Question 1

What is the metric equivalent of the English system measurement, foot-pounds, used for torque readings?

Accepted Answer

Torque readings are expressed in foot-pounds in the English system. The metric equivalent is expressed in newtons.

Question 2

On a metric ruler, hundredths are called millimeters.

Accepted Answer

A) True 
 B)False  False

Question 3

A vernier caliper can measure:

Accepted Answer

A) Inside diameter 
B) Outside diameter 
C) Depth 
D) All of the above 
A) Inside diameter 
B) Outside diameter 
C) Depth 
D) All of the above D

Question 4

Technician A says the threads on the micrometer spindle have 40 threads per inch. Technician B says one complete turn of the micrometer thimble moves the spindle 0.025 inch. Who is correct?

Accepted Answer

A) Technician A 
B) Technician B 
C) Both technicians 
D) Neither technician 
A) Technician A 
B) Technician B 
C) Both technicians 
D) Neither technician

Question 5

Name two common measurements in automotive repair that are made with feeler gauges.

Accepted Answer

Feeler gauges are commonly use

Question 6

Metric micrometers are being discussed. Technician A says the hub is graduated in millimeters and half millimeters. Technician B says each revolution of the thimble equals one millimeter on the hub. Which technician is right?

Accepted Answer

A) Technician A 
B) Technician B 
C) Both technicians 
D) Neither technician 
A) Technician A 
B) Technician B 
C) Both technicians 
D) Neither technician

Question 7

If a micrometer spindle must be moved a long way to adjust it, roll the ____ on your arm or hand.

Accepted Answer

A) ratchet 
B) barrel 
C) sleeve 
D) thimble 
A) ratchet 
B) barrel 
C) sleeve 
D) thimble

Question 8

The metric measurement of volume is the liter.

Accepted Answer

A) True 
 B)False

Question 9

One liter equals:

Accepted Answer

A) 1000 cubic centimeters 
B) 1 quart 
C) 1 gallon 
D) None of the above 
A) 1000 cubic centimeters 
B) 1 quart 
C) 1 gallon 
D) None of the above

Question 10

The metric measuring system is based on:

Accepted Answer

A) The gold standard 
B) The number 10 
C) Fractions of 1⁄64" 
D) The distance between the earth and the moon 
A) The gold standard 
B) The number 10 
C) Fractions of 1⁄64" 
D) The distance between the earth and the moon

Question 11

Technician A says that a gauge block is used to measure valve lash (clearance). Technician B says that the vernier scale on a micrometer measures to 0.001". Who is right?

Accepted Answer

A) Technician A 
B) Technician B 
C) Both A and B 
D) Neither A nor B 
A) Technician A 
B) Technician B 
C) Both A and B 
D) Neither A nor B

Question 12

Name the tool used to calibrate a micrometer.

Accepted Answer

The answer of Name the tool used to calibrate a...

Question 13

Approximately how many cubic inches are there in 1 liter?

Accepted Answer

The answer of Approximately how many cubic inches are there...

Question 14

A gauge standard is used to calibrate a micrometer.

Accepted Answer

A) True 
 B)False

Question 15

Technician A says that one revolution of the micrometer thimble equals 1⁄40 inch. Technician B says that one revolution of the micrometer thimble equals 0.025 inch. Who is right?

Accepted Answer

A) Technician A 
B) Technician B 
C) Both A and B 
D) Neither A nor B 
A) Technician A 
B) Technician B 
C) Both A and B 
D) Neither A nor B

Question 16

A digital caliper with an LCD measures either English or metric units to an accuracy of 0.0005.

Accepted Answer

A) True 
 B)False

Question 17

Technician A says micrometers are used primarily to measure inside diameters. Technician B says telescoping gauges are used with micrometers to measure cylinders and bearing bores. Who is right?

Accepted Answer

A) Technician A 
B) Technician B 
C) Both technicians 
D) Neither technician 
A) Technician A 
B) Technician B 
C) Both technicians 
D) Neither technician

Question 18

Which scale on the micrometer is used to measure to 0.0001"?

Accepted Answer

The answer of Which scale on the micrometer is used...

Question 19

Technician A says one advantage of micrometers is they are clear and easy to read. Technician B says micrometers are consistent and accurate. Which technician is right?

Accepted Answer

A) Technician A 
B) Technician B 
C) Both technicians 
D) Neither technician 
A) Technician A 
B) Technician B 
C) Both technicians 
D) Neither technician

Question 20

Technician A says a vernier caliper can measure inside diameter and outside diameter. Technician B says measurements in auto industry are commonly made in hundredths of an inch. Who is right?

Accepted Answer

A) Technician A 
B) Technician B 
C) Both technicians 
D) Neither technician 
A) Technician A 
B) Technician B 
C) Both technicians 
D) Neither technician

What is the metric equivalent of the English system measurement, foot-pounds, used for torque readings?

On a metric ruler, hundredths are called millimeters.

