Question 1

Which of the following is a private IP address range?

Accepted Answer

A) 10.x.x.x 
B) 128.171.x.x 
C) both A and B 
D) neither A nor B 
A) 10.x.x.x 
B) 128.171.x.x 
C) both A and B 
D) neither A nor B A

Question 2

In MPLS,the ________ adds the label to the packet.

Accepted Answer

A) source host 
B) first label-switching router 
C) both A and B 
D) neither A nor B 
A) source host 
B) first label-switching router 
C) both A and B 
D) neither A nor B B

Question 3

SNMPv3 uses ________ for authentication.

Accepted Answer

A) community names 
B) digital certificates and digital signatures 
C) a different password for each manager-agent pair 
D) all of the above 
A) community names 
B) digital certificates and digital signatures 
C) a different password for each manager-agent pair 
D) all of the above C

Question 4

A(n)________ is a message sent by an agent to let the manager know about a condition the agent has detected.Select the name used in the SNMP standard.

Accepted Answer

A) command 
B) trap 
C) alarm 
D) all of the above 
A) command 
B) trap 
C) alarm 
D) all of the above

Question 5

Servers are normally given ________ IP addresses.

Accepted Answer

A) well-known 
B) static 
C) dynamic 
D) none of the above 
A) well-known 
B) static 
C) dynamic 
D) none of the above

Question 6

IPsec is used for ________ VPNs.

Accepted Answer

A) remote-access 
B) site-to-site 
C) both A and B 
D) neither A nor B 
A) remote-access 
B) site-to-site 
C) both A and B 
D) neither A nor B

Question 7

In SNMP,the manager creates ________.

Accepted Answer

A) traps 
B) GET commands 
C) both A and B 
D) neither A nor B 
A) traps 
B) GET commands 
C) both A and B 
D) neither A nor B

Question 8

In NAT,the ________ creates new external source IP addresses and port numbers.

Accepted Answer

A) router 
B) firewall 
C) source host 
D) destination host 
A) router 
B) firewall 
C) source host 
D) destination host

Question 9

The main limit of IPsec tunnel mode protection compared to transport mode protection in IPsec is ________.

Accepted Answer

A) protection over only part of the route 
B) higher cost 
C) both A and B 
D) neither A nor B 
A) protection over only part of the route 
B) higher cost 
C) both A and B 
D) neither A nor B

Question 10

Label-switching routers do NOT look at the IP address of an arriving packet.

Accepted Answer

A) True 
 B)False

Question 11

".edu" is a generic top-level domain.

Accepted Answer

A) True 
 B)False

Question 12

In SNMP,the manager creates both commands and responses.

Accepted Answer

A) True 
 B)False

Question 13

The highest-level DNS servers are called ________.

Accepted Answer

A) root servers 
B) top-level servers 
C) both A and B 
D) neither A nor B 
A) root servers 
B) top-level servers 
C) both A and B 
D) neither A nor B

Question 14

In SNMP,Set commands tell the agent to change a parameter on the managed device.

Accepted Answer

A) True 
 B)False

Question 15

How many DNS root servers are there?

Accepted Answer

A) 1 
B) 2 
C) 10 
D) 13 
A) 1 
B) 2 
C) 10 
D) 13

Question 16

The router advertisement protocol may ________.

Accepted Answer

A) give the client a routing prefix 
B) give the client a subnet ID 
C) both A and B 
D) neither A nor B 
A) give the client a routing prefix 
B) give the client a subnet ID 
C) both A and B 
D) neither A nor B

Question 17

SNMPv1 uses ________ for authentication.

Accepted Answer

A) community names 
B) digital certificates and digital signatures 
C) a different password for each manager-agent pair 
D) all of the above 
A) community names 
B) digital certificates and digital signatures 
C) a different password for each manager-agent pair 
D) all of the above

Question 18

The part of an IPv6 global unicast address that designates the host is called the ________.

Accepted Answer

A) host part 
B) interface ID 
C) routing prefix 
D) We cannot say. 
A) host part 
B) interface ID 
C) routing prefix 
D) We cannot say.

Question 19

In SNMP,the agent can create commands.

Accepted Answer

A) True 
 B)False

Question 20

Your firm has an 8-bit network part and an 8-bit subnet part.How many hosts can you have?

Accepted Answer

A) 8 
B) 16 
C) 254 
D) 65,534 
A) 8 
B) 16 
C) 254 
D) 65,534

Which of the following is a private IP address range?

In MPLS,the ________ adds the label to the packet.

SNMPv3 uses ________ for authentication.

A(n)________ is a message sent by an agent to let the manager know about a condition the agent has detected.Select the name used in the SNMP standard.

Servers are normally given ________ IP addresses.

IPsec is used for ________ VPNs.

In SNMP,the manager creates ________.

In NAT,the ________ creates new external source IP addresses and port numbers.

The main limit of IPsec tunnel mode protection compared to transport mode protection in IPsec is ________.

Label-switching routers do NOT look at the IP address of an arriving packet.

".edu" is a generic top-level domain.

In SNMP,the manager creates both commands and responses.

The highest-level DNS servers are called ________.

In SNMP,Set commands tell the agent to change a parameter on the managed device.

How many DNS root servers are there?

The router advertisement protocol may ________.

SNMPv1 uses ________ for authentication.

The part of an IPv6 global unicast address that designates the host is called the ________.

In SNMP,the agent can create commands.

Your firm has an 8-bit network part and an 8-bit subnet part.How many hosts can you have?

Welcome to the Cloud

Network Standards

Network Security

Network Management

Wired Ethernet Lans

Wireless Lans I

Wireless Lans 2

Tcpip Internetworking I

Wide Area Networks

Networked Applications

Module a More on Tcp

Module B More on Modulation

Module C More on Telecommunications

Module D Directory Servers

Filters

Exam 9: Tcpip Internetworking 2

Which of the following is a private IP address range?

In MPLS,the ________ adds the label to the packet.

SNMPv3 uses ________ for authentication.

A(n)________ is a message sent by an agent to let the manager know about a condition the agent has detected.Select the name used in the SNMP standard.

Servers are normally given ________ IP addresses.

IPsec is used for ________ VPNs.

In SNMP,the manager creates ________.

In NAT,the ________ creates new external source IP addresses and port numbers.

The main limit of IPsec tunnel mode protection compared to transport mode protection in IPsec is ________.

Label-switching routers do NOT look at the IP address of an arriving packet.

".edu" is a generic top-level domain.

In SNMP,the manager creates both commands and responses.

The highest-level DNS servers are called ________.

In SNMP,Set commands tell the agent to change a parameter on the managed device.

How many DNS root servers are there?

The router advertisement protocol may ________.

SNMPv1 uses ________ for authentication.

The part of an IPv6 global unicast address that designates the host is called the ________.

In SNMP,the agent can create commands.

Your firm has an 8-bit network part and an 8-bit subnet part.How many hosts can you have?

Welcome to the Cloud

Network Standards

Network Security

Network Management

Wired Ethernet Lans

Wireless Lans I

Wireless Lans 2

Tcpip Internetworking I

Wide Area Networks

Networked Applications

Module a More on Tcp

Module B More on Modulation

Module C More on Telecommunications

Module D Directory Servers

Filters