Question 1

Refer to the exhibit.   What does the IP address 10.1.1.1 represent?

Accepted Answer

A)  The IP address of the EMC storage 
B)  The SMLT IP address of the two VSP 7200 switches 
C)  The Virtual IST IP address of the two VSP 7200 switches 
D)  The VRRP IP address of the two VSP 7200 switches 
A)  The IP address of the EMC storage 
B)  The SMLT IP address of the two VSP 7200 switches 
C)  The Virtual IST IP address of the two VSP 7200 switches 
D)  The VRRP IP address of the two VSP 7200 switches

Question 2

An ACP 4200 engineering team is considering deploying an Extension Rack. What is the purpose of the Extension Rack?

Accepted Answer

A)  When the Main rack is not functioning properly the Extension Rack will take over for the main. 
B)  When all hardware components cannot fit into the Main ACP Rack, Extension Racks are used for additional physical appliances and servers. 
C)  When full redundancy is needed, Extension Racks are used for additional physical appliances and servers. 
D)  When the number of telephone extensions on the Avaya Aura applications exceed the recommended limit, Extension Racks are used to host additional media resources to support a higher limit. 
A)  When the Main rack is not functioning properly the Extension Rack will take over for the main. 
B)  When all hardware components cannot fit into the Main ACP Rack, Extension Racks are used for additional physical appliances and servers. 
C)  When full redundancy is needed, Extension Racks are used for additional physical appliances and servers. 
D)  When the number of telephone extensions on the Avaya Aura applications exceed the recommended limit, Extension Racks are used to host additional media resources to support a higher limit.

Question 3

Which application can a technician use to remotely connect to the Management Server Console on an ACP 4200?

Accepted Answer

A)  VNC 
B)  Remote Desktop Connection 
C)  PuTTY 
D)  Team Viewer 
A)  VNC 
B)  Remote Desktop Connection 
C)  PuTTY 
D)  Team Viewer

Question 4

When a Layer 2-only networking topology is deployed, what is the behavior of the ACP 4200?

Accepted Answer

A)  It will support only a single management VLAN. 
B)  It will extend VLANs out to the Data Center routers which will provide Layer 3 routing. 
C)  It will support only a single application VLAN. 
D)  It will have 802.1Q tagging enabled on all ports of the VSP switches. 
A)  It will support only a single management VLAN. 
B)  It will extend VLANs out to the Data Center routers which will provide Layer 3 routing. 
C)  It will support only a single application VLAN. 
D)  It will have 802.1Q tagging enabled on all ports of the VSP switches.

Question 5

Which statement about the Nimble Storage used in ACP 4200 4.0 is true?

Accepted Answer

A)  It is connected directly to the ESXi hosts via multiple 10G links. 
B)  It is connected directly to the ESXi hosts via multiple 1G links. 
C)  It is connected to the network switches via multiple 10G links. 
D)  It is connected to the network switches via multiple 40G links. 
A)  It is connected directly to the ESXi hosts via multiple 10G links. 
B)  It is connected directly to the ESXi hosts via multiple 1G links. 
C)  It is connected to the network switches via multiple 10G links. 
D)  It is connected to the network switches via multiple 40G links.

Question 6

Refer to the exhibit.   Why is the usage measurement of CPU2 (in Purple) shown in the chart highlighted in the table?

Accepted Answer

A)  Because the CPU2 has been nominated as the primary CPU in this Virtual Machine. 
B)  Because the CPU2 has been highlighted with an active alarm. 
C)  Because the CPU2 usage is closest to the average usage of all the CPUs. 
D)  Because the CPU2 has been selected in the table under the chart. 
A)  Because the CPU2 has been nominated as the primary CPU in this Virtual Machine. 
B)  Because the CPU2 has been highlighted with an active alarm. 
C)  Because the CPU2 usage is closest to the average usage of all the CPUs. 
D)  Because the CPU2 has been selected in the table under the chart.

Question 7

Avaya Orchestrator monitors the ACP 4200 components by organizing them into which two groups? (Choose two.)

Accepted Answer

A)  Power 
B)  Virtual Machines 
C)  Storage 
D)  Applications 
A)  Power 
B)  Virtual Machines 
C)  Storage 
D)  Applications

Question 8

Which Extreme Networks switch model is used in a new ACP 4200 release 4.0?