A vernier caliper can measure:

Technician A says the threads on the micrometer spindle have 40 threads per inch. Technician B says one complete turn of the micrometer thimble moves the spindle 0.025 inch. Who is correct?

Name two common measurements in automotive repair that are made with feeler gauges.

Metric micrometers are being discussed. Technician A says the hub is graduated in millimeters and half millimeters. Technician B says each revolution of the thimble equals one millimeter on the hub. Which technician is right?

If a micrometer spindle must be moved a long way to adjust it, roll the ____ on your arm or hand.

The metric measurement of volume is the liter.

One liter equals:

The metric measuring system is based on:

Technician A says that a gauge block is used to measure valve lash (clearance). Technician B says that the vernier scale on a micrometer measures to 0.001". Who is right?

Name the tool used to calibrate a micrometer.

Approximately how many cubic inches are there in 1 liter?

A gauge standard is used to calibrate a micrometer.

Technician A says that one revolution of the micrometer thimble equals 1⁄40 inch. Technician B says that one revolution of the micrometer thimble equals 0.025 inch. Who is right?

A digital caliper with an LCD measures either English or metric units to an accuracy of 0.0005.

Technician A says micrometers are used primarily to measure inside diameters. Technician B says telescoping gauges are used with micrometers to measure cylinders and bearing bores. Who is right?

Which scale on the micrometer is used to measure to 0.0001"?

Technician A says one advantage of micrometers is they are clear and easy to read. Technician B says micrometers are consistent and accurate. Which technician is right?

Technician A says a vernier caliper can measure inside diameter and outside diameter. Technician B says measurements in auto industry are commonly made in hundredths of an inch. Who is right?

Engine Operation

Engine Shop Safety

Diagnosing Engine Problems

Engine Removal, Disassembly, Inspection, and In-Chassis Repairs

Cleaning the Engine

Cylinder Head: Parts and Service

Cylinder Head: Springs, Valves, and Valve Sets

Camshafts, Lifters, Timing Belts, and Chains

Cylinder Block: Inspection and Service

Crankshaft, Bearings, and Engine Balancing

Pistons, Rings, and Connecting Rods

Lubrication

Cooling System

Engine Hardware: Fasteners, Thread Repair, and Gaskets

Reassembly and Starting

Engine Breathing: Intake and Exhaust Systems

Turbochargers and Superchargers

Producing Power: Valve Timing, Power and Torque Measurement

Filters

Exam 6: Micrometer Practice

What is the metric equivalent of the English system measurement, foot-pounds, used for torque readings?

On a metric ruler, hundredths are called millimeters.

A vernier caliper can measure:

Technician A says the threads on the micrometer spindle have 40 threads per inch. Technician B says one complete turn of the micrometer thimble moves the spindle 0.025 inch. Who is correct?

Name two common measurements in automotive repair that are made with feeler gauges.

Metric micrometers are being discussed. Technician A says the hub is graduated in millimeters and half millimeters. Technician B says each revolution of the thimble equals one millimeter on the hub. Which technician is right?

If a micrometer spindle must be moved a long way to adjust it, roll the ____ on your arm or hand.

The metric measurement of volume is the liter.

One liter equals:

The metric measuring system is based on:

Technician A says that a gauge block is used to measure valve lash (clearance). Technician B says that the vernier scale on a micrometer measures to 0.001". Who is right?

Name the tool used to calibrate a micrometer.

Approximately how many cubic inches are there in 1 liter?

A gauge standard is used to calibrate a micrometer.

Technician A says that one revolution of the micrometer thimble equals 1⁄40 inch. Technician B says that one revolution of the micrometer thimble equals 0.025 inch. Who is right?

A digital caliper with an LCD measures either English or metric units to an accuracy of 0.0005.

Technician A says micrometers are used primarily to measure inside diameters. Technician B says telescoping gauges are used with micrometers to measure cylinders and bearing bores. Who is right?

Which scale on the micrometer is used to measure to 0.0001"?

Technician A says one advantage of micrometers is they are clear and easy to read. Technician B says micrometers are consistent and accurate. Which technician is right?

Technician A says a vernier caliper can measure inside diameter and outside diameter. Technician B says measurements in auto industry are commonly made in hundredths of an inch. Who is right?

Engine Operation

Engine Shop Safety

Diagnosing Engine Problems

Engine Removal, Disassembly, Inspection, and In-Chassis Repairs

Cleaning the Engine

Cylinder Head: Parts and Service

Cylinder Head: Springs, Valves, and Valve Sets

Camshafts, Lifters, Timing Belts, and Chains

Cylinder Block: Inspection and Service

Crankshaft, Bearings, and Engine Balancing

Pistons, Rings, and Connecting Rods

Lubrication

Cooling System

Engine Hardware: Fasteners, Thread Repair, and Gaskets

Reassembly and Starting

Engine Breathing: Intake and Exhaust Systems

Turbochargers and Superchargers

Producing Power: Valve Timing, Power and Torque Measurement

Filters