Question 1

What user action causes a full sweep to occur?

Accepted Answer

A)  Enable a disabled Consistency Group 
B)  Enable a disabled volume 
C)  Enable a disabled splitter 
D)  Attach a volume to a splitter 
A)  Enable a disabled Consistency Group 
B)  Enable a disabled volume 
C)  Enable a disabled splitter 
D)  Attach a volume to a splitter

Question 2

Which plug-in would facilitate provisioning of VMFS datastores using vSphere Client on an XtremIO array?

Accepted Answer

A)  VSI 
B)  VASA 
C)  VAAI 
D)  VIX API 
A)  VSI 
B)  VASA 
C)  VAAI 
D)  VIX API

Question 3

Which journal action available in Unisphere for RecoverPoint will NOT result in a full sweep synchronization and the loss of all history in the existing journal?

Accepted Answer

A)  Add a journal volume 
B)  Remove a journal volume 
C)  Expand a journal volume 
D)  Reduce a journal volume 
A)  Add a journal volume 
B)  Remove a journal volume 
C)  Expand a journal volume 
D)  Reduce a journal volume

Question 4

After successfully configuring a remote connectivity solution between the customer's XMS and their email server, the customer asks you to validate that the Connect-Home files are being sent successfully to EMC's business systems for processing. Which XMCLI command should you use to complete this task?

Accepted Answer

A)  send-syr-notification test-event 
B)  send-email-notification test-event 
C)  send-smtp-notification test-event 
D)  test-xms-tcp-connectivity 
A)  send-syr-notification test-event 
B)  send-email-notification test-event 
C)  send-smtp-notification test-event 
D)  test-xms-tcp-connectivity

Question 5

You are connecting a host with two Fibre Channel HBAs to an XtremIO array. The array is a dual X-Brick connected to two Fibre Channel switches. An additional requirement is that the host be able to communicate to all Storage Controllers. Which front end ports would meet these requirements?

Accepted Answer

A)  X1-SC1-FC1, X1-SC2-FC2, X2-SC1-FC1, and X2-SC2-FC2 
B)  X1-SC1-FC1, X1-SC2-FC1, X3-SC1-FC1, and X4-SC1-FC1 
C)  X1-SC1-FC1, X1-SC2-FC2, X3-SC1-FC1, and X4-SC2-FC2 
D)  X1-SC1-FC1, X2-SC2-FC1, X2-SC1-FC1, and X2-SC2-FC2 
A)  X1-SC1-FC1, X1-SC2-FC2, X2-SC1-FC1, and X2-SC2-FC2 
B)  X1-SC1-FC1, X1-SC2-FC1, X3-SC1-FC1, and X4-SC1-FC1 
C)  X1-SC1-FC1, X1-SC2-FC2, X3-SC1-FC1, and X4-SC2-FC2 
D)  X1-SC1-FC1, X2-SC2-FC1, X2-SC1-FC1, and X2-SC2-FC2

Question 6

Which command can be used to display a list of predefined alerts on EMC XtremIO using the XMCLI?

Accepted Answer

A)  show-alert-definitions 
B)  show-events 
C)  acknowledge-alert 
D)  show-alerts 
A)  show-alert-definitions 
B)  show-events 
C)  acknowledge-alert 
D)  show-alerts

Question 7

In a VPLEX splitter environment, where is the splitter process running?

Accepted Answer

A)  VPLEX directors 
B)  VPLEX FE ports 
C)  VPLEX BE ports 
D)  VPLEX volumes 
A)  VPLEX directors 
B)  VPLEX FE ports 
C)  VPLEX BE ports 
D)  VPLEX volumes

Question 8

A customer has three VMAX arrays and one VNX array fronted by an EMC VPLEX. They want to use RecoverPoint to protect their environment. How many licenses, of which type, would be required for their environment?

