Question 1

Scenario: Client connections to certain vServers are abnormally high. A Citrix Administrator needs to be alerted whenever the connections pass a certain threshold. How can the administrator use Citrix Application Delivery Management (ADM) to accomplish this?

Accepted Answer

A)  Configure network reporting on the Citrix ADM by setting the threshold and email address. 
B)  Configure SMTP reporting on the Citrix ADM by adding the threshold and email address. 
C)  Configure TCP Insight on the Citrix ADM. 
D)  Configure specific alerts for vServers using Citrix ADM.

Question 2

Scenario: A Citrix Administrator manages an environment that has a Citrix ADC high availability (HA) pair running on two MPX appliances. The administrator notices that the state of the secondary Citrix ADC is 'Unknown'. What is causing the secondary state to be 'Unknown'?

Accepted Answer

A)  The synchronization on the secondary appliance is disabled. 
B)  TCP port 22 is disabled between the primary and secondary ADCs. 
C)  The administrator made both Citrix ADCs primary. 
D)  The remote procedure call (RP
C)  nodes are incorrectly configured.

Question 3

Scenario: A Citrix Administrator made changes to a Citrix ADC, deleting parts of the configuration and saving some new ones. The changes caused an outage that needs to be resolved as quickly as possible. There is no Citrix ADC backup. What does the administrator need to do to recover the configuration quickly?

Accepted Answer

A)  Restart the Citrix ADC. 
B)  Restore from the revision history. 
C)  Run saved versus running configuration. 
D)  Run highly availability (H
A)  file synchronization.

Question 4

Scenario: A Citrix Administrator configured SNMP to send traps to an external SNMP system. When reviewing the messages, the administrator notices several entity UP and entity DOWN messages. To what are these messages related?

Accepted Answer

A)  Load-balancing vServers 
B)  Network interface 
C)  High availability nodes 
D)  SSL profile

Question 5

Scenario: A Citrix Administrator configured an authentication, authorization, and auditing (AAA) policy to allow users access through the Citrix ADC. The administrator bound the policy to a specific vServer. Which policy expression will allow all users access through the vServer?

Accepted Answer

A)  true 
B)  false 
C)  ns_true 
D)  ns_false

Question 6

Scenario: A Citrix Administrator is running an e-commerce web service that uses backend SQL and RADIUS servers. The e-commerce platform runs on a web server using port 80, and a website status page on port 99 reports the status of all servers. Which monitor should the administrator choose to confirm the availability of the e-commerce solution?

Accepted Answer

A)  HTTP on port 99 
B)  HTTP-ECV on port 80 
C)  HTTP on port 80 
D)  HTTP_ECV on port 99

Question 7

Scenario: A Citrix Administrator executed the following commands on the Citrix ADC: > add policy dataset Admin_group ipv4 > bind policy dataset Admin_group 192.168.149.10 -index 11 > bind policy dataset Admin_group 192.168.149.39 -index 12 > bind policy Admin_group 192.168.149.49 -index 13 > add responder policy POL_1 "!(CLIENT.IP.SRC.TYPECAST_TEXT_T.CONTAINS_ANY(\"Admin_group\"))" RESET > bind lb vServer lb_vsrv_www -policyName POL_1 -priority 100 -gotoPriorityExpression END -type REQUEST What will be the effect of these commands?

Accepted Answer

A)  Only users with a source IP address of 192.168.149.10, 192.168.149.39, or 192.168.149.49 will be allowed to connect to vServer lb_vsrv_www. 
B)  Only users with a source IP address of 192.168.149.10, 192.168.149.39, or 192.168.149.49 will be blocked when attempting to connect to vServer lb_vsrv_www. 
C)  Only users with a source IP address of 192.168.149.10 or 192.168.149.39 will be allowed to connect to vServer lb_vsrv_www. 
D)  All traffic from users with a source IP address of 192.168.149.10, 192.168.149.39, or 192.168.149.49 will be blocked through the Citrix ADC.

Question 8

Scenario: After deploying a Citrix ADC in production, a Citrix Administrator notices that client requests are NOT being evenly distributed among backend resources. The administrator wants to change from the default load-balancing method to one that will help distribute the load more evenly. Which load-balancing method would ensure that the server with the least amount of network utilization is receiving new connections?

Accepted Answer

A)  Least connection 
B)  Least bandwidth 
C)  Least response time 
D)  Least packets

Question 9

What is the first thing a Citrix Administrator should develop when creating a server certificate for Citrix ADC to secure traffic?

Accepted Answer

A)  A private key 
B)  A certificate revocation list (CRL) 
C)  A certificate signing request (CSR) 
D)  A certificate key-pair

Question 10

Scenario: A Citrix ADC is configured with Interface 1/1 and bound to VLAN 40. A Citrix Administrator executed the below command: > bind vlan 10 -ifnum 1/1 What is the result of executing this command on the Citrix ADC?