Accepted Answer

A)  VSP 4850 
B)  VSP 7254 
C)  VSP 8400 
D)  VSP 7024 
A)  VSP 4850 
B)  VSP 7254 
C)  VSP 8400 
D)  VSP 7024

Question 9

Which two circumstances would require the Avaya Orchestrator ACP Configuration Wizard to be run in the field? (Choose two.)

Accepted Answer

A)  When a new G450 Gateway is added to the ACP. 
B)  When a new configuration file for the ACP's VSP Switches is deployed. 
C)  When a new Virtual Machine is added to the ACP. 
D)  When a new ESXi Host is added to the ACP. 
A)  When a new G450 Gateway is added to the ACP. 
B)  When a new configuration file for the ACP's VSP Switches is deployed. 
C)  When a new Virtual Machine is added to the ACP. 
D)  When a new ESXi Host is added to the ACP.

Question 10

An administrator is adding new equipment to the ACP 4200 in the Avaya Orchestrator Configuration Wizard. How do the IP Address and Protocols fields get populated?

Accepted Answer

A)  These are optional fields that do not need to be populated. 
B)  These are automatically detected by clicking on the Detect Hardware button. 
C)  These are manually entered by the administrator. 
D)  These are imported from the ACP Configurator Tool Excel spreadsheet. 
A)  These are optional fields that do not need to be populated. 
B)  These are automatically detected by clicking on the Detect Hardware button. 
C)  These are manually entered by the administrator. 
D)  These are imported from the ACP Configurator Tool Excel spreadsheet.

Question 11

Which two statements about the HP Nimble storage systems used in ACP 4200 are true? (Choose two.)

Accepted Answer

A)  ACP 4200 may use the HP Nimble 33 Base unit with up to 2 Expansion units. 
B)  ACP 4200 may use the HP Nimble 16 Base unit with up to 5 Expansion units. 
C)  ACP 4200 may use the HP Nimble 16 Base unit with up to 2 Expansion units. 
D)  ACP 4200 may use the HP Nimble 33 Base unit with up to 5 Expansion units. 
A)  ACP 4200 may use the HP Nimble 33 Base unit with up to 2 Expansion units. 
B)  ACP 4200 may use the HP Nimble 16 Base unit with up to 5 Expansion units. 
C)  ACP 4200 may use the HP Nimble 16 Base unit with up to 2 Expansion units. 
D)  ACP 4200 may use the HP Nimble 33 Base unit with up to 5 Expansion units.

Question 12

An engineering implementation team has been asked to install an ACP 4200. Which task related to the Avaya Orchestrator is completed during the installation by the implementation team?

Accepted Answer

A)  Deploy the Rack and Device Dashboards. 
B)  Install Avaya Orchestrator. 
C)  Run the ACP Configuration Wizard. 
D)  Power on the Avaya Orchestrator virtual machine. 
A)  Deploy the Rack and Device Dashboards. 
B)  Install Avaya Orchestrator. 
C)  Run the ACP Configuration Wizard. 
D)  Power on the Avaya Orchestrator virtual machine.

Question 13

What is the purpose of the VMware Distributed Resource Scheduler (DRS) as used in ACP 4200?

Accepted Answer

A)  It enables a utility that balances computing workloads with available resources in a virtualized environment. 
B)  It enables an operational virtual machine to migrate from one ESXi host to another, which includes its running state and storage. 
C)  It provides monitoring of operating system and hardware failures, and also restarts virtual machines on other hosts within the resource pool. 
D)  It creates a pool of virtual disk space that can be shared by multiple virtual machines. 
A)  It enables a utility that balances computing workloads with available resources in a virtualized environment. 
B)  It enables an operational virtual machine to migrate from one ESXi host to another, which includes its running state and storage. 
C)  It provides monitoring of operating system and hardware failures, and also restarts virtual machines on other hosts within the resource pool. 
D)  It creates a pool of virtual disk space that can be shared by multiple virtual machines.

Question 14

Refer to the exhibit.   Which Avaya Session Border Controller for Enterprise (ASBCE) configuration option is shown?

Accepted Answer

A)  High Availability 
B)  Hybrid 
C)  Geographic Redundancy 
D)  Two-wire 
A)  High Availability 
B)  Hybrid 
C)  Geographic Redundancy 
D)  Two-wire

Question 15

Which three tasks must be performed by the ACP 4200 implementation team at the customer site? (Choose three.)

