Question 1

Why should you include the position/orientation of the home in your inspection report?

Accepted Answer

A)  The condition of the home is impacted.
B)  The ability to establish a garden is impacted.
C)  The effectiveness of solar panels is impacted.
D)  The capacity for energy efficiency is impacted. A

Question 2

What aspects of a property MOST impact the structural integrity of the home?

Accepted Answer

A)  Drainage
B)  Grading
C)  All of the above
D)  None of the above C

Question 3

Which of the following are common materials used to build chimneys?

Accepted Answer

A)  Concrete block
B)  Stone
C)  Brick
D)  All of the above D

Question 4

While performing an inspection, you notice tiny white bugs in the corner of a room. How do you report your findings?

Accepted Answer

A)  Make note of observation and recommend client hire a pest control expert.
B)  Make note of observation and recommend client find another property.
C)  Do not make note of observation since you are not a pest control expert.
D)  Do not make note of observation because it was just a few termites.

Question 5

Which of the following descriptions is a good indication there is a problem with a flat roof?

Accepted Answer

A)  Proper drainage system in place
B)  Recent replacement of split sections
C)  Evidence of ponding water
D)  Proof eroded areas have been repaired

Question 6

Which of the following observations is acceptable to include in a home inspection report?

Accepted Answer

A)  Home is structurally sound
B)  Roof will last for at least another five years
C)  Electrical system is perfectly safe
D)  None of the above

Question 7

Which one of the following is an acceptable format for a home inspection report?

Accepted Answer

A)  Narrative report only
B)  Checklist report only
C)  Narrative and checklist report
D)  Any of the above

Question 8

You test for carbon monoxide accumulation while conducting a home inspection. What should your report reflect?

Accepted Answer

A)  Equipment you used to perform the test
B)  Findings of the test in each room tested
C)  Recommendations if deficiencies are found
D)  All of the above

Question 9

Your pre-inspection contract states you do not inspect the operability of washers and dryers. What information do you need to include in your inspection report?

Accepted Answer

A)  Nothing more needs to be said about the washer and dryer.
B)  Operation of washer and dryer is not included with standard inspection
C)  Safety concerns identified during the inspection
D)  Both B and C

Question 10

What are two elements that must be included in an inspection report when describing a basement?

Accepted Answer

A)  Size and type
B)  Size and whether or not it is finished
C)  Type and whether or not it is finished
D)  None of the above

Question 11

In addition to conditions and deficiencies, which of the following can you include in an inspection report?

Accepted Answer

A)  Routine maintenance ideas
B)  Seasonal maintenance recommendations
C)  All of the above
D)  None of the above

Question 12

What type of information should be included in inspection reports?

Accepted Answer

A)  Materials used during construction
B)  Conditions/deficiencies identified
C)  Maintenance recommended
D)  Ideas for troubleshooting problems
E)  All of the above

Question 13

It is a good idea to include which of the following statements in your inspection report?

Accepted Answer

A)  Regardless of inspection findings, client should plan to replace appliances.
B)  Regardless of inspection findings, client should plan for unexpected repairs.
C)  Based on inspection findings, client can expect to spend $1,000s in repairs annually.
D)  Based on inspection findings, client will not need to make repairs for several years.

Question 14

While inspecting the plumbing, you notice a bulge in a water service pipe. What is most likely to be the cause of this bulge?

Accepted Answer

A)  Aluminum
B)  Lead
C)  Copper
D)  None of the above

Question 15

Your client requests a "technically exhaustive" inspection. How do you respond?

Accepted Answer

A)  You prepare to perform an in-depth inspection of all systems and concealed components.
B)  You contact expert technicians to complete the in-depth inspections of systems.
C)  You explain you are only able to perform a standard inspection.
D)  You ask what a "technically exhaustive" inspection is before you complete one.

Question 16

Which of the following are you required to inspect during your inspection of the home's exterior?

Accepted Answer

A)  Sheds
B)  Docks
C)  Fences
D)  Carport

Question 17

You are preparing to inspect the heating system when you notice the pilots are not lit. What is the appropriate response to this situation?

Accepted Answer

A)  Light the pilot and inspect the heating system for deficiencies.
B)  Suggest client have the heating system tested for asbestos.
C)  Indicate in your report that an inspection of the heating system was not possible.
D)  Conduct a visual inspection of the heating system.

Question 18

When inspecting the exterior of the home, you notice there are no rain gutters. Your report should reflect which of the following?

Accepted Answer

A)  There are no rain gutters.
B)  There are no rain gutters, and the home's foundation is compromised.
C)  There are no rain gutters, and the owner must install them.
D)  There are no rain gutters, and this is a code violation.

Question 19

You notice bulging plaster on one of the living room walls. You determine this is a

Accepted Answer

A)  Possible safety concern
B)  Problem with the installation
C)  Cosmetic problem with the wall
D)  Dilemma that requires an expert's opinion

Question 20

When describing the siding of a home, which of the following is an appropriate response?

Accepted Answer

A)  It looks to be about 25 years old and should be replaced.
B)  It looks to be about 25 years old and needs to be repainted.
C)  It is made of aluminum and has multiple missing nails.
D)  It is made of aluminum and has been painted an ugly green.

Exam 1: Analysis Reporting