Question 1

Which two targets are valid options when selecting a Remote Site in Prism? (Choose two.)

Accepted Answer

A)  Physical Cluster 
B)  Network attached storage 
C)  XI Cloud Services 
D)  Tape Library 
E)  Cloud 
A)  Physical Cluster 
B)  Network attached storage 
C)  XI Cloud Services 
D)  Tape Library 
E)  Cloud

Question 2

What are two minimum prerequisites for live migration to succeed? (Choose two.)

Accepted Answer

A)  All AHV hosts have IP addresses in the same subnet 
B)  All AHV hosts must be configured on the same VLAN 
C)  All VMs have an IP address in the same subnet 
D)  All VMs are configured for the same VLAN 
A)  All AHV hosts have IP addresses in the same subnet 
B)  All AHV hosts must be configured on the same VLAN 
C)  All VMs have an IP address in the same subnet 
D)  All VMs are configured for the same VLAN

Question 3

When creating a VM on an AHV cluster, how is the initial placement of the VM determined?

Accepted Answer

A)  AHV uses a round robin algorithm, placing new VMs onto hosts based on the numerical order of their UUID 
B)  The administrator right clicks on the desired host and selects Power on VM from the dropdown menu The administrator right clicks on the desired host and selects Power on VM from the dropdown menu 
C)  The Acropolis Dynamic Scheduler selects a host which provides adequate resources for the VMs configuration 
D)  Placement is determined by the host that holds the new_VM token at the time of VM creation 
A)  AHV uses a round robin algorithm, placing new VMs onto hosts based on the numerical order of their UUID 
B)  The administrator right clicks on the desired host and selects Power on VM from the dropdown menu The administrator right clicks on the desired host and selects Power on VM from the dropdown menu 
C)  The Acropolis Dynamic Scheduler selects a host which provides adequate resources for the VMs configuration 
D)  Placement is determined by the host that holds the new_VM token at the time of VM creation

Question 4

Which three drivers are included in the Nutanix virtIO package? (Choose three.)

Accepted Answer

A)  SCSI drivers 
B)  Memory Balloon driver 
C)  USB driver 
D)  Video driver 
E)  NIC Drivers 
A)  SCSI drivers 
B)  Memory Balloon driver 
C)  USB driver 
D)  Video driver 
E)  NIC Drivers

Question 5

An administrator has a cluster in a secure environment. The administrator wants to disable password authentication over SSH to access the cluster. Which configuration should the administrator use to disable password authentication over SSH?

Accepted Answer

A)  Modify the SSH configuration on each host. 
B)  Enable cluster lockdown in Prism. 
C)  Modify the SSH configuration on each CVM. 
D)  Configure a proxy server in Prism. 
A)  Modify the SSH configuration on each host. 
B)  Enable cluster lockdown in Prism. 
C)  Modify the SSH configuration on each CVM. 
D)  Configure a proxy server in Prism.

Question 6

Which options are available when a live migration is performed on a VM in an AOS 5.5 implementation?

Accepted Answer

A)  The VM can be moved on a different host. 
B)  The VM can be moved to a different host and a different storage container. 
C)  The VM can be moved to a different storage container. 
D)  The VM can be moved to a different (remote) site. 
A)  The VM can be moved on a different host. 
B)  The VM can be moved to a different host and a different storage container. 
C)  The VM can be moved to a different storage container. 
D)  The VM can be moved to a different (remote) site.

Question 7

Which feature are only available in Prism Central/Pro and not Prism Element? (Choose two.)

Accepted Answer

A)  Self-service with calm 
B)  Flow 
C)  Analyze dashboard 
D)  Powershell cmdlets downloads 
A)  Self-service with calm 
B)  Flow 
C)  Analyze dashboard 
D)  Powershell cmdlets downloads

Question 8

How should an administrator configure a custom alert for a specific VM in Prism?

Accepted Answer

A)  Modify VM settings to add the custom alert 
B)  Modify node settings to add the custom alert 
C)  Modify an existing alert to only alert on the specific VM 
D)  Modify the alerts to add a new custom alert policy 
A)  Modify VM settings to add the custom alert 
B)  Modify node settings to add the custom alert 
C)  Modify an existing alert to only alert on the specific VM 
D)  Modify the alerts to add a new custom alert policy

Question 9

Refer to the exhibit.   System Non-Root Partition Usage shows a warning or critical alert. The administrator needs to change the frequency of checks and alerts to respond more quickly. Where in Prism Element should the administrator change the frequency of checks and alerts?

