Question 1

The result of a casting print is the fabrication of a part.

Accepted Answer

A) True 
 B)False

Question 2

When plating such as chromium, copper, and brass, or coatings such as galvanizing, polyurethane, and silicone, are applied to a part or feature, the specified dimensions ____.

Accepted Answer

A)  should not be defined in relationship to the coating or plating process 
B)  should be defined in relationship to the coating or plating process 
C)  can be found in the reference tables that describe the coating or plating process 
D)  both b and c 
E)  none of the above 
A)  should not be defined in relationship to the coating or plating process 
B)  should be defined in relationship to the coating or plating process 
C)  can be found in the reference tables that describe the coating or plating process 
D)  both b and c 
E)  none of the above

Question 3

This is the general term applied to describe a physical portion of a part or object, such as a surface, slot, tab, pin, keyseat, or hole.

Accepted Answer

A)  feature 
B)  Feature of size 
C)  datum 
D)  none of the above 
A)  feature 
B)  Feature of size 
C)  datum 
D)  none of the above

Question 4

Force or shrink fits constitute a special type of interference fit normally characterized by maintenance of intermittent bore pressures throughout its range of sizes.

Accepted Answer

A) True 
 B)False

Question 5

An ISO 9000 certification is obtained by passing an inspection by the company management team.

Accepted Answer

A) True 
 B)False

Question 6

The LMC of an internal feature is its lower limit.

Accepted Answer

A) True 
 B)False

Question 7

____ usually show draft.

Accepted Answer

A)  Machining prints 
B)  Casting prints 
C)  Investment casting prints 
D)  Forging detail prints 
E)  none of the above 
A)  Machining prints 
B)  Casting prints 
C)  Investment casting prints 
D)  Forging detail prints 
E)  none of the above

Question 8

Angular surfaces are never dimensioned as coordinates, as angles and degrees, or as a flat taper.

Accepted Answer

A) True 
 B)False

Question 9

An interference fit is the condition that exists when due to the limits of the dimensions, mating parts must be pressed apart.

Accepted Answer

A) True 
 B)False

Question 10

In dimensioning, MMC is the smallest limit for an external feature and the largest limit for an internal feature.

Accepted Answer

A) True 
 B)False

Question 11

What is it called when the tolerance of each dimension builds on the next?

Accepted Answer

Known as t

Question 12

When foreshortened views occur, dimensions should be placed on the auxiliary view for clarity.

Accepted Answer

A) True 
 B)False

Question 13

Dimensions are never placed on views that provide the best size and shape description of an object.

Accepted Answer

A) True 
 B)False

Question 14

As with other casting design characteristics, the machining allowance depends on ____.

Accepted Answer

A)  the casting process 
B)  the number of fillets and rounds used 
C)  the type of material used 
D)  both a and c 
E)  none of the above 
A)  the casting process 
B)  the number of fillets and rounds used 
C)  the type of material used 
D)  both a and c 
E)  none of the above

Question 15

The forging print shows the ____ that relate only to the production of the forging.

Accepted Answer

A)  views 
B)  specifications 
C)  dimensions 
D)  both b and c 
E)  all of the above 
A)  views 
B)  specifications 
C)  dimensions 
D)  both b and c 
E)  all of the above

Question 16

____ fits are intended to provide a similar running performance with suitable lubrication allowance throughout their range of sizes.

Accepted Answer

A)  Locational 
B)  Running and sliding 
C)  Transitional 
D)  Force 
E)  none of the above 
A)  Locational 
B)  Running and sliding 
C)  Transitional 
D)  Force 
E)  none of the above

Question 17

Notes are a type of dimension that generally identify the size of a feature, or features with more than a numerical specification.

Accepted Answer

A) True 
 B)False

Question 18

This is a smooth curve without sharp changes in direction over any portion of its length.

Accepted Answer

A)  tangent curve 
B)  fair curve 
C)  smooth curve 
D)  none of the above 
A)  tangent curve 
B)  fair curve 
C)  smooth curve 
D)  none of the above

Question 19

Statistical tolerancing is the assigning of tolerances to related dimensions in an assembly based on the requirements of statistical progress conditions.

Accepted Answer

A) True 
 B)False

Question 20

This is the measured size of a feature or part after manufacturing.

Accepted Answer

A)  finish size 
B)  actual size 
C)  manufactured size 
D)  none of the above 
A)  finish size 
B)  actual size 
C)  manufactured size 
D)  none of the above

The result of a casting print is the fabrication of a part.