Accepted Answer

A)  1 EX license only 
B)  4 EX licenses 
C)  5 EX licenses 
D)  1 SE license and 1 EX license 
A)  1 EX license only 
B)  4 EX licenses 
C)  5 EX licenses 
D)  1 SE license and 1 EX license

Question 9

Which image access mode provides the quickest way to access data?

Accepted Answer

A)  Virtual Access 
B)  Logged Access 
C)  Direct Access 
D)  Snap Access 
A)  Virtual Access 
B)  Logged Access 
C)  Direct Access 
D)  Snap Access

Question 10

You are adding a VMAX array to a RecoverPoint/CL environment. What needs to be done?

Accepted Answer

A)  Verify there is a zone that includes the RPA ports and the same VMAX front end ports that are zoned to the production host initiator. 
B)  Verify that the 16 new gatekeepers are in the same storage group as the repository and journals. Add the RPA initiator and port groups to the masking view. 
C)  After setting up the masking view use boxmgmt to log in to one of the site leader RPAs and be sure to tag all volumes that RecoverPoint is masked to - including the production and copy volumes. 
D)  Verify that the VMAX is at Enginuity microcode 5876 or higher. After doing the LUN masking, enable Write-Protect ByPass (WPBP). Ensure that the proper license for the VMAX is installed on the RPAs. 
A)  Verify there is a zone that includes the RPA ports and the same VMAX front end ports that are zoned to the production host initiator. 
B)  Verify that the 16 new gatekeepers are in the same storage group as the repository and journals. Add the RPA initiator and port groups to the masking view. 
C)  After setting up the masking view use boxmgmt to log in to one of the site leader RPAs and be sure to tag all volumes that RecoverPoint is masked to - including the production and copy volumes. 
D)  Verify that the VMAX is at Enginuity microcode 5876 or higher. After doing the LUN masking, enable Write-Protect ByPass (WPBP). Ensure that the proper license for the VMAX is installed on the RPAs.

Question 11

A Consistency Group consists of one production copy, one local copy, and two remote copies. How many journals are required for this configuration?

Accepted Answer

A)  Four in total 
B)  Two in total 
C)  One for each remote copy and one for the local copy 
D)  One for the production and one for each remote copy 
A)  Four in total 
B)  Two in total 
C)  One for each remote copy and one for the local copy 
D)  One for the production and one for each remote copy

Question 12

A customer is installing a new RecoverPoint environment. All RPAs have been racked, cabled, and powered on. You have chosen to automatically discover the RPAs using Deployment Manager. After running the discovery, no RPAs are found. What is the most likely cause of this issue?

Accepted Answer

A)  No DHCP server on the network 
B)  Port 443 not open on the network 
C)  RecoverPoint/SE wizard selected 
D)  RPAs not configured into a cluster 
A)  No DHCP server on the network 
B)  Port 443 not open on the network 
C)  RecoverPoint/SE wizard selected 
D)  RPAs not configured into a cluster

Question 13

When logging into an unattached RecoverPoint appliance for the first time, which username and password combination must be used?

Accepted Answer

A)  usernamE. boxmgmt passworD. boxmgmt 
B)  usernamE. admin passworD. Mi@Dim7T 
C)  passworD. admin 
D)  usernamE. service passworD. service 
A)  usernamE. boxmgmt passworD. boxmgmt 
B)  usernamE. admin passworD. Mi@Dim7T 
C)  passworD. admin 
D)  usernamE. service passworD. service

Question 14

After installing two RecoverPoint clusters you find that a Consistency Group cannot be configured with a remote copy. Why?

Accepted Answer

A)  Deployment Manager was not used to connect the clusters. 
B)  The RPAs at the second cluster are not the same type (virtual vs physical). 
C)  The second cluster has not yet been added to the Repository. 
D)  There is no splitter added to the second cluster. 
A)  Deployment Manager was not used to connect the clusters. 
B)  The RPAs at the second cluster are not the same type (virtual vs physical). 
C)  The second cluster has not yet been added to the Repository. 
D)  There is no splitter added to the second cluster.

