Question 1

On some parts of an assembly print leader lines with arrowheads are used, and on other parts of the print, leader lines with dots are used.

Accepted Answer

A) True 
 B)False

Question 2

Which branch of a company can request engineering changes to prints?

Accepted Answer

Any branch of a company that d

Question 3

If dimensions on a part have changed from the original, then the print must be redone, or a "not to scale" symbol put with the print.

Accepted Answer

A) True 
 B)False

Question 4

A prototype is a model or original design that has not been released for production.

Accepted Answer

A) True 
 B)False

Question 5

When the limits of operation of an assembly are shown in phantom lines, it is generally in a ____.

Accepted Answer

A)  layout assembly 
B)  general assembly 
C)  design assembly 
D)  both a and c 
E)  none of the above 
A)  layout assembly 
B)  general assembly 
C)  design assembly 
D)  both a and c 
E)  none of the above

Question 6

Pictorial assemblies can also take the form of exploded technical illustrations.

Accepted Answer

A) True 
 B)False

Question 7

What are standard parts?

Accepted Answer

Standard parts are items that

Question 8

____ is (are) only necessary in assembly prints when a certain distance between parts must exist before proper assembly can take place.

Accepted Answer

A)  A scale 
B)  Assembly dimensions 
C)  A sectional view 
D)  Dimensions 
E)  none of the above 
A)  A scale 
B)  Assembly dimensions 
C)  A sectional view 
D)  Dimensions 
E)  none of the above

Question 9

A parts list and a list of materials are always interchangeable.

Accepted Answer

A) True 
 B)False

Question 10

The ASME document ASME Y14.1, recommends the revision history block be placed in ____ of the sheet.

Accepted Answer

A)  the upper left corner 
B)  the upper right corner 
C)  the lower right corner 
D)  the lower left corner 
E)  a separate file 
A)  the upper left corner 
B)  the upper right corner 
C)  the lower right corner 
D)  the lower left corner 
E)  a separate file

Question 11

Records of changes are kept so reference can be made between the existing and proposed product.

Accepted Answer

A) True 
 B)False

Question 12

What is an engineering change notice?

Accepted Answer

The ECN describes the part as

Question 13

In some cases, ____ key the detail prints to the assembly and parts list, and key the assembly print and parts list to the page on which the detail print is found.

Accepted Answer

A)  ECN 
B)  identification numbers 
C)  balloons 
D)  both b and c 
E)  none of the above 
A)  ECN 
B)  identification numbers 
C)  balloons 
D)  both b and c 
E)  none of the above

Question 14

List four types of assembly prints used in industry.

Accepted Answer

Any four of the following:
Lay

Question 15

Letters are common to show in revision balloons so they can be differentiated from balloon numbers on assembly prints.

Accepted Answer

A) True 
 B)False

Question 16

It is always important to include dimensions on assembly prints.

Accepted Answer

A) True 
 B)False

Question 17

The balloon part identification number correlates to the same number identifying the part in the parts list.

Accepted Answer

A) True 
 B)False

Question 18

Machining processes and other specifications are generally not given on a(n) ____ unless a machining operation must take place after two or more parts are assembled.

Accepted Answer

A)  detail print 
B)  parts list 
C)  ECN 
D)  ECR 
E)  none of the above 
A)  detail print 
B)  parts list 
C)  ECN 
D)  ECR 
E)  none of the above

Question 19

Isometric assembly prints are basically the same thing as ____.

Accepted Answer

A)  monodetail prints 
B)  the product catalog 
C)  the layout assembly prints 
D)  technical illustrations 
E)  none of the above 
A)  monodetail prints 
B)  the product catalog 
C)  the layout assembly prints 
D)  technical illustrations 
E)  none of the above

Question 20

Standard parts are the only parts that need to be drawn.

Accepted Answer

A) True 
 B)False

On some parts of an assembly print leader lines with arrowheads are used, and on other parts of the print, leader lines with dots are used.

Which branch of a company can request engineering changes to prints?