Accepted Answer

A)  Health Dashboard -> Manage Checks -> Frequency 
B)  Alert Dashboard -> Manage Checks -> Schedule 
C)  Health Dashboard -> Manage Check ->Schedule 
D)  Alerts Dashboard -> Manage Checks ->Frequency 
A)  Health Dashboard -> Manage Checks -> Frequency 
B)  Alert Dashboard -> Manage Checks -> Schedule 
C)  Health Dashboard -> Manage Check ->Schedule 
D)  Alerts Dashboard -> Manage Checks ->Frequency

Question 10

Command to run NCC health check is:

Accepted Answer

A)  ncc health_checks run_all 
B)  ncc hecks run_all 
C)  ncc 
D)  ncli 
A)  ncc health_checks run_all 
B)  ncc hecks run_all 
C)  ncc 
D)  ncli

Question 11

An administrator receives an alert email that indicates that a health check has failed. Which action should the administrator take to collect more information on the failed check?

Accepted Answer

A)  In the Prism Web Console, select the URL included in the check details 
B)  Re-run the check from the CVM CLI using the ncc command Re-run the check from the CVM CLI using the ncc command 
C)  Forward the alert email to Nutanix Support requesting more information 
D)  Use the ncli command on the CVM to view the details of the check Use the ncli command on the CVM to view the details of the check 
A)  In the Prism Web Console, select the URL included in the check details 
B)  Re-run the check from the CVM CLI using the ncc command Re-run the check from the CVM CLI using the ncc command 
C)  Forward the alert email to Nutanix Support requesting more information 
D)  Use the ncli command on the CVM to view the details of the check Use the ncli command on the CVM to view the details of the check

Question 12

Which two methods are valid for migrating a VM from a Nutanix vSphere cluster to AHV? (Choose two.)

Accepted Answer

A)  Storage vMotion 
B)  Live Migration 
C)  Nutanix Move 
D)  Cross-Hypervisor DR 
A)  Storage vMotion 
B)  Live Migration 
C)  Nutanix Move 
D)  Cross-Hypervisor DR

Question 13

Which change can be made on a cluster with software-based Data-at-Rest Encryption enabled?

Accepted Answer

A)  Disable encryption on the cluster 
B)  Deploy an additional Native KMS Server 
C)  Enable encryption for a VM 
D)  Change Native KMS to External KMS 
A)  Disable encryption on the cluster 
B)  Deploy an additional Native KMS Server 
C)  Enable encryption for a VM 
D)  Change Native KMS to External KMS

Question 14

Which service performs snapshots in an AOS 5.10 implementations?

Accepted Answer

A)  Prism 
B)  Stargate 
C)  Zookeeper 
D)  Medusa 
A)  Prism 
B)  Stargate 
C)  Zookeeper 
D)  Medusa

Question 15

A Nutanix cluster is equipped with four nodes. Four VMs on this cluster have been configured with a VM-VM anti-affinity policy and are each being hosted by a different node. What occurs to the cluster and these VMs during an AHV upgrade?

Accepted Answer

A)  One VM out of the four powers down when the node hosting it reboots 
B)  The AHV pre-upgrade checks fail until the four VMs are powered off 
C)  The AHV pre-upgrade checks fail until the administrator disables the anti-affinity policy 
D)  One node hosts two VMs while the node being upgraded is in maintenance mode 
A)  One VM out of the four powers down when the node hosting it reboots 
B)  The AHV pre-upgrade checks fail until the four VMs are powered off 
C)  The AHV pre-upgrade checks fail until the administrator disables the anti-affinity policy 
D)  One node hosts two VMs while the node being upgraded is in maintenance mode

Question 16

An administrator has observed that when an all-flash AHV host restarts unexpectedly, one VM it hosts does not restart as expected. Which cluster on VM configuration explains this behavior?

Accepted Answer

A)  VM high availability is not enabled. 
B)  Affinity for the VM is set for only the host that rebooted. 
C)  Nutanix Guest Tools are not installed on the VM. 
D)  No other all-flash nodes have capacity to host the VM. 
A)  VM high availability is not enabled. 
B)  Affinity for the VM is set for only the host that rebooted. 
C)  Nutanix Guest Tools are not installed on the VM. 
D)  No other all-flash nodes have capacity to host the VM.

Question 17

Two HDDs fail simultaneously on a single AHV host. What are the chances of data loss?

Accepted Answer

A)  0% 
B)  25% 
C)  50% 
D)  100% 
A)  0% 
B)  25% 
C)  50% 
D)  100%

Question 18

An administrator is auditing the recent alerts on the cluster to report to the management. Which dashboard in Prism Central can be used to generate this report?

Accepted Answer

A)  Alerts 
B)  Explore 
C)  Apps 
D)  Analysis 
A)  Alerts 
B)  Explore 
C)  Apps 
D)  Analysis

Question 19

In Nutanix cluster, which feature ensures VMs can be migrated and restarted on another host in case of failure?

Accepted Answer

A)  High Availability 
B)  Protection Domain 
C)  Host Affinity Rules 
D)  Availability zone 
A)  High Availability 
B)  Protection Domain 
C)  Host Affinity Rules 
D)  Availability zone

Question 20

A node with Erasure coding fails. What is the impact?