Question 15

A company with a DR site connected with a 2 Gbps FC link has three RPAs at each site. They are experiencing High Load events, although the FC link is not fully utilized. What would be the best solution to get the FC link utilization up as high as possible while mitigating those events?

Accepted Answer

A)  Use a Distributed Consistency Group 
B)  Add one RPA to the Primary site 
C)  Use the Consistency Group on both RPAs and add two RPAs to the secondary site 
D)  Add one RPA to the DR site 
A)  Use a Distributed Consistency Group 
B)  Add one RPA to the Primary site 
C)  Use the Consistency Group on both RPAs and add two RPAs to the secondary site 
D)  Add one RPA to the DR site

Question 16

Which statement is true regarding vRPAs?

Accepted Answer

A)  vCenter Server is required to deploy vRPAs. 
B)  The proper license must be installed before vRPA deployment. 
C)  vRPAs can be connected to storage through the VNX splitter in the RecoverPoint/SE system. 
D)  vRPAs are installed using Unisphere for RecoverPoint. 
A)  vCenter Server is required to deploy vRPAs. 
B)  The proper license must be installed before vRPA deployment. 
C)  vRPAs can be connected to storage through the VNX splitter in the RecoverPoint/SE system. 
D)  vRPAs are installed using Unisphere for RecoverPoint.

Question 17

What is a characteristic of a full sweep?

Accepted Answer

A)  Initialization is done on all volumes in a Consistency Group. 
B)  Initialization is done on specific volumes in a Consistency Group. 
C)  A full sweep occurs when a user enables a disabled volume. 
D)  A full sweep occurs when a user enables a disabled splitter. 
A)  Initialization is done on all volumes in a Consistency Group. 
B)  Initialization is done on specific volumes in a Consistency Group. 
C)  A full sweep occurs when a user enables a disabled volume. 
D)  A full sweep occurs when a user enables a disabled splitter.

Question 18

Which connectivity protocols are used to interconnect RecoverPoint clusters?

Accepted Answer

A)  FC and IP 
B)  FC and iSCSI 
C)  FC and FCoE 
D)  FCoE and IP 
A)  FC and IP 
B)  FC and iSCSI 
C)  FC and FCoE 
D)  FCoE and IP

Question 19

Under which menu item is basic performance monitoring viewed?

Accepted Answer

A)  Dashboard 
B)  Configuration 
C)  Alerts and Events 
D)  Administration 
A)  Dashboard 
B)  Configuration 
C)  Alerts and Events 
D)  Administration

Question 20

When a copy is in Image Access mode, where is the Image Access Log stored?

Accepted Answer

A)  Journal of the copy 
B)  Journal of the source 
C)  In memory of the RPA 
D)  On the copy volume 
A)  Journal of the copy 
B)  Journal of the source 
C)  In memory of the RPA 
D)  On the copy volume

What user action causes a full sweep to occur?

Which plug-in would facilitate provisioning of VMFS datastores using vSphere Client on an XtremIO array?

Which journal action available in Unisphere for RecoverPoint will NOT result in a full sweep synchronization and the loss of all history in the existing journal?

You are connecting a host with two Fibre Channel HBAs to an XtremIO array. The array is a dual X-Brick connected to two Fibre Channel switches. An additional requirement is that the host be able to communicate to all Storage Controllers. Which front end ports would meet these requirements?

Which command can be used to display a list of predefined alerts on EMC XtremIO using the XMCLI?

In a VPLEX splitter environment, where is the splitter process running?

A customer has three VMAX arrays and one VNX array fronted by an EMC VPLEX. They want to use RecoverPoint to protect their environment. How many licenses, of which type, would be required for their environment?

Which image access mode provides the quickest way to access data?

You are adding a VMAX array to a RecoverPoint/CL environment. What needs to be done?

A Consistency Group consists of one production copy, one local copy, and two remote copies. How many journals are required for this configuration?

A customer is installing a new RecoverPoint environment. All RPAs have been racked, cabled, and powered on. You have chosen to automatically discover the RPAs using Deployment Manager. After running the discovery, no RPAs are found. What is the most likely cause of this issue?

