electrical Code is the practical ________ of persons and property from hazards arising from the use of electricity.

Formal interpretations of the National Electrical Code are permitted to be made by the authority having jurisdiction.

The National Electrical Code is intended as a design specification and instruction manual for untrained persons.

The organization, office or individual responsible for approving equipment, materials, and installation procedures, is the ________.

The National Electrical Code specifically states that is does not cover installation in ships, mines, railways and communications equipment under the exclusive control of the utilities.

In the National Electrical Code , measurements are given in metric units first.

Vertical lines in the margins of the National Electrical Code denote ________.

There are a total of ten chapters in the National Electrical Code .

The National Electrical Code is revised and updated every five years.

Code rules that provide an alternate method to a specific requirements are called exceptions.

When an article in the National Electrical Code is significantly large it is divided into __________.

All definitions contained in the National Electrical Code are found in article 100.

Electrical Conductors and Cable

Grounding and Bonding and the 2011 National Electrical Code, Articles 250, 800, 810, and 820

Audio Physics

Audio Signal-Processing, Amplification, and Reproduction Equipment and National Electrical Code Article 640

Networking and Information Technology Equipment

Power Supplies, Batteries, and Emergency Systems

Article 725 of the National Electrical Code; Classification of Circuits

Fire Alarm Systems and National Electrical Code Article 760

Fiber-Optic Cable and National Electrical Code Article 770

Telecommunications, and National Electrical Code Article 800

Security and Card Access System Basics

Wireless Communications and National Electrical Code Article 810

Close Circuit Television Camera Systems and National Electrical Code Article 820

Filters