Exam 20: Seam Welds

The flush-contour symbol and postweld finish are applied to the seam-weld symbol when it is centered astride the reference line as a weld between members is indicated.

Size of the seam-weld expressed in ____ when the drawing is metric.

The seam-weld symbol may only have an arrow side significance.

Because of the nature of the seam weld, the symbol is not used with a both sides significance.

The ____ symbol may be applied to the seam-weld symbol to indicate the member to be made flush.

Strength of the seam-weld is in terms of the shear strength of the weld in ____ per linear inch.

Dimensions are applied on the same side of the reference line as the ____ symbol.

When the center-to-center spacing (pitch) dimension for intermittent seam welds is to be shown, it is placed to the ____ of the length dimension.

When an intermittent seam weld is made parallel to the joint or axis of the weld, a detailed drawing must be used and reference made to it in the tail of the arrow.

Strength of the seam-weld is in terms of the shear strength of the weld in ____________________ per millimeter.

A ____ weld is a continuous weld made on or between overlapping members of a joint.

When a dimension is expressed in Newtons, the letter "____________________" is added to the value.

When the seam weld symbol is located ____ the reference line, the dimensions can be placed on either side of the reference line.

A welding symbol specifying the length and pitch of a seam weld without reference to a detail drawing signifies the length and pitch are measured ____________________ to the axis of the joint to be welded.

The dimension for the length or extent of a seam weld is placed to the ____ of the symbol.

When the symbol is shown astride the reference line, it indicates the weld is located ____ the members.

A tail must be used with the seam weld symbol to indicate the ____________________ reference.

When an arrow side or other side significance is not intended, the seam-weld symbol is located ____ the reference line.

A(n) ____________________ weld is a continuous weld that may consist of a single weld or a series of overlapping spot welds.

For multiple-joint seam welds, where one or more pieces are inserted between the two outer members, the same symbol and elements are applied to specify the weld as are used for the two-member joints, regardless of the number of pieces inserted.