Accepted Answer

A)  Interface 1/1 is bound to VLAN 20, and native VLAN is 20. 
B)  Interface 1/1 is bound to VLAN 20, and native VLAN is NOT changed. 
C)  Interface 1/1 is bound to VLAN 20, and native VLAN is 40. 
D)  Interface 1/1 is bound to VLAN 20, and native VLAN is 1.

Question 11

Scenario: A Citrix ADC MPX is using one of four available 10G ports. A Citrix Administrator discovers a traffic bottleneck at the Citrix ADC. What can the administrator do to increase bandwidth on the Citrix ADC?

Accepted Answer

A)  Purchase another Citrix ADC MPX appliance. 
B)  Plug another 10G Citrix ADC port into the router. 
C)  Add two more 10G Citrix ADC ports to the network and configure VLAN. 
D)  Add another 10G Citrix ADC port to the switch, and configure Link Aggregation Control Protocol (LACP).

Question 12

How can a Citrix Administrator configure a rewrite policy to change the version of HTTP from 1.1 to 1.0 in every request?

Accepted Answer

A)  >add rewrite action RW_ACT replace http.res.version "\"HTTPS/1.0\"" > add rewrite policy RW_POL true RW_ACT 
B)  >add rewrite action RW_ACT replace http.req.version "\"HTTPS/1.1\"" 
C)  >add rewrite action RW_ACT replace http.res.version "\"HTTPS/1.1\"" 
D)  >add rewrite action RW_ACT replace http.req.version "\"HTTPS/1.0\""

Question 13

Scenario: A Citrix Administrator gives permissions to team members to access their own admin partition. This will allow them to add resources for different departments and manage them without making changes to the default Citrix ADC partition and configuration. One team member typing to use the command line interface (CLI) to troubleshoot an authentication issue could NOT use aaad.debug. However, the team member has full permissions on the admin partition. What can be the cause of this issue?

Accepted Answer

A)  The team member is NOT using the CLI correctly. 
B)  The team member needs to troubleshoot the issue from the GUI. 
C)  The team member does NOT have permission to use the CLI. 
D)  The team member does NOT have shell access by design.

Question 14

Which Citrix ADC monitor can a Citrix Administrator use to check the authentication service of the Active Directory (AD) domain controller?

Accepted Answer

A)  An LDAP monitor with the LDAP Script Name, Configured Base DN, Bind DN, Filter, Attribute and Password parameters in the basic parameters. 
B)  A ping monitor with the IP address of the AD domain controller in the special parameters 
C)  A MYSQL-ECV monitor with the Base DN, Bind DN, Filter, Attribute, and Password parameters configured in the basic parameters 
D)  A TCP monitor with the LDAP Base DN configured in the basic parameters.

Question 15

A Citrix Administrator needs to use a client's IP address as the source IP address for Citrix ADC-to-server connections. Which Citrix ADC mode can the administrator use to meet this requirement?

Accepted Answer

A)  USNIP 
B)  Layer 2 
C)  Layer 3 
D)  USIP

Question 16

Scenario: A Citrix Administrator configured a global server load balancing (GSLB) setup for internal and external users using the same host name. For internal users, cvad.citrite.net should go to the Citrix StoreFront site; for external users, it should connect to the Citrix ADC Gateway VPN site. Which feature should the administrator configure to accomplish this?

Accepted Answer

A)  DNS Preferred Location 
B)  DNS Record 
C)  DNS View 
D)  DNS Proxy

Question 17

Scenario: POLICY 1: add rewrite action ACT_1 corrupt_http_header Accept-Encoding add rewrite policy POL_1 HTTPS.REQ.IS_VALID ACT_1 POLICY 2: add rewrite action ACT_2 insert_http_header Accept-Encoding "\"identity\"" add rewrite policy POL_2 "HTTP.REQ.IS_VALID " ACT_2 How can a Citrix Administrator successfully bind the above rewrite policies to the load-balancing vServer lb_vsrv so that POL_2 is evaluated after POL_2 is evaluated?

Accepted Answer

A)  bind lb vServer lb_vsrv -policyName POL_1 -priority 110 -gotoPriorityExpression NEXT -type REQUEST bind lb vServer lb_vsrv -policyName POL_2 -priority 100 -gotoPriorityExpression END -type REQUEST 
B)  bind lb vServer lb_vsrv -policyName POL_1 -priority 90 -gotoPriorityExpression NEXT -type REQUEST 
C)  bind lb vServer lb_vsrv -policyName POL_1 -priority 90 -gotoPriorityExpression END -type REQUEST bind lb vServer lb_vsrv -policyName POL_2 -priority 80 -gotoPriorityExpression NEXT -type REQUEST 
D)  bind lb vServer lb_vsrv -policyName POL_1 -priority 90 -type REQUEST bind lb vServer lb_vsrv -policyName POL_2 -priority 100 -type REQUEST

Exam 3: Deploy and Manage Citrix ADC 13 with Traffic Management