Question 1

The Occupational Safety and Health Act requires __________ to provide a safe and healthful workplace free of recognized hazards and to follow OSHA standards.

Accepted Answer

A)  employers 
B)  the Bureau of Workers' Compensation 
C)  the Department of Labor 
D)  All of the above 
A)  employers 
B)  the Bureau of Workers' Compensation 
C)  the Department of Labor 
D)  All of the above A

Question 2

Fires that involve ordinary materials such as paper, cardboard, and wood are classified as Class __________ fires.

Accepted Answer

A)  A 
B)  B 
C)  C 
D)  D 
A)  A 
B)  B 
C)  C 
D)  D A

Question 3

A __________ is a protective device that opens the electrical circuit when an imbalance in the amount of current flow between the conductors is sensed.

Accepted Answer

ground fault circuit interrupter

Question 4

A general statement to keep in mind is that __________ amperes is often enough to kill a person.

Accepted Answer

A)  3.0 
B)  0.3 
C)  0.03 
D)  0.003 
A)  3.0 
B)  0.3 
C)  0.03 
D)  0.003

Question 5

The three things that must be present for a fire to burn are __________.

Accepted Answer

A)  heat, fuel, and chemical reaction 
B)  heat, fuel, and oxygen 
C)  fuel, oxygen, and chemical reaction 
D)  oxygen, fuel, and pressure 
A)  heat, fuel, and chemical reaction 
B)  heat, fuel, and oxygen 
C)  fuel, oxygen, and chemical reaction 
D)  oxygen, fuel, and pressure

Question 6

On construction sites, safety harnesses are required to be worn when you work in an area where you can fall __________ feet or more.

Accepted Answer

A)  4 
B)  6 
C)  8 
D)  10 
A)  4 
B)  6 
C)  8 
D)  10

Question 7

OSHA defines a __________ as an excavation that is deeper than it is wide and less than 15 feet wide at the bottom.

Accepted Answer

The answer of OSHA defines a __________ as an excavation...

Question 8

Which of the following is NOT an employee responsibility according to OSHA?

Accepted Answer

A)  reading the OSHA poster every employer is required to display 
B)  following employer safety rules and use all required safety gear and equipment 
C)  following safe work practices as directed by the employer 
D)  reporting immediately all hazardous conditions to OSHA 
A)  reading the OSHA poster every employer is required to display 
B)  following employer safety rules and use all required safety gear and equipment 
C)  following safe work practices as directed by the employer 
D)  reporting immediately all hazardous conditions to OSHA

Question 9

Explain why Safety Data Sheets (SDS) are required on every job site.

Accepted Answer

SDS give complete information

Question 10

Those who carry heavy loads or do a lot of stooping and bending in their daily work can avoid painful injuries and common backaches by wearing a __________.

Accepted Answer

The answer of Those who carry heavy loads or do...

Question 11

Explain the proper method for lifting heavy objects.

Accepted Answer

Always lift heavy objects with

Question 12

Explain why horseplay is not appropriate on the job site.

Accepted Answer

Horseplay causes peo

Question 13

The unit of measurement used to represent the electrical pressure which causes current to flow is called __________.

Accepted Answer

A)  amperage 
B)  watts 
C)  voltage 
D)  ohms 
A)  amperage 
B)  watts 
C)  voltage 
D)  ohms

Question 14

Approved safety glasses are stamped with __________.

Accepted Answer

A)  Z81.7 
B)  Z87 
C)  Z87.1 
D)  Z87.7 
A)  Z81.7 
B)  Z87 
C)  Z87.1 
D)  Z87.7

Question 15

Explain what OSHA is and its purpose.

Accepted Answer

OSHA stands for Occupational S

Question 16

GFCI's are designed to trip when they sense a current imbalance of __________ amperes or more.

Accepted Answer

A)  0.003 
B)  0.006 
C)  0.03 
D)  0.06 
A)  0.003 
B)  0.006 
C)  0.03 
D)  0.06

Question 17

Explain why it is important to read the labels and user instructions before using a product on the job site.

Accepted Answer

Labels tell user wha

Question 18

The unit of measurement for electrical current is __________.

Accepted Answer

A)  volts 
B)  watts 
C)  ohms 
D)  amperes 
A)  volts 
B)  watts 
C)  ohms 
D)  amperes

Question 19

Gloves that are made for warmth __________ provide the level of protection that may be needed by the worker who is handling sharp-edged building materials.

Accepted Answer

A)  do 
B)  do not 
A)  do 
B)  do not

Question 20

Your back__________ designed to carry a heavy load in a bent-over position.

Accepted Answer

A)  is 
B)  is not 
A)  is 
B)  is not

Exam 4: Jobsite Safety

The Occupational Safety and Health Act requires __________ to provide a safe and healthful workplace free of recognized hazards and to follow OSHA standards.

Fires that involve ordinary materials such as paper, cardboard, and wood are classified as Class __________ fires.

A __________ is a protective device that opens the electrical circuit when an imbalance in the amount of current flow between the conductors is sensed.

A general statement to keep in mind is that __________ amperes is often enough to kill a person.

The three things that must be present for a fire to burn are __________.

On construction sites, safety harnesses are required to be worn when you work in an area where you can fall __________ feet or more.

OSHA defines a __________ as an excavation that is deeper than it is wide and less than 15 feet wide at the bottom.

Which of the following is NOT an employee responsibility according to OSHA?

Explain why Safety Data Sheets (SDS) are required on every job site.

Those who carry heavy loads or do a lot of stooping and bending in their daily work can avoid painful injuries and common backaches by wearing a __________.

Explain the proper method for lifting heavy objects.

Explain why horseplay is not appropriate on the job site.

The unit of measurement used to represent the electrical pressure which causes current to flow is called __________.

Approved safety glasses are stamped with __________.

Explain what OSHA is and its purpose.

GFCI's are designed to trip when they sense a current imbalance of __________ amperes or more.

Explain why it is important to read the labels and user instructions before using a product on the job site.

The unit of measurement for electrical current is __________.

Gloves that are made for warmth __________ provide the level of protection that may be needed by the worker who is handling sharp-edged building materials.

Your back__________ designed to carry a heavy load in a bent-over position.

Organization of the Industry

Working in the Industry

Green Construction

Safety With Ladders, Scaffolds, and Machines

Whole Numbers

Decimals

Fractions

Linear Measure

Percent Percentage

Area and Volume

Right Angles

Combined Operations

Hand Tools-Selection, Use and Care

Power Tools-Selection, Use, and Care

Fasteners

Rigging

Views

Scales

Alphabet of Lines

Use of Symbols

Plan Views

Elevations

Sections and Details

Filters