Question 1

The Cisco DNA Center Sites API must be used to add a device to a site, but only the site name is available. Which API call must be used to retrieve the site identifier so that the device can be properly added to the network?

Accepted Answer

A)   /dna/intent/api/site/siteId
B)   /dna/intent/api/site
C)   /dna/intent/api/v1/site
D)   /dna/intent/api/v1/site/siteName C

Question 2

What is the maximum number of switches that can be stacked using Cisco StackWise?

Accepted Answer

A)   4
B)   5
C)   8
D)   9
E)   10F)  13 D

Question 3

Which CLI command do you use to shut down the 2.4 GHz radio of the Floor1_AP1 AP on a Cisco 3850 Switch?

Accepted Answer

A)   ap name Floor1_AP1 dot11 shutdown 24ghz
B)   ap name Floor1_AP1 dot11 5ghz shutdown
C)   ap name Floor1_AP1 dot11 24ghz shutdown
D)   ap name Floor1_AP1 shutdown dot11 24ghz C

Question 4

Which Python snippet receives a Meraki webhook request?

Accepted Answer

A)   
B)   
C)   
D)

Question 5

Which two WAN technologies support IEEE 802.1Q, site-to-site connectivity, and point-to-point connectivity between two offices? (Choose two.)

Accepted Answer

A)   Ethernet over MPLS
B)   VPLS
C)   Layer 3 MPLS
D)   DSL
E)   cable

Question 6

Which field must be completed in Cisco DNA Center when a network discovery is initiated?

Accepted Answer

A)   SNMP read community string
B)   Enable password
C)   NETCONF port
D)   Discovery type

Question 7

Refer to the exhibit. Cisco SD-WAN deployment must be troubleshooted using vManage APIs. A call to vEdge Hardware Health API returns the data in the exhibit (only a portion is shown). If this JSON is converted to a Python dictionary and assigned to the variable "d" , how the status is accessed that is indicated on line 16?

Accepted Answer

A)   d[data][0][statusList][0][status]
B)   d['data']['statusList']['status']
C)   d{'data'}[0]{'statusList'}[0]{'status'}
D)   d['data'][0]['statusList'][0]['status']

Question 8

Which two Netmiko methods are used to configure a device? (Choose two.)

Accepted Answer

A)   send_config() 
B)   send_control_from_file() 
C)   send_config_set() 
D)   send_command() 
E)   send_config_from_file()

Question 9

Refer to the exhibit. How many YANG models does the NETCONF <get> operation interact with?

Accepted Answer

A)   one
B)   two
C)   three
D)   four

Question 10

Refer to the exhibit.  An engineer utilizing ISE as the wireless AAA service noticed that the accounting process on the server at 10.10.2.3 has failed, but authentication process is still functional. Which ISE nodes receive WLC RADIUS traffic, using the CLI output and assuming the WLAN uses the servers in their indexed order?

Accepted Answer

A)   authentication to 10.10.2.4, accounting to 10.10.2.3.
B)   authentication to 10.10.2.3, accounting to 10.10.2.3.
C)   authentication to 10.10.2.4, accounting to 10.10.2.4.
D)   authentication to 10.10.2.3, accounting to 10.10.2.4.

Question 11

Refer to the exhibit. A Python script is used to configure a Cisco IOS XE device. The script must be updated to print the IP addresses of all the loopback interfaces. Which statement should be added before the loop?

Accepted Answer

A)   interfaces = response.json() ["ietf-interfaces:interfaces"]
B)   interface = response.json() ["ietf-interfaces:interfaces"]
C)   interface = response.json() ["ietf-interfaces:interfaces"]["interface"]
D)   interfaces = response.json() ["ietf-interfaces:interfaces"]["interface"]

Question 12

Which two network assurance features are provided by the Cisco DNA Center API? (Choose two.)

Accepted Answer

A)   site health
B)   license compliance health
C)   client health
D)   Cisco APIC appliance health
E)   Cisco DNA Center appliance health

Question 13

When accessing the /device-detail endpoint in Cisco DNA Center, what is an acceptable SearchBy parameter value?

Accepted Answer

A)   platform type
B)   IP address
C)   software version
D)   MAC address

Question 14

A company requires redundancy for its multihomed BGP external connections. What two features can be configured on the WAN routers to automate failover for both outbound and inbound traffic? (Choose two.)

