Exam 22: Current and Resistance

arrow
  • Select Tags
search iconSearch Question
flashcardsStudy Flashcards
  • Select Tags

A electric heater that draws 13.5 A of dc current has been left on for 10 min. How many electrons that have passed through the heater during that time? (e = 1.60 × 10-19 C)

(Multiple Choice)
4.8/5
(92)

If we double the resistance in a circuit but keep the current in it constant, the power dissipated by that circuit will

(Multiple Choice)
4.8/5
(82)

A 1500-W heater is connected to a 120-V line for 2.0 hours. How much heat energy is produced?

(Multiple Choice)
4.8/5
(83)

When a current flows through an ionic liquid such as salty water, the moving charges are

(Multiple Choice)
4.9/5
(82)

The resistivity of a 1.0 m long copper wire is 1.72 × 10-8 Ω ∙ m and its cross sectional area is 2.0 × 10-6 m2. If the wire carries a current of 0.20 A, what is the voltage across the wire?

(Multiple Choice)
4.9/5
(86)

The current through a piece of lab equipment must be limited to 2.75 A when it is run by a 120-V dc power supply. What must be the resistance of this equipment?

(Short Answer)
4.9/5
(71)

A simple circuit has a total resistance of 30 Ω. If a 2.0-A current is maintained in this circuit, how much energy is dissipated in this circuit in 4.0 seconds?

(Multiple Choice)
4.9/5
(87)

The length of a certain wire is doubled while its radius is kept constant. What is the new resistance of this wire?

(Multiple Choice)
4.9/5
(72)

If a quantity you calculated has units of kg⋅m2 s2⋅C\frac { \mathrm { kg } \cdot \mathrm { m } ^ { 2 } } { \mathrm {~s} ^ { 2 } \cdot \mathrm { C } } , what is that quantity?

(Multiple Choice)
4.9/5
(80)

For the graph shown in the figure, what physical quantity does the slope of the graph represent for ohmic material? For the graph shown in the figure, what physical quantity does the slope of the graph represent for ohmic material?

(Multiple Choice)
4.9/5
(75)

A 200-Ω resistor is rated at 1/4 W. What is the maximum current it can safely draw?

(Multiple Choice)
4.8/5
(78)

When a 1.0-m length of metal wire is connected to a 1.5−V1.5 - V battery, a current of 8.0  mA{~mA} flows through it. What is the diameter of the wire? The resistivity of the metal is 2.24 × 10-8 Ω ∙ m.

(Multiple Choice)
4.8/5
(68)

When a current flows through a metal wire, the moving charges are

(Multiple Choice)
4.7/5
(80)

A certain metal has a resistivity of 1.68 × 10-8 Ω ∙ m. You have a long spool of wire made from this metal. If this wire has a diameter of 0.15 mm, how long should you cut a segment so its resistance will be 15 Ω?

(Multiple Choice)
4.9/5
(82)

When 5.00 A is flowing through an 10.0-Ω device, how much power is being dissipated in the device?

(Multiple Choice)
4.9/5
(79)

A resistance heater is rated at 1200 W when operating at 110 V dc. What current will it draw?

(Multiple Choice)
4.7/5
(78)

A resistor operated at 120 V dc is rated at 1.40 kW. (a) What is the normal operating current through the resistor? (b) What is the resistance of the resistor?

(Short Answer)
4.7/5
(78)

The resistivity of gold is 2.44×10−8Ω⋅m2.44 \times 10 ^{- 8} \Omega \cdot \mathrm { m } at a temperature of 20°C. A gold wire, 1.8 mm in diameter and 14 cm long, carries a current of 480 mA. What power is dissipated in this wire at 20°C?

(Multiple Choice)
4.8/5
(86)

A 100-W light bulb is operated by a 110-V dc source. What is the resistance of this bulb?

(Multiple Choice)
4.8/5
(83)

You are given a copper bar of dimensions 3 cm × 5 cm × 8 cm and asked to attach leads to it in order to make a resistor. If you want to achieve the smallest possible resistance, you should attach the leads to the opposite faces that measure

(Multiple Choice)
4.8/5
(84)
Showing 101 - 120 of 125
close modal

Filters

  • Essay(0)
  • Multiple Choice(0)
  • Short Answer(0)
  • True False(0)
  • Matching(0)