When logging into an unattached RecoverPoint appliance for the first time, which username and password combination must be used?

After installing two RecoverPoint clusters you find that a Consistency Group cannot be configured with a remote copy. Why?

A company with a DR site connected with a 2 Gbps FC link has three RPAs at each site. They are experiencing High Load events, although the FC link is not fully utilized. What would be the best solution to get the FC link utilization up as high as possible while mitigating those events?

Which statement is true regarding vRPAs?

What is a characteristic of a full sweep?

Which connectivity protocols are used to interconnect RecoverPoint clusters?

Under which menu item is basic performance monitoring viewed?

When a copy is in Image Access mode, where is the Image Access Log stored?

VPLEX Specialist for Implementation Engineers

RecoverPoint Specialist for Implementation Engineers

Unity Solutions Specialist Exam for Implementation Engineers

XtremIO Solutions and Design Specialist Exam for Technology Architects

Isilon Solutions and Design Specialist for Technology Architects

VPLEX Specialist Exam for Storage Administrators

RecoverPoint Specialist for Storage Administrators

Backup and Recovery - Avamar Specialist for Implementation Engineers

Backup Recovery - Avamar Specialist for Storage Administrators

ScaleIO 1.x Server-Based SAN

Filters

Exam 2: XtremIO Solutions Specialist Exam for Implementation Engineers

What user action causes a full sweep to occur?

Which plug-in would facilitate provisioning of VMFS datastores using vSphere Client on an XtremIO array?

Which journal action available in Unisphere for RecoverPoint will NOT result in a full sweep synchronization and the loss of all history in the existing journal?

You are connecting a host with two Fibre Channel HBAs to an XtremIO array. The array is a dual X-Brick connected to two Fibre Channel switches. An additional requirement is that the host be able to communicate to all Storage Controllers. Which front end ports would meet these requirements?

Which command can be used to display a list of predefined alerts on EMC XtremIO using the XMCLI?

In a VPLEX splitter environment, where is the splitter process running?

A customer has three VMAX arrays and one VNX array fronted by an EMC VPLEX. They want to use RecoverPoint to protect their environment. How many licenses, of which type, would be required for their environment?

Which image access mode provides the quickest way to access data?

You are adding a VMAX array to a RecoverPoint/CL environment. What needs to be done?

A Consistency Group consists of one production copy, one local copy, and two remote copies. How many journals are required for this configuration?

A customer is installing a new RecoverPoint environment. All RPAs have been racked, cabled, and powered on. You have chosen to automatically discover the RPAs using Deployment Manager. After running the discovery, no RPAs are found. What is the most likely cause of this issue?

When logging into an unattached RecoverPoint appliance for the first time, which username and password combination must be used?

After installing two RecoverPoint clusters you find that a Consistency Group cannot be configured with a remote copy. Why?

A company with a DR site connected with a 2 Gbps FC link has three RPAs at each site. They are experiencing High Load events, although the FC link is not fully utilized. What would be the best solution to get the FC link utilization up as high as possible while mitigating those events?

Which statement is true regarding vRPAs?

What is a characteristic of a full sweep?

Which connectivity protocols are used to interconnect RecoverPoint clusters?

Under which menu item is basic performance monitoring viewed?

When a copy is in Image Access mode, where is the Image Access Log stored?

VPLEX Specialist for Implementation Engineers

RecoverPoint Specialist for Implementation Engineers

Unity Solutions Specialist Exam for Implementation Engineers

XtremIO Solutions and Design Specialist Exam for Technology Architects

Isilon Solutions and Design Specialist for Technology Architects

VPLEX Specialist Exam for Storage Administrators

RecoverPoint Specialist for Storage Administrators

Backup and Recovery - Avamar Specialist for Implementation Engineers

Backup Recovery - Avamar Specialist for Storage Administrators

ScaleIO 1.x Server-Based SAN

Filters