When plating such as chromium, copper, and brass, or coatings such as galvanizing, polyurethane, and silicone, are applied to a part or feature, the specified dimensions ____.

This is the general term applied to describe a physical portion of a part or object, such as a surface, slot, tab, pin, keyseat, or hole.

Force or shrink fits constitute a special type of interference fit normally characterized by maintenance of intermittent bore pressures throughout its range of sizes.

An ISO 9000 certification is obtained by passing an inspection by the company management team.

The LMC of an internal feature is its lower limit.

____ usually show draft.

Angular surfaces are never dimensioned as coordinates, as angles and degrees, or as a flat taper.

An interference fit is the condition that exists when due to the limits of the dimensions, mating parts must be pressed apart.

In dimensioning, MMC is the smallest limit for an external feature and the largest limit for an internal feature.

What is it called when the tolerance of each dimension builds on the next?

When foreshortened views occur, dimensions should be placed on the auxiliary view for clarity.

Dimensions are never placed on views that provide the best size and shape description of an object.

As with other casting design characteristics, the machining allowance depends on ____.

The forging print shows the ____ that relate only to the production of the forging.

____ fits are intended to provide a similar running performance with suitable lubrication allowance throughout their range of sizes.

Notes are a type of dimension that generally identify the size of a feature, or features with more than a numerical specification.

This is a smooth curve without sharp changes in direction over any portion of its length.

Statistical tolerancing is the assigning of tolerances to related dimensions in an assembly based on the requirements of statistical progress conditions.

This is the measured size of a feature or part after manufacturing.

Introduction to Engineering and Manufacturing Technology Print Reading

Communicating with a Sketch

Scales and Precision Measurement

Reading Lines and Lettering on a Print

Reading Multiviews

Reading Auxiliary Views

Manufacturing Materials and Processes

Reading Prints With Fasteners and Springs

Reading Sections, Revolutions, and Conventional Breaks

Reading Geometric Dimensioning and Tolerancing

Reading Linkage, Cam, Gear, and Bearing Prints

Reading Precision Sheet Metal Prints

Reading Prints of Working Drawings

Welding Processes and Reading Welding Representations

Reading Prints of Pictorial Drawings

Reading Electrical Diagrams and Schematics

Filters

Exam 8: Reading Dimensions

The result of a casting print is the fabrication of a part.

When plating such as chromium, copper, and brass, or coatings such as galvanizing, polyurethane, and silicone, are applied to a part or feature, the specified dimensions ____.

This is the general term applied to describe a physical portion of a part or object, such as a surface, slot, tab, pin, keyseat, or hole.

Force or shrink fits constitute a special type of interference fit normally characterized by maintenance of intermittent bore pressures throughout its range of sizes.

An ISO 9000 certification is obtained by passing an inspection by the company management team.

The LMC of an internal feature is its lower limit.

____ usually show draft.

Angular surfaces are never dimensioned as coordinates, as angles and degrees, or as a flat taper.

An interference fit is the condition that exists when due to the limits of the dimensions, mating parts must be pressed apart.

In dimensioning, MMC is the smallest limit for an external feature and the largest limit for an internal feature.

What is it called when the tolerance of each dimension builds on the next?

When foreshortened views occur, dimensions should be placed on the auxiliary view for clarity.

Dimensions are never placed on views that provide the best size and shape description of an object.

As with other casting design characteristics, the machining allowance depends on ____.

The forging print shows the ____ that relate only to the production of the forging.

____ fits are intended to provide a similar running performance with suitable lubrication allowance throughout their range of sizes.

Notes are a type of dimension that generally identify the size of a feature, or features with more than a numerical specification.

This is a smooth curve without sharp changes in direction over any portion of its length.

Statistical tolerancing is the assigning of tolerances to related dimensions in an assembly based on the requirements of statistical progress conditions.

This is the measured size of a feature or part after manufacturing.

Introduction to Engineering and Manufacturing Technology Print Reading

Communicating with a Sketch

Scales and Precision Measurement

Reading Lines and Lettering on a Print

Reading Multiviews

Reading Auxiliary Views

Manufacturing Materials and Processes

Reading Prints With Fasteners and Springs

Reading Sections, Revolutions, and Conventional Breaks

Reading Geometric Dimensioning and Tolerancing

Reading Linkage, Cam, Gear, and Bearing Prints

Reading Precision Sheet Metal Prints

Reading Prints of Working Drawings

Welding Processes and Reading Welding Representations

Reading Prints of Pictorial Drawings

Reading Electrical Diagrams and Schematics

Filters