Accepted Answer

A)  Connect the network switches to the customer network. 
B)  Assign IP addresses to the existing Virtual Machines. 
C)  Connect to the VMware vCenter Server Appliance and power up the virtual machines. 
D)  Fill up the IP template. 
E)  Install a ground connection for each enclosure. 
A)  Connect the network switches to the customer network. 
B)  Assign IP addresses to the existing Virtual Machines. 
C)  Connect to the VMware vCenter Server Appliance and power up the virtual machines. 
D)  Fill up the IP template. 
E)  Install a ground connection for each enclosure.

Question 16

What are two examples of Avaya Orchestrator Services? (Choose two.)

Accepted Answer

A)  Link Status 
B)  CPU Utilization 
C)  Virtual Machine Uptime 
D)  PDUs 
A)  Link Status 
B)  CPU Utilization 
C)  Virtual Machine Uptime 
D)  PDUs

Question 17

What is the purpose of VMware vMotion as used in ACP 4200?

Accepted Answer

A)  It enables an operational virtual machine to migrate from one ESXi host to another, which includes its running state and storage. 
B)  It dynamically allocated and balances computing capacity across the logical resource pools. 
C)  It provides monitoring of operating system and hardware failures, and also restarts virtual machines on other hosts within the resource pool. 
D)  It creates a pool of virtual disk space that can be shared by multiple virtual machines. 
A)  It enables an operational virtual machine to migrate from one ESXi host to another, which includes its running state and storage. 
B)  It dynamically allocated and balances computing capacity across the logical resource pools. 
C)  It provides monitoring of operating system and hardware failures, and also restarts virtual machines on other hosts within the resource pool. 
D)  It creates a pool of virtual disk space that can be shared by multiple virtual machines.

Question 18

Using VMware networking in ACP 4200, how are Virtual NICs mapped to physical NICs?

Accepted Answer

A)  Via DRS rules 
B)  On a 1-to-1 basis 
C)  Via Virtual Switches and Port Groups 
D)  Via the VNIIC mapping tables 
A)  Via DRS rules 
B)  On a 1-to-1 basis 
C)  Via Virtual Switches and Port Groups 
D)  Via the VNIIC mapping tables

Question 19

An installation engineer is installing the power connections to the ACP 4200. What must the installation engineer be aware of?

Accepted Answer

A)  Before connecting the power, the power switches of all components in the rack must be in the OFF position. 
B)  Power cables must only access the rack from the top of the rack. 
C)  Power connections must be within 10 feet (3 meters) of the rack. 
D)  Power cables must only access the rack from the bottom of the rack. 
A)  Before connecting the power, the power switches of all components in the rack must be in the OFF position. 
B)  Power cables must only access the rack from the top of the rack. 
C)  Power connections must be within 10 feet (3 meters) of the rack. 
D)  Power cables must only access the rack from the bottom of the rack.

Question 20

Refer to the exhibit.   An administrator navigates to the Avaya Orchestrator link shown in the exhibit. What would the Administrator be able to monitor here?

Accepted Answer

A)  A list of Services with status of Warning or Critical. 
B)  A list of Services with status of OK. 
C)  A list of Services regardless of status. 
D)  A list of Services which have additional details. 
A)  A list of Services with status of Warning or Critical. 
B)  A list of Services with status of OK. 
C)  A list of Services regardless of status. 
D)  A list of Services which have additional details.

Refer to the exhibit. What does the IP address 10.1.1.1 represent?

An ACP 4200 engineering team is considering deploying an Extension Rack. What is the purpose of the Extension Rack?

Which application can a technician use to remotely connect to the Management Server Console on an ACP 4200?

When a Layer 2-only networking topology is deployed, what is the behavior of the ACP 4200?

Which statement about the Nimble Storage used in ACP 4200 4.0 is true?

Refer to the exhibit. Why is the usage measurement of CPU2 (in Purple) shown in the chart highlighted in the table?

Avaya Orchestrator monitors the ACP 4200 components by organizing them into which two groups? (Choose two.)

Which Extreme Networks switch model is used in a new ACP 4200 release 4.0?

Which two circumstances would require the Avaya Orchestrator ACP Configuration Wizard to be run in the field? (Choose two.)

An administrator is adding new equipment to the ACP 4200 in the Avaya Orchestrator Configuration Wizard. How do the IP Address and Protocols fields get populated?