Accepted Answer

A)  The node stops utilizing Erasure Coding. 
B)  Potentially increased amount of data stored in the SSD tier 
C)  Increased Controller VM CVM Load 
D)  AOS is unable to do deduplication during the Erasure Coding failure 
A)  The node stops utilizing Erasure Coding. 
B)  Potentially increased amount of data stored in the SSD tier 
C)  Increased Controller VM CVM Load 
D)  AOS is unable to do deduplication during the Erasure Coding failure

Which two targets are valid options when selecting a Remote Site in Prism? (Choose two.)

What are two minimum prerequisites for live migration to succeed? (Choose two.)

When creating a VM on an AHV cluster, how is the initial placement of the VM determined?

Which three drivers are included in the Nutanix virtIO package? (Choose three.)

An administrator has a cluster in a secure environment. The administrator wants to disable password authentication over SSH to access the cluster. Which configuration should the administrator use to disable password authentication over SSH?

Which options are available when a live migration is performed on a VM in an AOS 5.5 implementation?

Which feature are only available in Prism Central/Pro and not Prism Element? (Choose two.)

How should an administrator configure a custom alert for a specific VM in Prism?

Refer to the exhibit. System Non-Root Partition Usage shows a warning or critical alert. The administrator needs to change the frequency of checks and alerts to respond more quickly. Where in Prism Element should the administrator change the frequency of checks and alerts?

Command to run NCC health check is:

An administrator receives an alert email that indicates that a health check has failed. Which action should the administrator take to collect more information on the failed check?

Which two methods are valid for migrating a VM from a Nutanix vSphere cluster to AHV? (Choose two.)

Which change can be made on a cluster with software-based Data-at-Rest Encryption enabled?

Which service performs snapshots in an AOS 5.10 implementations?

A Nutanix cluster is equipped with four nodes. Four VMs on this cluster have been configured with a VM-VM anti-affinity policy and are each being hosted by a different node. What occurs to the cluster and these VMs during an AHV upgrade?

An administrator has observed that when an all-flash AHV host restarts unexpectedly, one VM it hosts does not restart as expected. Which cluster on VM configuration explains this behavior?

Two HDDs fail simultaneously on a single AHV host. What are the chances of data loss?

An administrator is auditing the recent alerts on the cluster to report to the management. Which dashboard in Prism Central can be used to generate this report?

In Nutanix cluster, which feature ensures VMs can be migrated and restarted on another host in case of failure?

A node with Erasure coding fails. What is the impact?

Nutanix Certified Master - Multicloud Infrastructure

Filters

Exam 2: Nutanix Certified Professional 5.10

Which two targets are valid options when selecting a Remote Site in Prism? (Choose two.)

What are two minimum prerequisites for live migration to succeed? (Choose two.)

When creating a VM on an AHV cluster, how is the initial placement of the VM determined?

Which three drivers are included in the Nutanix virtIO package? (Choose three.)

An administrator has a cluster in a secure environment. The administrator wants to disable password authentication over SSH to access the cluster. Which configuration should the administrator use to disable password authentication over SSH?

Which options are available when a live migration is performed on a VM in an AOS 5.5 implementation?

Which feature are only available in Prism Central/Pro and not Prism Element? (Choose two.)

How should an administrator configure a custom alert for a specific VM in Prism?

Refer to the exhibit. System Non-Root Partition Usage shows a warning or critical alert. The administrator needs to change the frequency of checks and alerts to respond more quickly. Where in Prism Element should the administrator change the frequency of checks and alerts?

Command to run NCC health check is:

An administrator receives an alert email that indicates that a health check has failed. Which action should the administrator take to collect more information on the failed check?

Which two methods are valid for migrating a VM from a Nutanix vSphere cluster to AHV? (Choose two.)

Which change can be made on a cluster with software-based Data-at-Rest Encryption enabled?

Which service performs snapshots in an AOS 5.10 implementations?

A Nutanix cluster is equipped with four nodes. Four VMs on this cluster have been configured with a VM-VM anti-affinity policy and are each being hosted by a different node. What occurs to the cluster and these VMs during an AHV upgrade?

An administrator has observed that when an all-flash AHV host restarts unexpectedly, one VM it hosts does not restart as expected. Which cluster on VM configuration explains this behavior?

Two HDDs fail simultaneously on a single AHV host. What are the chances of data loss?

An administrator is auditing the recent alerts on the cluster to report to the management. Which dashboard in Prism Central can be used to generate this report?

In Nutanix cluster, which feature ensures VMs can be migrated and restarted on another host in case of failure?

A node with Erasure coding fails. What is the impact?

Nutanix Certified Master - Multicloud Infrastructure

Filters