Exam 30: Veneering

Veneer should be stored rolled.

A(n) ____ may occur if a speck of dirt or sawdust ends up between the veneer and the substrate.

A veneer ____ contains sharp blades that slice the veneer off flush with the surface of the substrate.

The knife used for cutting veneer should have a very sharp point and be ground on both sides.

The oldest method of laying veneer employs ____.

____ is essentially a border, and it has the effect of highlighting the center section.

Most commonly, ____ veneer is used for application to 3/4-inch panels.

____ is the process attaching a thin layer of wood to some type of solid substrate.

A ____-inch metal rule is good for small work, and a framing square can be used for longer cuts.

Veneer tape with hot-melt adhesive on its back must be activated by pressure.