Which two statements about the HP Nimble storage systems used in ACP 4200 are true? (Choose two.)

An engineering implementation team has been asked to install an ACP 4200. Which task related to the Avaya Orchestrator is completed during the installation by the implementation team?

What is the purpose of the VMware Distributed Resource Scheduler (DRS) as used in ACP 4200?

Refer to the exhibit. Which Avaya Session Border Controller for Enterprise (ASBCE) configuration option is shown?

Which three tasks must be performed by the ACP 4200 implementation team at the customer site? (Choose three.)

What are two examples of Avaya Orchestrator Services? (Choose two.)

What is the purpose of VMware vMotion as used in ACP 4200?

Using VMware networking in ACP 4200, how are Virtual NICs mapped to physical NICs?

An installation engineer is installing the power connections to the ACP 4200. What must the installation engineer be aware of?

Refer to the exhibit. An administrator navigates to the Avaya Orchestrator link shown in the exhibit. What would the Administrator be able to monitor here?

Avaya Aura Contact Center Administration

Avaya Aura Contact Center Implementation Exam

Avaya Aura Contact Center Multimedia Implementation Exam

Avaya Aura Core Components Integration

Avaya Equinox Solution with Avaya Aura Collaboration Applications Integration

Avaya Aura Core Components Support Exam

Avaya Equino Solution with Avaya Aura Collaboration Applications Support Exam

Avaya Aura Call Center Elite Support

Avaya Converged Platform Integration

Avaya Converged Platform Support

Avaya IP Office Platform Basic Integration and Configuration

Avaya IP Office Platform Configuration and Maintenance Exam

Filters

Exam 8: Avaya Aura Call Center Elite Implementation Exam

Refer to the exhibit. What does the IP address 10.1.1.1 represent?

An ACP 4200 engineering team is considering deploying an Extension Rack. What is the purpose of the Extension Rack?

Which application can a technician use to remotely connect to the Management Server Console on an ACP 4200?

When a Layer 2-only networking topology is deployed, what is the behavior of the ACP 4200?

Which statement about the Nimble Storage used in ACP 4200 4.0 is true?

Refer to the exhibit. Why is the usage measurement of CPU2 (in Purple) shown in the chart highlighted in the table?

Avaya Orchestrator monitors the ACP 4200 components by organizing them into which two groups? (Choose two.)

Which Extreme Networks switch model is used in a new ACP 4200 release 4.0?

Which two circumstances would require the Avaya Orchestrator ACP Configuration Wizard to be run in the field? (Choose two.)

An administrator is adding new equipment to the ACP 4200 in the Avaya Orchestrator Configuration Wizard. How do the IP Address and Protocols fields get populated?

Which two statements about the HP Nimble storage systems used in ACP 4200 are true? (Choose two.)

An engineering implementation team has been asked to install an ACP 4200. Which task related to the Avaya Orchestrator is completed during the installation by the implementation team?

What is the purpose of the VMware Distributed Resource Scheduler (DRS) as used in ACP 4200?

Refer to the exhibit. Which Avaya Session Border Controller for Enterprise (ASBCE) configuration option is shown?

Which three tasks must be performed by the ACP 4200 implementation team at the customer site? (Choose three.)

What are two examples of Avaya Orchestrator Services? (Choose two.)

What is the purpose of VMware vMotion as used in ACP 4200?

Using VMware networking in ACP 4200, how are Virtual NICs mapped to physical NICs?

An installation engineer is installing the power connections to the ACP 4200. What must the installation engineer be aware of?

Refer to the exhibit. An administrator navigates to the Avaya Orchestrator link shown in the exhibit. What would the Administrator be able to monitor here?

Avaya Aura Contact Center Administration

Avaya Aura Contact Center Implementation Exam

Avaya Aura Contact Center Multimedia Implementation Exam

Avaya Aura Core Components Integration

Avaya Equinox Solution with Avaya Aura Collaboration Applications Integration

Avaya Aura Core Components Support Exam

Avaya Equino Solution with Avaya Aura Collaboration Applications Support Exam

Avaya Aura Call Center Elite Support

Avaya Converged Platform Integration

Avaya Converged Platform Support

Avaya IP Office Platform Basic Integration and Configuration

Avaya IP Office Platform Configuration and Maintenance Exam

Filters