Question 1

On the interface serial 1/0/1 of RTA, the command "ip address unnumbered interface loopback 0" has been configured.  Which following statements are correct? (Choose two).

Accepted Answer

A)  The IP address of interface serial 1/0/1 is 10.1.1.1/24 
B)  The IP address of interface serial 1/0/1 is 10.1.1.1/32 
C)  The route entry 10.1.1.0/24 exists in RTA's routing-table 
D)  The route entry 10.1.1.0/24 does not exist in RTA's routing-table

Question 2

Which of the following formats represent an accurate condensing of the IPv6 address 2031:0000:720C:0000:0000:09E0:839A:130B? (Choose two).

Accepted Answer

A)  2031:0:720C:0:0:9E0:839A:130B 
B)  2031:0:720C:0:0:9E:839A:130B 
C)  2031::720C::9E0:839A:130B 
D)  2031:0:720C::9E0:839A:130B

Question 3

The main control board GCCX is core processing unit of the system, responsible for video, audio, information exchange process, and execution control command operations management center.

Accepted Answer

A) True 
 B)False

Question 4

How many probe packets are sent for each TTL value by default when "tracert" is used to detect the path along which packet is sent from source to destination?

Accepted Answer

A)  3 
B)  4 
C)  6 
D)  8

Question 5

MCU8650, MCU8660 and MCU8650C can be expanded by adding veneer.

Accepted Answer

A) True 
 B)False

Question 6

Which of the following statements regarding Designated Routers in OSPF are correct? (Choose three)

Accepted Answer

A)  DR is elected by all the routers in the same network segment. 
B)  If the priorities of two routers are different, the router with the lower priority will be elected as DR. 
C)  If the priorities of two routers are equal, the router with the higher Router ID will be elected as DR. 
D)  DR and BDR must be adjacent.

Question 7

Which are the audio input interfaces of the HD terminal? (Please choose 2 answers)

Accepted Answer

A)  COM 
B)  MIC 
C)  AUDIO IN 
D)  SD IN

Question 8

Refer to the capture output. The administrator has captured three packets in the network. Which statement regarding the captured packets is incorrect?

Accepted Answer

A)  This packets represent a TCP three-way handshake process. 
B)  10.0.12.1 is the telnet server, while 10.0.12.2 is the telnet client. 
C)  The three packets contain no application data. 
D)  10.0.12.1 uses port 50190 to buid the telnet connection.

Question 9

Which of the following statements are true according to the following command output?

Accepted Answer

A)  The OSPFv3 area ID is 0. 
B)  The OSPFv3 process ID is 1. 
C)  The DR priority of the local router is 1. 
D)  The router ID of the neighbor is 10.0.1.1.

Question 10

What is the number range of a basic ACL?

Accepted Answer

A)  2000-2999 
B)  3000-3999 
C)  4000-4999 
D)  6000-6031

Question 11

Which of the following MAC addresses are not aged out? (Choose two.)

Accepted Answer

A)  Static MAC address 
B)  Dynamic MAC address 
C)  Blackhole MAC address 
D)  Port MAC address

Question 12

Refer to the graphic. An administrator has configured OSPF on the two routers, following which he then implements the command silent-interface s0/0/1 on RTA. What effect will this command have on the network? (Multiple Choice)

Accepted Answer

A)  The link information advertised by RTB will be maintained in the Link State Database of RTA. 
B)  The OSPF neighbor relationship will fail between two routers. 
C)  The configuration will not affect the OSPF neighbor relationship between the two routers. 
D)  The link information advertised by RTB will no longer be maintained in the Link State Database of RTA.

Question 13

Refer to the graphic. Which statements correctly explains the forwarding behavior between RTA and RTE? (Choose all that apply)

Accepted Answer

A)  When the network uses OSPF, data will be forwarded along the path via S1/0/0 
B)  When the network uses RIPv2, data will be forwarded along the path via S1/0/0 
C)  When the network uses OSPF, data will be forwarded along the path from via E0/0/1 
D)  When the network uses RIPv2, data will be forwarded along the path via S2/0/0

Question 14

Refer to the display output. What can be determined based on the output of the display command?

Accepted Answer

A)  Interface Gigabit Ethernet 0/0/0 is connected to a wrong cable 
B)  Interface Gigabit Ethernet 0/0/0 is not associated with an IP address 
C)  Interface Gigabit Ethernet 0/0/0 is not associated with a dynamically defined route. 
D)  Interface Gigabit Ethernet 0/0/0 has been manually shut down by an administrator.

Question 15

If it is found that terminal output images overturn, it can be revised through the "FLIP" DIP of camera back plate.

Accepted Answer

A) True 
 B)False

Question 16

Which of the following ACLs can match the transport layer port number?

Accepted Answer

A)  Basic ACL 
B)  Intermediate ACL 
C)  Layer 2 ACL 
D)  Advanced ACL

Question 17

On an FR network, when the fr inarp command is executed, the interface where static address mapping entries have been configured sends an Inverse ARP Request packet to the remote device to replace the static address mapping entries.

Accepted Answer

A) True 
 B)False

Question 18

Refer to the graphic. OSPF is used on four routers that are in the same area and on the same network segment. In this scenario, OSPF selects one DR and multiple BDRs to ensure backup.

Accepted Answer

A) True 
 B)False

Question 19

Which of the following protocols can be used on a Layer 2 network with redundant links to prevent loops?

Accepted Answer

A)  UDP 
B)  VRRP 
C)  STP 
D)  ARP

Question 20

Which command can be used to check the PPPoE client session status?

Accepted Answer

A)  display ip interface brief 
B)  display current-configuration 
C)  display pppoe-client session packet 
D)  display pppoe-client session summary

Exam 2: HHCIA Routing&Switching

On the interface serial 1/0/1 of RTA, the command "ip address unnumbered interface loopback 0" has been configured. Which following statements are correct? (Choose two) .

Which of the following formats represent an accurate condensing of the IPv6 address 2031:0000:720C:0000:0000:09E0:839A:130B? (Choose two) .

The main control board GCCX is core processing unit of the system, responsible for video, audio, information exchange process, and execution control command operations management center.

How many probe packets are sent for each TTL value by default when "tracert" is used to detect the path along which packet is sent from source to destination?

MCU8650, MCU8660 and MCU8650C can be expanded by adding veneer.

Which of the following statements regarding Designated Routers in OSPF are correct? (Choose three)

Which are the audio input interfaces of the HD terminal? (Please choose 2 answers)

Refer to the capture output. The administrator has captured three packets in the network. Which statement regarding the captured packets is incorrect?

Which of the following statements are true according to the following command output?

What is the number range of a basic ACL?

Which of the following MAC addresses are not aged out? (Choose two.)

Refer to the graphic. An administrator has configured OSPF on the two routers, following which he then implements the command silent-interface s0/0/1 on RTA. What effect will this command have on the network? (Multiple Choice)

Refer to the graphic. Which statements correctly explains the forwarding behavior between RTA and RTE? (Choose all that apply)

Refer to the display output. What can be determined based on the output of the display command?

If it is found that terminal output images overturn, it can be revised through the "FLIP" DIP of camera back plate.

Which of the following ACLs can match the transport layer port number?

On an FR network, when the fr inarp command is executed, the interface where static address mapping entries have been configured sends an Inverse ARP Request packet to the remote device to replace the static address mapping entries.

Refer to the graphic. OSPF is used on four routers that are in the same area and on the same network segment. In this scenario, OSPF selects one DR and multiple BDRs to ensure backup.

Which of the following protocols can be used on a Layer 2 network with redundant links to prevent loops?

Which command can be used to check the PPPoE client session status?