Question 1

Momentary traffic peaks can lead to ________.

Accepted Answer

A) latency 
B) packet loss 
C) both A and B 
D) neither A nor B 
A) latency 
B) packet loss 
C) both A and B 
D) neither A nor B

Question 2

When a firewall policy server is used to manage SPI firewalls,what device creates specific ACL rules?

Accepted Answer

A) the policy server 
B) the SNMP manager 
C) individual firewalls 
D) none of the above 
A) the policy server 
B) the SNMP manager 
C) individual firewalls 
D) none of the above

Question 3

An SLA for availability should specify a ________.

Accepted Answer

A) maximum availability 
B) minimum availability 
C) both A and B 
D) neither A nor B 
A) maximum availability 
B) minimum availability 
C) both A and B 
D) neither A nor B

Question 4

SNMP Set commands can ________.

Accepted Answer

A) ask agents for information about the managed device 
B) reroute traffic 
C) both A and B 
D) neither A nor B 
A) ask agents for information about the managed device 
B) reroute traffic 
C) both A and B 
D) neither A nor B

Question 5

Transmission speed is normally measured in ________.

Accepted Answer

A) bits per second 
B) bytes per second 
C) octet per second 
D) none of the above 
A) bits per second 
B) bytes per second 
C) octet per second 
D) none of the above

Question 6

Implementation guidance is less specific than ________.

Accepted Answer

A) policy 
B) implementation 
C) standards 
D) none of the above 
A) policy 
B) implementation 
C) standards 
D) none of the above

Question 7

Which of the following is latency intolerant?

Accepted Answer

A) video 
B) e-mail 
C) both A and B 
D) neither A nor B 
A) video 
B) e-mail 
C) both A and B 
D) neither A nor B

Question 8

Policies should drive ________.

Accepted Answer

A) implementation 
B) oversight 
C) both A and B 
D) neither A nor B 
A) implementation 
B) oversight 
C) both A and B 
D) neither A nor B

Question 9

SNMP ________ commands can change how managed devices operate.

Accepted Answer

A) Get 
B) Set 
C) both A and B 
D) neither A nor B 
A) Get 
B) Set 
C) both A and B 
D) neither A nor B

Question 10

Which of the following is true?

Accepted Answer

A) Guidelines must be followed. 
B) Guidelines must be considered. 
C) both A and B 
D) neither A nor B 
A) Guidelines must be followed. 
B) Guidelines must be considered. 
C) both A and B 
D) neither A nor B

Question 11

Latency is usually measured in ________.

Accepted Answer

A) bits per second (bps) 
B) milliseconds (ms) 
C) minutes of downtime 
D) none of the above 
A) bits per second (bps) 
B) milliseconds (ms) 
C) minutes of downtime 
D) none of the above

Question 12

Another term for authorization is ________.

Accepted Answer

A) authentication 
B) token 
C) establishing the creator of a file 
D) permission 
A) authentication 
B) token 
C) establishing the creator of a file 
D) permission

Question 13

In QoS,the S stands for ________.

Accepted Answer

A) software 
B) security 
C) service 
D) satisfaction 
A) software 
B) security 
C) service 
D) satisfaction

Question 14

Which of the following is NOT one of the four major security planning principles?

Accepted Answer

A) perimeter defense 
B) risk analysis 
C) comprehensive security 
D) defense in depth 
A) perimeter defense 
B) risk analysis 
C) comprehensive security 
D) defense in depth

Question 15

An SLA for latency should specify a ________.

Accepted Answer

A) maximum latency 
B) minimum latency 
C) both A and B 
D) neither A nor B 
A) maximum latency 
B) minimum latency 
C) both A and B 
D) neither A nor B

Question 16

Priority addresses the problem of ________.

Accepted Answer

A) momentary traffic peaks 
B) chronic under-capacity 
C) both A and B 
D) neither A nor B 
A) momentary traffic peaks 
B) chronic under-capacity 
C) both A and B 
D) neither A nor B

Question 17

Oversight activities include ________.

Accepted Answer

A) vulnerability testing 
B) creating guidelines 
C) both A and B 
D) neither A nor B 
A) vulnerability testing 
B) creating guidelines 
C) both A and B 
D) neither A nor B

Question 18

An attacker must break through two firewalls to get to a host.This illustrates the principle called ________.(Select the most specific answer.)

Accepted Answer

A) comprehensive security 
B) risk assurance 
C) having a DMZ 
D) defense in depth 
A) comprehensive security 
B) risk assurance 
C) having a DMZ 
D) defense in depth

Question 19

Which of the following specifies what should be done?

Accepted Answer

A) policies 
B) implementation 
C) both A and B 
D) neither A nor B 
A) policies 
B) implementation 
C) both A and B 
D) neither A nor B

Question 20

When a packet travels through a network,the time it takes to get from the sender to the receiver is called ________.

Accepted Answer

A) latency 
B) milliseconds 
C) jitter 
D) throughput 
A) latency 
B) milliseconds 
C) jitter 
D) throughput

Momentary traffic peaks can lead to ________.

When a firewall policy server is used to manage SPI firewalls,what device creates specific ACL rules?

An SLA for availability should specify a ________.

SNMP Set commands can ________.

Transmission speed is normally measured in ________.

Implementation guidance is less specific than ________.

Which of the following is latency intolerant?

Policies should drive ________.

SNMP ________ commands can change how managed devices operate.

Which of the following is true?

Latency is usually measured in ________.

Another term for authorization is ________.

In QoS,the S stands for ________.

Which of the following is NOT one of the four major security planning principles?

An SLA for latency should specify a ________.

Priority addresses the problem of ________.

Oversight activities include ________.

An attacker must break through two firewalls to get to a host.This illustrates the principle called ________.(Select the most specific answer.)

Which of the following specifies what should be done?

When a packet travels through a network,the time it takes to get from the sender to the receiver is called ________.

Welcome to the Cloud

Network Standards

Network Security

Ethernet 8023switched Lans

Wireless Lans I

Wireless Lans 2

Tcp-Ip Internet Working I

Tcp-Ip Internet Working 2

Carrier Wide Area Networks Wans

Networked Applications

Module a More on Tcp

Module B More on Modulation

Module C More on Telecommunications

Module D Directory Servers

Filters

Exam 4: Network and Security Management

Momentary traffic peaks can lead to ________.

When a firewall policy server is used to manage SPI firewalls,what device creates specific ACL rules?

An SLA for availability should specify a ________.

SNMP Set commands can ________.

Transmission speed is normally measured in ________.

Implementation guidance is less specific than ________.

Which of the following is latency intolerant?

Policies should drive ________.

SNMP ________ commands can change how managed devices operate.

Which of the following is true?

Latency is usually measured in ________.

Another term for authorization is ________.

In QoS,the S stands for ________.

Which of the following is NOT one of the four major security planning principles?

An SLA for latency should specify a ________.

Priority addresses the problem of ________.

Oversight activities include ________.

An attacker must break through two firewalls to get to a host.This illustrates the principle called ________.(Select the most specific answer.)

Which of the following specifies what should be done?

When a packet travels through a network,the time it takes to get from the sender to the receiver is called ________.

Welcome to the Cloud

Network Standards

Network Security

Ethernet 8023switched Lans

Wireless Lans I

Wireless Lans 2

Tcp-Ip Internet Working I

Tcp-Ip Internet Working 2

Carrier Wide Area Networks Wans

Networked Applications

Module a More on Tcp

Module B More on Modulation

Module C More on Telecommunications

Module D Directory Servers

Filters