If dimensions on a part have changed from the original, then the print must be redone, or a "not to scale" symbol put with the print.

A prototype is a model or original design that has not been released for production.

When the limits of operation of an assembly are shown in phantom lines, it is generally in a ____.

Pictorial assemblies can also take the form of exploded technical illustrations.

What are standard parts?

____ is (are) only necessary in assembly prints when a certain distance between parts must exist before proper assembly can take place.

A parts list and a list of materials are always interchangeable.

The ASME document ASME Y14.1, recommends the revision history block be placed in ____ of the sheet.

Records of changes are kept so reference can be made between the existing and proposed product.

What is an engineering change notice?

In some cases, ____ key the detail prints to the assembly and parts list, and key the assembly print and parts list to the page on which the detail print is found.

List four types of assembly prints used in industry.

Letters are common to show in revision balloons so they can be differentiated from balloon numbers on assembly prints.

It is always important to include dimensions on assembly prints.

The balloon part identification number correlates to the same number identifying the part in the parts list.

Machining processes and other specifications are generally not given on a(n) ____ unless a machining operation must take place after two or more parts are assembled.

Isometric assembly prints are basically the same thing as ____.

Standard parts are the only parts that need to be drawn.

Introduction to Engineering and Manufacturing Technology Print Reading

Communicating with a Sketch

Scales and Precision Measurement

Reading Lines and Lettering on a Print

Reading Multiviews

Reading Auxiliary Views

Manufacturing Materials and Processes

Reading Dimensions

Reading Prints With Fasteners and Springs

Reading Sections, Revolutions, and Conventional Breaks

Reading Geometric Dimensioning and Tolerancing

Reading Linkage, Cam, Gear, and Bearing Prints

Reading Precision Sheet Metal Prints

Welding Processes and Reading Welding Representations

Reading Prints of Pictorial Drawings

Reading Electrical Diagrams and Schematics

Filters

Exam 14: Reading Prints of Working Drawings

On some parts of an assembly print leader lines with arrowheads are used, and on other parts of the print, leader lines with dots are used.

Which branch of a company can request engineering changes to prints?

If dimensions on a part have changed from the original, then the print must be redone, or a "not to scale" symbol put with the print.

A prototype is a model or original design that has not been released for production.

When the limits of operation of an assembly are shown in phantom lines, it is generally in a ____.

Pictorial assemblies can also take the form of exploded technical illustrations.

What are standard parts?

____ is (are) only necessary in assembly prints when a certain distance between parts must exist before proper assembly can take place.

A parts list and a list of materials are always interchangeable.

The ASME document ASME Y14.1, recommends the revision history block be placed in ____ of the sheet.

Records of changes are kept so reference can be made between the existing and proposed product.

What is an engineering change notice?

In some cases, ____ key the detail prints to the assembly and parts list, and key the assembly print and parts list to the page on which the detail print is found.

List four types of assembly prints used in industry.

Letters are common to show in revision balloons so they can be differentiated from balloon numbers on assembly prints.

It is always important to include dimensions on assembly prints.

The balloon part identification number correlates to the same number identifying the part in the parts list.

Machining processes and other specifications are generally not given on a(n) ____ unless a machining operation must take place after two or more parts are assembled.

Isometric assembly prints are basically the same thing as ____.

Standard parts are the only parts that need to be drawn.

Introduction to Engineering and Manufacturing Technology Print Reading

Communicating with a Sketch

Scales and Precision Measurement

Reading Lines and Lettering on a Print

Reading Multiviews

Reading Auxiliary Views

Manufacturing Materials and Processes

Reading Dimensions

Reading Prints With Fasteners and Springs

Reading Sections, Revolutions, and Conventional Breaks

Reading Geometric Dimensioning and Tolerancing

Reading Linkage, Cam, Gear, and Bearing Prints

Reading Precision Sheet Metal Prints

Welding Processes and Reading Welding Representations

Reading Prints of Pictorial Drawings

Reading Electrical Diagrams and Schematics

Filters