Accepted Answer

A)   AS path prepending
B)   local preference
C)   floating static route
D)   HSRP
E)   MEDF)  weight

Question 15

Which two security measures must an engineer follow when implementing Layer 2 and Layer 3 network design? (Choose two.)

Accepted Answer

A)   Utilize DHCP snooping on a per VLAN basis and apply ip dhcp snooping untrusted on all ports. Utilize DHCP snooping on a per VLAN basis and apply ip dhcp snooping untrusted on all ports.
B)   Utilize the native VLAN only on trunk ports to reduce the risk of a Double-Tagged 802.1q VLAN hopping attack.
C)   Utilize an access list to prevent the use of ARP to modify entries to the table.
D)   Utilize private VLANs and ensure that all ports are part of the isolated port group.
E)   Utilize the ARP inspection feature to help prevent the misuse of gARP.

Question 16

Which REST endpoint is used to create a Cisco Meraki network?

Accepted Answer

A)   POST /organizations/{organizationId}/networks
B)   PATCH /networks{networkId}
C)   PUT /organizations/{organizationId}/networks
D)   POST /networks{networkId}

Question 17

Which two API calls are used to trigger a device configuration sync in Cisco DNA Center? (Choose two.)

Accepted Answer

A)   PUT /dna/intent/api/v1/network-device
B)   PUT /dna/intent/api/v1/network-device/sync-all
C)   PUT /dna/intent/api/v1/network-device/{networkDeviceId}/sync
D)   PUT /dna/intent/api/v1/network-device/sync
E)   POST /dna/intent/api/v1/network-device/{networkDeviceId}/sync

Question 18

Refer to the exhibit. The task is to create a Python script to display an alert message when a Meraki MX Security Appliance goes down. The exhibit shows sample data that is received. Which Python snippet displays the device name and the time at which the switch went down?

Accepted Answer

A)   
B)   
C)   
D)

Question 19

Which two features are characteristics of software-defined networks when compared to traditional infrastructure? (Choose two.)

Accepted Answer

A)   configured box-by-box
B)   changed manually
C)   use overlay networks
D)   designed to change
E)   require software development experience to manage

Question 20

Refer to the exhibit.  An engineering team is analyzing the WAN connection for a site that has a 50 Mbps Ethernet circuit. Which technology should be used to keep the router from overrunning the carrier's 50 Mbps rate?

Accepted Answer

A)   Access Control List
B)   Shaping
C)   Policing
D)   Rate-Limit

Exam 13: Automating Cisco Enterprise Solutions (ENAUTO)

The Cisco DNA Center Sites API must be used to add a device to a site, but only the site name is available. Which API call must be used to retrieve the site identifier so that the device can be properly added to the network?

What is the maximum number of switches that can be stacked using Cisco StackWise?

Which CLI command do you use to shut down the 2.4 GHz radio of the Floor1_AP1 AP on a Cisco 3850 Switch?

Which Python snippet receives a Meraki webhook request?

Which two WAN technologies support IEEE 802.1Q, site-to-site connectivity, and point-to-point connectivity between two offices? (Choose two.)

Which field must be completed in Cisco DNA Center when a network discovery is initiated?

Which two Netmiko methods are used to configure a device? (Choose two.)

Refer to the exhibit. How many YANG models does the NETCONF <get> operation interact with?

Refer to the exhibit. A Python script is used to configure a Cisco IOS XE device. The script must be updated to print the IP addresses of all the loopback interfaces. Which statement should be added before the loop?

Which two network assurance features are provided by the Cisco DNA Center API? (Choose two.)

When accessing the /device-detail endpoint in Cisco DNA Center, what is an acceptable SearchBy parameter value?

A company requires redundancy for its multihomed BGP external connections. What two features can be configured on the WAN routers to automate failover for both outbound and inbound traffic? (Choose two.)

Which two security measures must an engineer follow when implementing Layer 2 and Layer 3 network design? (Choose two.)

Which REST endpoint is used to create a Cisco Meraki network?

Which two API calls are used to trigger a device configuration sync in Cisco DNA Center? (Choose two.)

Refer to the exhibit. The task is to create a Python script to display an alert message when a Meraki MX Security Appliance goes down. The exhibit shows sample data that is received. Which Python snippet displays the device name and the time at which the switch went down?

Which two features are characteristics of software-defined networks when compared to traditional infrastructure? (Choose two.)

Refer to the exhibit. An engineering team is analyzing the WAN connection for a site that has a 50 Mbps Ethernet circuit. Which technology should be used to keep the router from overrunning the carrier's 50 Mbps rate?