Question 1

In the United States, there are ______ classes of fire.

Accepted Answer

A)  Three 
B)  Four 
C)  Five 
D)  Six

Question 2

A ______ background on a safety sign is used to identify a definite hazard; ______ indicates caution for a potential hazard.

Accepted Answer

A)  Red; green 
B)  Blue; red 
C)  Yellow; blue 
D)  Red; yellow

Question 3

Tech A says that one approved way to clean dust off brakes is with compressed air. Tech B says that some auto parts may contain asbestos. Who is correct?

Accepted Answer

A)  Tech A 
B)  Tech B 
C)  Both A and B 
D)  Neither A nor B

Question 4

Protective chemical gloves should extend to _______ to reduce the risk of chemicals splashing onto your skin.

Accepted Answer

A)  Your upper arm 
B)  Two inches above your wrist 
C)  Your elbow 
D)  The middle of your forearm

Question 5

There are three signal words: ________, ________, and ________.

Accepted Answer

A)  Stop; warning; danger 
B)  Warning; general; danger 
C)  Danger; warning; caution 
D)  Caution; stop; danger

Question 6

Which of the following should be inspected during a shop safety inspection?

Accepted Answer

A)  Faulty or unsafe equipment or tools 
B)  Clutter, spills, unsafe shop practices 
C)  Items blocking emergency exits or walkways 
D)  All of the above

Question 7

When bending down to lift something, you should:

Accepted Answer

A)  bend over with straight legs. 
B)  put your feet together. 
C)  bend your knees. 
D)  bend your back.

Question 8

When using an AED; if no shock is advised, resume CPR immediately ( _____ sets of 30 compressions and 2 breaths, or compressions by themselves).

Accepted Answer

A)  Three 
B)  Five 
C)  Two 
D)  Four

Question 9

All automotive shop activities will need to comply with EPA laws and regulations by ________.

Accepted Answer

A)  Ensuring that waste products are disposed of in an environmentally responsible way 
B)  Storing chemicals and fluids correctly 
C)  Ensuring that work practices do not contribute to damaging the environment 
D)  All of the above

Question 10

Which of the following is the correct pictogram for a Class A fire extinguisher?

Accepted Answer

A)  Green triangle 
B)  Red square 
C)  Blue circle 
D)  Yellow pentagram

Question 11

Tech A says that tinted safety glasses can be worn when working outside. Tech B says that welding can cause a sunburn. Who is correct?

Accepted Answer

A)  Tech A 
B)  Tech B 
C)  Both A and B 
D)  Neither A nor B

Question 12

Technician A says shop safety inspections can be a valuable way of identifying unsafe conditions. Technician B says always block unused exit doors for security purposes. Who is correct?

Accepted Answer

A)  Technician A 
B)  Technician B 
C)  Both A and B 
D)  Neither A nor B

Question 13

Technician A says that in most cases even if a job requires a full face shield, it is typically an accepted practice to wear just safety glasses. Technician B says you need to make sure the PPE you are using is worn correctly. . Who is correct?

Accepted Answer

A)  Technican A 
B)  Technician B 
C)  Both A and B 
D)  Neither A nor B

Question 14

Technician A says your skin prevents chemicals from entering your body. Technician B says to wear ear protection if the sound level is 85 decibels or above. Who is correct?

Accepted Answer

A)  Technician A 
B)  Technician B 
C)  Both A and B 
D)  Neither A nor B

Question 15

Technician A says you need to size up a fire before you make the decision to fight it with a fire extinguisher, by identifying what sort of material is burning. Technician B says do not fight a fire unless you can do so safely. Who is correct?

Accepted Answer

A)  Technician A 
B)  Technician B 
C)  Both A and B 
D)  Neither A nor B

Question 16

Regulations on how to dispose of waste fluids are set by which level of government?

Accepted Answer

A)  Local 
B)  State 
C)  Federal 
D)  All of the above

Question 17

Tech A says that exposure to solvents may have long-term effects. Tech B says that accidents are almost always avoidable. Who is correct?

Accepted Answer

A)  Tech A 
B)  Tech B 
C)  Both A and B 
D)  Neither A nor B

Question 18

Which of the following may result from coming into frequent or prolonged contact with used engine oil?

Accepted Answer

A)  Respiratory problems 
B)  Minor eye irritation 
C)  Dermatitis and other skin disorders 
D)  Block in the lungs

Question 19

Tech A says that rings, watches, and other jewelry should be removed prior to working. Tech B says that you should always wear cuffed pants when working in a shop. Who is correct?

Accepted Answer

A)  Tech A 
B)  Tech B 
C)  Both A and B 
D)  Neither A nor B

Question 20

________ are designed to smother a small fire and are very useful in putting out a fire on a person.

Accepted Answer

A)  Fire extinguishers 
B)  Fire blankets 
C)  Safety equipment 
D)  Fire aprons

Exam 2: Safety

In the United States, there are ______ classes of fire.

A background on a safety sign is used to identify a definite hazard; indicates caution for a potential hazard.

Tech A says that one approved way to clean dust off brakes is with compressed air. Tech B says that some auto parts may contain asbestos. Who is correct?

Protective chemical gloves should extend to _______ to reduce the risk of chemicals splashing onto your skin.

There are three signal words: , , and .

Which of the following should be inspected during a shop safety inspection?

When bending down to lift something, you should:

When using an AED; if no shock is advised, resume CPR immediately ( _____ sets of 30 compressions and 2 breaths, or compressions by themselves) .

All automotive shop activities will need to comply with EPA laws and regulations by ________.

Which of the following is the correct pictogram for a Class A fire extinguisher?

Tech A says that tinted safety glasses can be worn when working outside. Tech B says that welding can cause a sunburn. Who is correct?

Technician A says shop safety inspections can be a valuable way of identifying unsafe conditions. Technician B says always block unused exit doors for security purposes. Who is correct?

Technician A says that in most cases even if a job requires a full face shield, it is typically an accepted practice to wear just safety glasses. Technician B says you need to make sure the PPE you are using is worn correctly. . Who is correct?

Technician A says your skin prevents chemicals from entering your body. Technician B says to wear ear protection if the sound level is 85 decibels or above. Who is correct?

Technician A says you need to size up a fire before you make the decision to fight it with a fire extinguisher, by identifying what sort of material is burning. Technician B says do not fight a fire unless you can do so safely. Who is correct?

Regulations on how to dispose of waste fluids are set by which level of government?

Tech A says that exposure to solvents may have long-term effects. Tech B says that accidents are almost always avoidable. Who is correct?

Which of the following may result from coming into frequent or prolonged contact with used engine oil?

Tech A says that rings, watches, and other jewelry should be removed prior to working. Tech B says that you should always wear cuffed pants when working in a shop. Who is correct?

________ are designed to smother a small fire and are very useful in putting out a fire on a person.