Question 1

The maximum allowable voltage that a resistor can safely withstand without internal arcing is called the

Accepted Answer

A)  maximum arcing voltage rating 
B)  maximum working voltage rating 
C)  maximum internal voltage rating 
D)  maximum power voltage rating 
A)  maximum arcing voltage rating 
B)  maximum working voltage rating 
C)  maximum internal voltage rating 
D)  maximum power voltage rating

Question 2

One ______________ is the amount of current through a one-ohm resistance that has one volt of potential difference applied across it.

Accepted Answer

The answer of One ______________ is the amount of current...

Question 3

What is the resistor safety factor that allows the resistor to operate without breaking down from excessive heat?

Accepted Answer

A)  2 
B)  3 
C)  4 
D)  5 
A)  2 
B)  3 
C)  4 
D)  5

Question 4

Some material whose elements have an atomic structure that allows free electrons to drift through it with more or less force applied is a

Accepted Answer

A)  conductance 
B)  joule 
C)  short 
D)  resistance 
A)  conductance 
B)  joule 
C)  short 
D)  resistance

Question 5

A graph that shows how much current a resistor allows for different voltages is called the

Accepted Answer

A)  watt-hour characteristic of R 
B)  volt-ampere characteristic of R 
C)  volt-ohm characteristic of R 
D)  joule-ampere characteristic of R 
A)  watt-hour characteristic of R 
B)  volt-ampere characteristic of R 
C)  volt-ohm characteristic of R 
D)  joule-ampere characteristic of R

Question 6

What is the power in a circuit where the source of 100 V produces 2 A in a 50-? R?

Accepted Answer

A)  200 W 
B)  20 W 
C)  2 W 
D)  2 KW 
A)  200 W 
B)  20 W 
C)  2 W 
D)  2 KW

Question 7

Ohm's law states that the amount of current is directly proportional to the voltage and inversely proportional to the resistance.

Accepted Answer

A) True 
 B)False

Question 8

Ohm's law states that current is ______________ proportional to resistance.

Accepted Answer

The answer of Ohm's law states that current is ______________...

Question 9

Whenever there is current through a resistance, it must have a potential difference across its two ends equal to the IR sum.

Accepted Answer

A) True 
 B)False

Question 10

A resistance can be considered some material whose elements have an atomic structure that allows free electrons to drift through it with more or less force applied.

Accepted Answer

A) True 
 B)False

Question 11

One ampere is the amount of current through a one-ohm resistance that has one volt of potential difference applied across it.

Accepted Answer

A) True 
 B)False

Question 12

When the current flow in a circuit becomes excessive, a resistor is more likely to

Accepted Answer

A)  short 
B)  open 
C)  hum 
D)  get very cold 
A)  short 
B)  open 
C)  hum 
D)  get very cold

Question 13

One horsepower (hp) is equal to three-quarter kilowatt.

Accepted Answer

A) True 
 B)False

Question 14

A straight-line graph shows that a resistor is nonlinear.

Accepted Answer

A) True 
 B)False

Question 15

The Ohm's law formula states that V and I are ______________ proportional for any one value of R.

Accepted Answer

The answer of The Ohm's law formula states that V...

Question 16

The rate at which charge is forced to move by voltage is called

Accepted Answer

A)  electric power 
B)  horsepower 
C)  watt-hours 
D)  joules 
A)  electric power 
B)  horsepower 
C)  watt-hours 
D)  joules

Question 17

Whenever there is current through a resistance, it must have a potential difference across its two ends equal to the ______________ product.

Accepted Answer

The answer of Whenever there is current through a resistance,...

Question 18

A graph referred to as the volt-ampere characteristic of R shows how much resistance exists for different currents.

Accepted Answer

A) True 
 B)False

Question 19

One of the best safety rules is to

Accepted Answer

A)  work on circuits with power disconnected whenever possible 
B)  work while standing on earth ground 
C)  work with power connected whenever possible 
D)  work with both hands in your pockets 
A)  work on circuits with power disconnected whenever possible 
B)  work while standing on earth ground 
C)  work with power connected whenever possible 
D)  work with both hands in your pockets

Question 20

The fact is that high-voltage circuits usually do have small values of current in electronic equipment.

Accepted Answer

A) True 
 B)False

Exam 4: Ohms Law

The maximum allowable voltage that a resistor can safely withstand without internal arcing is called the

One ______________ is the amount of current through a one-ohm resistance that has one volt of potential difference applied across it.

What is the resistor safety factor that allows the resistor to operate without breaking down from excessive heat?

Some material whose elements have an atomic structure that allows free electrons to drift through it with more or less force applied is a

A graph that shows how much current a resistor allows for different voltages is called the

What is the power in a circuit where the source of 100 V produces 2 A in a 50-? R?

Ohm's law states that the amount of current is directly proportional to the voltage and inversely proportional to the resistance.

Ohm's law states that current is ______________ proportional to resistance.

Whenever there is current through a resistance, it must have a potential difference across its two ends equal to the IR sum.

A resistance can be considered some material whose elements have an atomic structure that allows free electrons to drift through it with more or less force applied.

One ampere is the amount of current through a one-ohm resistance that has one volt of potential difference applied across it.

When the current flow in a circuit becomes excessive, a resistor is more likely to

One horsepower (hp) is equal to three-quarter kilowatt.

A straight-line graph shows that a resistor is nonlinear.

The Ohm's law formula states that V and I are ______________ proportional for any one value of R.

The rate at which charge is forced to move by voltage is called

Whenever there is current through a resistance, it must have a potential difference across its two ends equal to the ______________ product.

A graph referred to as the volt-ampere characteristic of R shows how much resistance exists for different currents.

One of the best safety rules is to

The fact is that high-voltage circuits usually do have small values of current in electronic equipment.

Introduction

Electricity

Resistors

Series Circuits

Parallel Circuits

Series-Parallel Circuits

Voltage Dividers and Current Dividers

Analog and Digital Multimeters

Kirchhoff S Laws

Network Theorems

Conductors and Insulators

Batteries

Magnetism

Electromagnetism

Alternating Voltage and Current

Capacitance

Capacitive Reactance

Capacitive Circuits

Inductance

Inductive Reactance

Inductive Circuits

RC and LR Time Constants

Alternating Current Circuits

Complex Numbers for Ac Circuits

Resonance

Filters

Three-Phase Ac Power Systems

Diodes and Diode Applications

Bipolar Junction Transistors

Transistor Amplifiers

Field Effect Transistors

Power Amplifiers

Thyristors

Operational Amplifiers

Filters